熟料烧结过程中氧化铁反应行为的热力学分析

通过对Fe2O3与碳酸钠、氧化钙以及硅酸钙反应的热力学分析,明确Fe2O3在铝土矿炉料烧结过程中的热力学反应规律。热力学计算、分析结果表明:Fe2O3在正常烧结温度范围内能与Na2CO3或CaO发生反应,但更易与CaO反应形成2CaO.Fe2O3或CaO.Fe2O3,Fe2O3和Na2O.Fe2O3能使2CaO.SiO2和3CaO.2SiO2转变为CaO.SiO2,CaO.SiO2进一步与Na2O.Al2O3或Na2O.Fe2O3反应生成不溶的三元化合物而造成烧结法生产氧化铝过程中Na2O和Al2O3的损失。4CaO.Al2O3.Fe2O3不能由铁酸钙和铝酸钠相互反应产生,而可能是CaO、Al2O3和Fe2O3三者直接反应的产物,且在烧结条件下Na2O.Fe2O3可分解4CaO.Al2O3.Fe2O3。     

研究合金定向凝固组织的脉冲磁场设备的研制

介绍了脉冲电磁场发生设备的工作原理 ,设计等。并介绍了其如何与合金的定向凝固设备结合 ,以实现对合金的定向凝固组织在脉冲电磁场作用下的研究。     

高耐蚀性热镀锌板的钝化处理工艺探讨

介绍了热镀锌板钝化膜的形成机理 ;针对攀钢热镀锌板出现白锈、黑斑等问题 ,分析了钝化液pH值、添加剂及操作条件对钝化膜质量的影响 ,同时提出了改进热镀锌板耐蚀性能的措施     

Microstructure Evolution of Intermetallics Produced by Laser Powder Deposition

NiAl intermetallic alloys are potential high temperaturestructural materials in aeronautical and astronauticalindustries[1].However,the poor ductility andtoughness at room temperature severely restrict theirengineering applications[2,3].It is important todevelop new technology to product intermetallicmaterials for the improvement of the comprehensiveproperties and the workability.Laser powder depositionhas been used to synthesize many new materials.Furthermore,if incorporated with rapid proto…     

泡沫塑料表面的磁控溅射镀膜技术研究

对硬质聚氨酯泡沫塑料进行适当的前处理(涂刮不饱和聚酯腻子和喷涂双组份聚氨酯清漆),再采用磁控溅射镀膜技术对其进行紫铜T2镀膜,能够有效地降低泡沫塑料的吸水率,提高尺寸稳定性.     

EFFECT OF γ-IRRADIATION ON CuZnAl SHAPE MEMORY ALLOY

用透射电子显微镜和正电子湮没等分析手段,研究了CuZnAl形状记忆合金的γ辐照效应,此合金经一定剂量的γ辐照后,马氏体转变温度明显提高,而形状记忆功能仍保持不变。     

双端制动器惯性试验台的设计

随着我国汽车工业的迅猛发展,汽车产量不断增多,车速越来越高,对汽车制动性能要求也越来越高。汽车制动器是汽车上的重要设备,其质量的好坏影响着行车的安全。电惯量模拟是近几年兴起的一种比较先进的负载模拟方法,文章就制动器惯性试验台系统结构以及电惯量模拟的方法进行了比较详细的说明。     

真空水冷铜坩埚感应炉模糊控制专家系统的研究

研究真空水冷铜坩埚感应炉中模糊控制专家系统。阐述该炉控制系统复杂性 ,介绍模糊控制专家系统的主要结构和各主要部分的功能和一些算法     

(Short communication) Degradation of corrosion resistance of Zircaloy-4 in LiOH aqueous solution

To investigate the degradation of corrosion resistance of Zircaloy-4 in LiOH aqueous solution, SIMS (secondary ion mass spectrometry) analysis was performed to examine the profiles of Li~ , K~ , and OH~- in oxide layers formed in the same concentration (0.1 mol/L) LiOH and KOH solutions. Even though the oxide layers have an equal thickness, the penetration depth of K~ is shallower than that of Li~ , and the penetration depth of OH~- corroded in KOH solution is also shallower than that corroded in LiOH solution. It shows that the diffusion of OH~- into oxide layer is accompanied by the corresponding cation. The difference of degradation effect of LiOH and KOH solutions on the corrosion resistance of Zircaloy-4 was discussed.     

Influence of electroplating conditions on magnetic properties of Fe-36wt.% Ni alloy film

A Fe-Ni soft magnetic film was prepared in sulphate solution by electroplating. The influences of the molar ratio of n [Fe2+ ]/ n [Ni2+ ], current density, bath temperature, pH and L-ascorbic acid concentration on magnetic properties of Fe-Ni alloy film were investigated. The results show that the saturated flux density(BS) of the film increases initially and decreases after it reaches the specific value with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density, bath temperature and pH. However, the relationship between L-ascorbic acid concentration and B S keeps linear. It is observed that the coercive force( Hc) is enhanced with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density and pH. By comparison, when the bath temperature increases, Hc always decreases. With the increase of L-ascorbic acid concentration, the coercive force increases initially and then decreases.