Electrooptic polarization modulation in multielectrode AlxGa1-xAs rib waveguides

A single mode rib waveguide (RWG) polarization modulator is described with a measured extinction ratio ≳27 dB, a power conversion ≈0.99, and a switching voltage of 12.5 V atlambda = 1.064 mum. The modulator is based on a modified stepDeltabeta-reversal configuration. Contact with CdO and an Au overlay ensures low optical losses (lsim1cm^-1) for both polarizations.     

Quantitation of vitamin K in human milk

A quantitative method was developed for the assay of vitamin K in human colostrum and milk. The procedure combines preparative and analytical chromatography on silica gel in a nitrogen atmosphere followed by reversed phase high performance liquid chromatography (HPLC). Two HPLC steps were used: gradient separation with ultraviolet (UV) detection followed by isocratic separation detected electrochemically. Due to co-migrating impurities, UV detection alone is insufficient for identification of vitamin K. Exogenous vitamin K was shown to equilibrate with endogenous vitamin K in the samples. A statistical method was incorporated to control for experimental variability. Vitamin K₁ was analyzed in 16 pooled milk samples from 7 donors and in individual samples from 15 donors at 1 month post-partrum. Vitamin K₁ was present at 2.94±1.94 and 3.15±2.87 ng/mL in pools and in individuals, respectively. Menaquinones, the bacterial form of the vitamin, were not detected. The significance of experimental variation to studies of vitamin K in individuals is discussed.     

Genetic design of bioactive glass

This paper reviews the discovery that controlled release of biologically active Ca and Si ions from bioactive glasses leads to the up-regulation and activation of seven families of genes in osteoprogenitor cells that give rise to rapid bone regeneration. This finding offers the possibility of creating a new generation of gene activating glasses designed specially for tissue engineering and in situ regeneration of tissues. Recent findings also indicate that controlled release of lower concentrations of ionic dissolution products from bioactive glasses can be used to induce angiogenesis and thereby offer potential for design of gene activating glasses for soft tissue regeneration.     

A novel method of making PVF porous foam without using the pore forming agent

Different with the conventional method of manufacturing poly(vinyl formal) (PVF) porous foam by using the pore‐forming agents such as wheat or potato starches, a novel method without using the pore‐forming agent is introduced in this article. Through the help of images taken by a scanning electron microscope, the formation process of the present PVF foam will be discussed in terms of the spinodal decomposition (SD) phase separation principle. Additionally, the effect of poly(vinyl alcohol) concentration and reaction temperature on the pore structure of the PVF foam will be investigated. Moreover, the water adsorption capacities of the PVF foams obtained by the present method will be studied in details through the analyses of pore‐size distribution, mechanical modulus, and thermal property. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41270.     

Dual bases for spline spaces on cells

The purpose of this paper is twofold. First, we extend the basic dimension result for spline spaces on simple cells to a class of spline spaces which satisfy additional smoothness conditions at the interior vertex. This extension is useful for the study of super spline spaces. Secondly, and more importantly, we show how to choose minimal determining sets of Bézier coordinates for these spaces. These in turn are useful for constructing explicit locally supported bases for spline spaces on general triangulations.     

Chemical characterization of fruit and fungal volatiles attractive to dried-fruit beetle,Carpophilus hemipterus (L.) (Coleoptera: Nitidulidae)

The chemical basis underlying orientation to fruit and fungal odors was investigated for the dried-fruit beetle,Carpophilus hemipterus (L.). In wind-tunnel bioassays of walking and flight response from 1.8 m, beetles were attracted to odors of the yeastSaccharomyces cerevisiae on agar, aseptic banana, or banana inoculated withS. cerevisiae, although both banana substrates elicited greater response than the yeast alone. When presented in a two-choice bioassay, the yeast-inoculated banana attracted approximately twice as many beetles as did the aseptic banana. GC-MS analysis of the headspace volatiles above these odor sources revealed a somewhat more complex and concentrated volatile profile for yeast-inoculated banana than for aseptic banana. The odor from yeast on agar had fewer components, and these were present at lower concentrations than the odors of either banana substrate. By blending mineral-oil or aqueous solutions of the 18 components of inoculated-banana odor in varying concentrations, it was possible to mimic closely the headspace profile of the natural odor. This synthetic odor also elicited beetle attraction in the wind tunnel at levels comparable to the inoculated banana. Through a series of bioassays in which individual components were subtracted from or added to a synthetic odor blend, it was determined that ethyl acetate, acetaldehyde, 2-pentanol, and 3-methylbutanol comprised the simplest blend of compounds evoking full behavioral response. However, 2-methylpropanol or butanol were apparently interchangeable with 3-methylbutanol in this blend, and comparable response could also be elicited by replacing acetaldehyde with a combination of both 2-pentanone and 3-hydroxy-2-butanone. Thus, our results suggest that this generalist insect herbivore locates its hosts by a long-range response to a variety of blends of common fruit volatiles, whose concentrations are enhanced by fungi.     

