浅谈碾压混凝土的施工技术

介绍碾压混凝土坝发展的历程，简述了碾压混凝土筑坝技术以及施工工艺、特点、程序、质量控制等相关方面的施工经验。     

遮掩式低回波金属支架的设计

本文推出了一种具有固定遮掩屏的低ＲＣＳ金属支架系统；介绍了其主要特点及设计方法；计算了该支架了多种数学模型的散射截面分布；试验研究了优化支架模型的散射特性。本文的计算及试验结果对于设计制做产用回波金属目标支架具有重要的参照价值。     

Experimental observations on flow characteristics in an open two-phase natural circulation loop

The flow behavior in an open two-phase natural circulation loop was studied experimentally using Freon-113. The heat flux, inlet- and exit-restrictions, liquid charging level and inlet subcooling were taken as parameters. As a result, three basic circulation modes were observed with variation of the heat flux: periodic circulation (A), continuous circulation, and periodic circulation (B). Of these modes, only the continuous circulation mode was stable and the maximum circulation rate appeared with this mode. An increase in the inlet-restriction and/or decrease in the exit-restriction broadened the range of the continuous circulation mode and stabilized the system. When the liquid charging level was lowered or the inlet subcooling was decreased, the continuous circulation mode started at a lower heat flux and the system became stable. The results are summarized on instability maps in the plane of heat flux vs. inlet subcooling.     

电致伸缩陶瓷微位移器非线性的数值方法补偿

本文通过对电致伸缩陶瓷材料的非线性进行分析。找到了补偿电致伸缩陶瓷非线性的数值方法，并对不同回程大小的电滞回线进行了分段处理，使补偿结果更为精确。     

熔模石膏型混合材料性能及焙烧工艺的研究

本文研究了诸因素对石膏型混合材料性能的影响，选择出合理的、廉价的造型材料配方及焙烧工艺．试验结果表明，这类混合材料尺寸稳定性高、强度适中、耐热性好，其焙烧工艺操作简便，易于控制．     

4×622Mb／sWDM40km光通信系统实验

本文完成了我国第一个４×６２２Ｍｂ／ｓ波分复用（ＷＤＭ）光通信系统实验，使单根光纤线路通信容量达２．４Ｇｂ／ｓ。该系统以ＤＦＢ－ＬＤ为光源，工作波长在１．５５μｍ附近，ＬＤ的工作频率稳定度优于±１５０ＭＨｚ，信道间隔２ｎｍ左右，无中继传输距离为４３．６ｋｍ，采用Ｆ－Ｐ调谐光滤波器作为解复用器，接收机灵敏度达－３０ｄＢｍ。     

Integrated scheduling of flexible manufacturing systems employingautomated guided vehicles

Centralized and distributed automated guided vehicle system (AGVS) models for materials handling, and the model for part processing are integrated into a single coherent model. This formulation can be used to collectively schedule and control the entire flexible manufacturing system (FMS) as opposed to the traditional separate scheduling of part processing and material handling. The two AGVS models are based on Petri nets and can be directly used in the scheduling method that uses Petri nets for formulation and heuristic search for solution. This method employs a global search to seek the optimal operation of an entire FMS. Scheduling examples are presented and the method compares favorably with the results simulated using heuristic dispatch rules     

球铁管表面喷锌机的设计与研究

球铁管是我国“九五”和“十五”期间大力推广和发展的项目 ,在大量的设计和应用基础上 ,对球铁管生产使用的重要设备之一———表面喷锌机进行了系统的研究与分析 ,提出了相关的设计思想和方法。对于提高表面喷锌机的使用性能和生产效率具有重要意义     

OSEK/VDX——汽车电子系统的开放式平台

介绍了当前在国际汽车工业界日益占据主导地位的汽车电子系统开放式平台--OSEK/VDX体系.详细地论述了这种体系的由来、运行机制和最新的发展动向,以及它对汽车电子技术发展的深远影响.