矩形件排样的一种优化算法

排样问题是一种总体资源分配问题，这里根据矩形件排样的工艺要求，提出了矩形件排样的一种近似算法，将一块板材分成三部分，每部分排一种零件，使得减料方便，提高了劳动生产率。     

港口起重机金属结构裂纹的诊断与维修

起重机金属结构常见的故障有裂纹、变形、严重锈蚀、刚度不够等。其中裂纹是门机最为常见的故障，占金属机构故障的80％以上。虽然金属结构的设计都符合常规设计的强度要求，但往往还是不可避免有裂纹产生。这是因为材料内部总难免在夹渣、气孔，加工的过程中可能有毛刺、划伤，焊接过程中存在未焊透等。在变应力的作用下，存在缺陷的部位或者应力最大部位往往最先出现疲劳裂纹，随着应力循环次数的增加，裂纹缓慢扩展直至达到临界尺寸而破坏。     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).     

论王光祈的“少年中国”理想

王光祈的“少年中国”理想，是以“少年意大利”为基础，汲取五四时期社会主义思潮的积极成分而形成的。创造“少年中国”在“人”的方面，是从改造中国少年入手，同时注重青年学生与平民的改造，注重劳动阶级、智识阶级与资产阶级的改造与联合；在“事”的方面，积极开展社会事业和社会活动，且必须经过社会分工与国际分工。可见，他的这种理想是典型的社会改革主张，在早期带有无政府主义色彩，自始至终具有强烈的民族主义情感。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

模糊规划在炼油厂生产计划优化中的应用

生产计划的编制是炼油化工企业生产经营管理中的一个关键环节，然而由于市场变化的不确定性，使得企业的长远规划制定受到限制，笔者将模糊数学应用于炼厂生产计划的编制，通过模糊规划对炼油企业生产计划进行优化，使编得的生产计划在一定程度上反映市场的变化并使企业的生产效益最优，为企业管理决策者进行长期规划给予指导，给出了实例来说明该方法的可行性。     

ISOFLUX膜——微滤膜极品

介绍一种新型的恒通量的微滤膜———ISOFLUX 膜 ,该种膜的膜通量衰减比通常的微滤膜要小得多 ,对ISOFLUX 膜的原理和数学模型进行了推导 ,并给出了对牛奶进行冷杀菌过滤的结果 .     

调幅系数为任意值的调幅波研究

本文讨论了调幅系数为任意值的调幅波，给出了它的表达式，频谱与调幅系数，调制效率和信噪比增益的计算公式。     

浅谈贵州中水公司人力资源培训与开发

文章结合水利水电行业的建设特点，着重介绍在项目管理技术日益成熟的今天如何开展水利水电项目管理人力资源的培训与开发工作。作为项目管理活动中至关重要的一个环节，人力资源培训与开发起到了及时为项目输送合适的人才，在项目管理过程中不断提高员工素质和适应力，全力推动项目进展等作用。     

浮体门设计的探索与实践

水电站泄水道破坏修复工程,是一项风险高、难度大、前景广阔的系统工程。刘家峡水电站泄水道2号孔破坏修复的关键,是采用人工深水软导向浮体闸门封堵孔口,形成门后洞内旱地施工条件;龚嘴水电站10号冲砂底孔破坏修复的关键,增设浮体闸门采用自动潜行式浮体闸门封堵孔口,形成门后洞内旱地施工条件;哈萨克斯坦CHARDARA水电站SYNAS项目泄水底孔修复的关键,采用分次降水安装浮体闸门侧支承的方法,挡住引水发电机组的下游尾水,在泄水道进口检修门和流道出口之间形成门旱地施工。此3项泄水道修复工程在行业内没有先例,难度很大。整体方案具有创新性,并且均已高质量竣工并投入正常运行。