Transient Current Behaviour for Iron in 3.5%NaCl and 3.5%NaCl+ 1%NaNO_2 Solutions during Corrosion Fatigue

The transient current behaviour for Iron in 3.5%NaCl and 3.5%NaCl +1%NaNO2 solutions during corrosion fatigue (CF) process has been investigated at different given strain amplitudes and strain rates. The results show that elastic strain has little contribution to material dissolution. The elastic tension strain results in the decrease in the transient current, while the elastic compression strain increases the transient current. Compared to the elastic deformation, plastic deformation affects material dissolution evidently For iron in 3.5%NaCl solution, the strain amplitude plays a dominant role in the dissolution process accelerated by the plastic strain, while in 3.5%NaCl+1%NaNO2 solution, both the strain amplitude and strain rate play an important role in this process. In this paper, the effect of the elastic deformation on the material dissolution and the relation between the tension and compression current peak values under the plastic cycle deformation are discussed     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

高喷煤比操作对焦炭劣化的影响

为考查提高喷煤量对焦炭在炉内劣化的影响,在宝钢高炉上进行了风口取样研究.结果表明,喷煤量达到200 kg/t以上时焦炭劣化严重.高炉生产实绩回归显示,焦炭的热性能对高炉透气性的影响比冷强度显著.分析认为焦炭热性能指标CRI、CSR对高炉高煤比操作更重要.借此还提出了提高喷煤量和改善焦炭质量需加强研究的课题.     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。     

电双稳薄膜阻抗转变机理研究

采用真空蒸发的方法交替沉积Ag和TCNQ分子制备了Ag TCNQ金属 有机络合物薄膜 ,并研究了多种外加电压激发下膜的电阻转变特性。发现在转变过程中存在着一种能量效应 ,即当外电压超过某一阈值后 ,完成转变的能量不变。对此现象的可能解释是薄膜内分子在一定的外部电场能量诱导下发生重排 ,致使电导率发生跃变     

Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

基于ODS的数据订阅及其更新策略

随着信息技术的不断进步，企业对信息的需求在不断增大，由于职能部门繁多和不同历史条件的限制等原因，各个业务部门会根据各自信息的特点选择不同的数据库系统，如何实现这些业务系统之间数据的共享成了当前研究的课题。针对上述特定的应用，文中介绍了一种基于操作数据存储（ODS）技术的数据订阅，介绍了数据订阅的功能结构和流程。并在此基础上讨论了数据订阅的更新策略。在实际项目实施中，使用数据订阅方案达到了项目预期的目的，很好地满足了实际应用中对数据的一致性、实时性和高效性的需求。     

交流变频钻井泵试验台的研制

针对大功率、超高压（52MPa）钻井泵的试验问题，设计了采用交流变频控制技术，提高试验能力的试验台架。该试验台架体现了实用性、可操作性、高效节能、环保性；电气传动部分采用具有国际先进水平、成熟技术的交流变频调速系统，实现无级调速；机械传动部分采用单级双速变速箱，试验范围广；电控系统可完成对钻井泵各种参数在线监控和测定。