Incidence and severity of Arcanobacterium pyogenes injection site abscesses with needle or needle-free injection

Nursery-age pigs (n=198) were used to evaluate the difference in abscess formation at needle-free jet and conventional needle-and-syringe injection sites. Needle-free jet injection was used to administer injections in the neck and ham on one side of the animal whereas needle-and-syringe was used for neck and ham injections on the opposite side. Immediately prior to injection, the injection site surfaces were contaminated with an inoculum of Arcanobacterium pyogenes. Each pig was humanely euthanized 27 or 28days after injections. Histopathological results showed that needle-free jet injection was associated with more abscesses than needle-and-syringe injection at both neck (P=0.0625) and ham (P=0.0313) injection sites. Out of 792 injection sites, only 13 abscesses were observed, with 12 of those present at needle-free jet injection sites. Needle-free jet injection may increase the occurrence of injection site abscesses that necessitate carcass trimming at pork processing plants.     

Quantitative and temporal analysis of effects of twospotted spider mite (acari: Tetranychidae) female sex pheromone on male guarding behavior

Responses of male twospotted spider mite,Tetranychus urticae (Koch), to female sex pheromone were described by a glass slide bioassay and computerized pathway digitizer. Pheromone was extracted from quiescent deutonymphs and fractionated by HPLC, and responses of guarding males to each fraction, all fractions combined, unfractionated extract, and a hexane control were bioassayed for 6 min. Mean angular velocities, linear velocities, percent time stationary, and distance from the 3-mm-diameter treatment circle were calculated for each mite at 20-sec intervals and these behavioral parameters regressed on time. Analysis of variance of regression-equation intercepts showed that no differences in initial male angular velocities were observed among treatments, but initial linear velocities were greater in response to all fractions combined and to extract than to individual fractions, and greater in response to individual fractions than to the control. Angular velocities decreased and linear velocities increased more rapidly in response to individual fractions than to all fractions combined and extract, while males turned preferentially in one direction and were stationary (no displacement) more often in response to all-fraction combinations than to individual fractions and the control. Significant differences were observed among the parameter values elicited by individual fractions, suggesting that active fractions differed qualitatively. The described changes in movement parameters show that maleT. urticae response to presence of pheromone occurs almost immediately, and that multiple pheromonal components are necessary to elicit maximum male response. The overall effect of pheromonal components was to decrease the rate at which males moved away from the treatment cycle, thereby causing male arrestment.     

In vitro and in vivo antioxidant properties of the plant-based supplement greens+™

Dietary antioxidants play an important role against oxidation, an underlying mechanism in the incidence of chronic diseases. Greens+ is a commercially available preparation containing a variety of plant-derived ingredients. The aim of the current study was to evaluate the antioxidant potential of the methanolic extract of greens+ powder using in vitro and in vivo techniques. In vitro studies were conducted using a liposome model system to simulate biological cell membranes. Total antioxidant potential and polyphenol content of the herbal preparation was measured. For in vivo analysis, 10 healthy human subjects consumed either three or six teaspoons of greens+ per day for four weeks. Blood samples were analyzed at baseline and at the conclusion of the treatment period for total antioxidant capacity, polyphenol content, protein, lipid and LDL oxidation, and the level of glutathione peroxidase. Results showed that greens+ supplementation was well tolerated and increased serum antioxidant potential at higher levels of intake in a dose-dependent manner. HPLC analysis showed the presence of quercetin, apigenin, kaempferol and luteolin in the supplement. Plasma analysis indicated the presence of kaempferol only. A statistically significant (p < 0.05) reduction in protein and lipid oxidation was observed. Based on its antioxidant properties, the results suggest that greens+ might play a role in reducing the risk of chronic diseases involving a burden of oxidative damage.     

Chemistry of the Interface Between Aluminum and Polyester Films

It has been observed that the adhesion between vacuum-evaporated aluminum and poly(ethylene isophthalate-co-ethylene sodium sulfoisophthalate) copolymer is approximately five times greater than the adhesion between vacuum-evaporated aluminum and biaxially-oriented poly(ethylene terephthalate) film. To describe the interface between the aluminum and these polymeric substrates, thermoanalytical, spectroscopic and microscopic techniques have been applied. Definite changes in surface elemental composition and chemical functionality occur upon metallization of the polymer films. Aluminized samples contained two new oxygen functionalities; one due to the aluminum oxide and the other due to an organoaluminum species. Thermal degradation, as may occur during vacuum evaporation, would be expected to yield a carboxylic acid endgroup and a vinyl endgroup for each chain scission reaction that occurred. Reaction of aluminum with these carboxylic acid endgroups is thought to be responsible for the organoaluminum oxygen peak that was observed. Based on the XPS data, however, the level of this new functionality was comparable for both types of polyester film. Thus, this new functionality may be involved in promoting aluminum/polyester adhesion, but by itself cannot explain the differences in the level of adhesion that are attained. It appears, based on the transmission electron micrographs, that the aluminum deposit penetrates the copolymer coating to a greater depth than it does the PET. The greater level of penetration could be responsible for the greater adhesion obtained between vacuum-evaporated aluminum and the copolymer film compared with the level of adhesion obtained with the PET film. Based on this work, it appears that the adhesion of the vacuum-evaporated aluminum to both polyesters has a similar chemical component (type and amount) but a different extent of the mechanical component.