Assessing the effects of hydrological and chemical stressors on macroinvertebrate community in an Alpine river: The Adige River as a case study

In this study, the combined effects of hydrological and chemical stressors on benthic macroinvertebrates were evaluated in order to explore the response of the biological community to multiple stressors. The Adige River, located in the south‐eastern Alps, was selected as a case study because representative of the situation of a large river in which the variety of stressors present in the Alpine region act simultaneously. As expected, streamflow showed a seasonal pattern, with high flows in the spring–summer period; however, locally, the natural hydrological regime was altered by the presence of hydropower systems, which chiefly affected low flows. Multivariate analysis showed seasonal and spatial patterns in both chemical and hydrological parameters with a clear gradient in the concentration of nitrate, personal care, and pharmaceutical products moving from headwaters to the main stem of the river. The macroinvertebrate community composition was significantly different in summer and winter and between up and downstream sites. Streamflow alteration chiefly due to water use by hydropower affected community composition but not richness or diversity. Gammarus sp., Hirudinea, and Psychomyia sp., were positively correlated with flow variability, increasing their densities in the sites with higher streamflow variability because of hydropeaking. The results obtained in this study show that the composition of the macroinvertebrate community responded to seasonality and to changes in the main stressors along the river and highlights the importance of the spatial and temporal variability of stressors in this Alpine river. Taking into account, this variability will help the decision‐making process for improving basin management.     

Studies on the dechlorination and detoxificaton of organochlorine compounds. I. PCBs and PCNs

In the analysis of organochlorines such as polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs), levels of, for example, PCB concentration are often expressed as a ‘total PCB’ value, using a straight GC pattern-matching technique with electron capture detection. Such methods provide little information about the identity of the individual components. In the present study, preliminary investigations using dechlorination with a NiCl₂/NaBH₄ catalyst indicated that the technique offered a comprehensive method for the analysis of PCBs and PCNs, as well as a method of detoxification of the ‘priority pollutants’ . This paper reports the use of capillary column GC-MS with an ion trap detector (ITD^TM) for the analysis of a number of PCBs and PCNs, including the commercially produced Aroclor 1254 and 1221, employing this dechlorination technique.     

Nanocomposites of SnO2 and g-C3N4: Preparation,characterization and photocatalysis under visible LED irradiation

Tin dioxide nanoparticles were prepared in the presence of graphitized carbon nitride (g-C₃N₄) forming nanocomposites with different contents of SnO₂ up to 40 %. G-C₃N₄ was synthetized by heating of melamine at 550 °C in the open air and Sn²⁺ ions were precipitated by sodium hydroxide in g-C₃N₄ aqueous dispersions. Resulting mixtures were dried by freezing at ?20 °C and calcined at 450 °C to obtain SnO₂/g-C₃N₄ nanocomposites.The nanocomposites were characterized by common characterization methods in solid state and in their aqueous dispersions using dynamic light scattering (DLS) analysis and photocatalysis. SnO₂ nanoparticles in the nanocomposites were found to have an average size of 4 nm, however, those precipitated without g-C₃N₄ had an average size of 14 nm. Separation of photoinduced electron and holes via heterojunction between SnO₂ and g-C₃N₄ was demonstrated by photocatalytic decomposition of Rhodamine B (RhB) under LED visible irradiation (416 nm) and photocurrent measurements. The most photocatalytically active nanocomposite contained 10 % of SnO₂. Graphitized carbon nitride was assumed to serve as a template structure for the preparation of SnO₂ nanoparticles with a narrow size distribution without using any stabilizing additives.     

LaMgAl11O19 synthesis using non-hydrolytic sol-gel methods

Polycrystalline LaMgAl₁₁O₁₉ (LMA) was prepared by four different non-hydrolytic sol-gel methods. From stable solutions, four powder precursors containing an amorphous and nanocrystalline phase with specific reactivity were obtained. The particle size, morphology, thermal behaviour, and phase composition of the powder precursors were studied using DLS, TEM, DSC/TG and XRD. Bulk ceramic samples containing LMA were prepared at 1200?°C for 16?h and examined in terms of phase purity and microstructure using XRD, SEM, and TEM. Raman spectroscopy of pure LMA was used to study the structure in detail. A mechanism of LMA formation and a relation between powder precursor properties and final phase composition is proposed. These findings may be useful for designing modern technologies for fabrication of LMA for optical or protective coating applications.     

On augmenting database schemas by latent visual attributes

Knowledge and Information Systems - Decision-making in our everyday lives is surrounded by visually important information. Fashion, housing, dating, food or travel are just a few examples. At the...     

Hydrophilic polycarbonate chips for generation of oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions

Modification of the surfaces of polycarbonate (PC) with the use of a solution of tin (II) chloride renders them hydrophilic. The surface draping is stable against exposure to water and to alcohols. Exposure to alkanes reduces but does not diminish the effect. The method is compatible—in using the same solvent and temperature—with the hydrophobic modification of PC Jankowski et al. ( Lab Chip 11:748–752, 2011). The combination of these methods makes it possible to generate single and multiple monodisperse emulsions with the use of flow-focusing junctions in systems made in PC—material that is suitable for fabrication of multilayer, high throughput microfluidic devices.     

System approach to modeling of liver glucose metabolism with physiologically interpreted model parameters outgoing from [18F]FDG concentrations measured by PET

New mathematical models from physiologically interpreted parameters capable of evaluating glucose metabolism within the liver and/or the whole body were developed. The group of pigs in a fasting state and the group of pigs with euglycemic supraphysiological hyperinsulinemia were scanned by positron emission tomography after a single dose of [(18)F]FDG tracer. Simultaneously frequent sampling of the dynamic data of [(18)F]FDG plasma concentration in artery, portal vein and hepatic vein was obtained. A system approach to the liver and/or the whole-body system by the tools of linear dynamic sysztem theory was used. Three kinds of structural models, single input and single output or multiple outputs and multiple inputs and single output, were identified. Differences between the group of fasting pigs and the group of pigs in euglycemic supraphysiological hyperinsulinemia were identified by estimated parameters of the structural models. The suitability of the structural mathematical models for the estimation of physiologically interpreted parameters from PET was validated.     

Parallel interval-based reasoning in medical knowledge-based system Clinaid

The paper continues a series of papers and a monograph [33], where we have described the conceptual structures as well as the basic architecture of a knowledge-based systemCunaid.     

Hydrophilic polycarbonate chips for generation of oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions

Modification of the surfaces of polycarbonate (PC) with the use of a solution of tin (II) chloride renders them hydrophilic. The surface draping is stable against exposure to water and to alcohols. Exposure to alkanes reduces but does not diminish the effect. The method is compatible—in using the same solvent and temperature—with the hydrophobic modification of PC (Jankowski et al. in Lab Chip 11:1151–1156, 2011). The combination of these methods makes it possible to generate single and multiple monodisperse emulsions with the use of flow-focusing junctions in systems made in PC—a material that is suitable for fabrication of multilayer, high-throughput microfluidic devices.