乙烯裂解炉对流段局部结构设计改进

介绍了乙烯裂解炉对流段的结构功能,各部件局部结构的改善设计。     

青藏铁路物资储备基地建设

结合青藏铁路建设物资储备基地的实际情况，探讨了铁路线统购统发材料的管理模式及业务流程，总结出在实际工作中应借鉴的经验和注意的问题。     

Preparation and Characterization of Carboxymethyl Chitosan and β-Cyclodextrin Microspheres by Spray Drying

Three kinds of carboxymethyl chitosan/β-cyclodextrin microspheres loaded with theophylline were prepared by spray drying intended for pulmonary delivery. Mucociliotoxicity, permeation rate, and drug release characteristics of the product were investigated. The microspheres obtained by spray drying were found to be spherical with smooth or wrinkled surfaces. The mean particle size was between 3.39 and 6.06 µm. The microspheres demonstrated high product yield (43.7-50.2%), high drug loading (13.7-38.1%), and high encapsulation efficiency (86.9-92.8%). FT-IR indicated that there were interactions of theophylline with carboxymethyl chitosan matrix. Further studies on mucociliotoxicity and permeation confirmed that microspheres had better adaptability and high permeation rate. In vitro drug release from the microspheres was not related to the drug/polymer ratios.     

十二烷硫基硼酸铈的合成及摩擦学行为研究

合成了油溶性化合物十二烷硫基硼酸铈(简称CeDMB)，并用作润滑油添加剂。采用四球摩擦试验机和环—块试验机评价了其抗磨减摩性能。结果表明，十二烷硫基硼酸铈使HVI500基础油的抗磨性能得到明显改善，承载能力明显提高，摩擦系数明显降低。扫描电子显微镜(SEM)观察证实磨斑表面含有沉积物膜，结合X—射线光电子能谱(XPS)分析，可以推断添加剂在摩擦过程中发生摩擦化学反应，生成的Ce2O3、CeO2和B2O3沉积在摩擦副表面，形成润滑膜，从而改善其抗磨减摩性能。     

不锈钢椭圆封头热压制裂纹分析

热压制是压力容器封头制造中常见的工艺之一。对不锈钢椭圆封头,其压制工艺过程特殊。通过一次质量事故分析,提出了不锈钢椭圆封头热压制过程中影响裂纹形成的因素。     

Hartstoffschichten für das Pressen und Prägen von Gläsern bei hohen Temperaturen

Hard and wear resistant coatings for the moulding and embossing of glasses at elevated temperatures Hard and wear resistant coatings of Titanium Aluminium Nitride TiAlN were deposited on various substrates by the application of different reactive deposition processes: RF-magnetron-sputtering, ion beam-sputtering and by the energetic cluster impact (ECI) process. The deposition of the coatings was performed under variation of biasing conditions and of process parameters such as pressures and flow rates of the process gases argon and nitrogen as well as of energies of species hitting the substrate surfaces. The microstructure particularly the growth morphology of several films was investigated by pictures of film cross sections recorded by transmission electron microscopy. Residual intrinsic film stresses were analyzed by measuring deflections of substrates in an interference optical microscope before and after the deposition of the coatings. By heating coated substrates and in-situ observation of deflections at elevated temperatures dependencies of thermally induced stresses on temperatures and variations of intrinsic stresses due to changes within the films could be analyzed and related to microstructure and growth conditions. In the paper specific characteristics of the deposition processes occuring on the scale both of atoms and of clusters which may contain several thousand of atoms are described and related to microstructure, residual stress states and damaging conditions. Different contributions to residual film stresses are analyzed on the base of theoretical considerations taking into account deposition kinetics and thermomecanical properties. The significance of achieved film properties for application, i. e. for the coating of tools for the manufacturing of optical components by moulding and embossing of glasses is discussed.     

硬质合金与铁基复合材料热等静压扩散连接

以烧结结态硬质合金和粉末态铁基复合材料为连接对象，研究了两种材料的热等静压扩攻连接工艺，获得了直接连接接头和加镍作中间过渡层的间接连接接头，考察了接头的结合界面形貌，界面的元素扩散和界面结合强度。     

稀土萃取信息系统

应稀土化学发展的需要,我们组建了稀土萃取信息系统。其中包括:数据的来源和数据类型;数据的组织;检索功能;数据间的关联;最优化设计以及萃取剂结构与其物理性质和结构与萃取性能的相关分析研究。     

第十九讲 电机控制集成电路的选用二相步进电机驱动电路SAA1042的选用

MOTOROLA公司生产的SAA1042芯片用来控制并驱动二相步进电机，文中对其主要特点，引脚功能，技术指标，典型应用等作了介绍。     

矫直状态下钢管弹塑性变形区的研究

根据钢管矫直时的变形规律，通过对矫直中钢管的力学状态及矫直前后的状态参数分析，建立了一种适于现场应用的确定钢管弹、塑性变形区的新方法。