Comparison of chlorophyll a concentration detected by remote sensors and other chlorophyll indices in inhomogeneous turbid waters

A new analytical approach for retrieval of the vertically weighted chlorophyll a concentration (Chl(rs)) detected by remote sensors is presented. Model calculations were carried out for the turbid waters of Lake Kinneret, Israel, and showed that Chl(rs) may be replaced by the average chlorophyll a concentration (Chl(p)) within the upper "penetration layer" 0-Z(p). The study also showed a high correlation between Chl(rs) and Chl concentration averaged in the other depth layers, namely, the 0-1 m layer, the euphotic layer (0-Z(e)), and the production layer (0-Z(pr)). Our findings are closely related to models developed for the world ocean, with the exception of periods when the dinoflagellate Peridinium gatunense blooms in the lake. We showed the effect of the pattern of vertical Chl distributions within the penetration layer on the difference between Chl(rs) and other Chl indices was conspicuous when the Chl maximum was in the uppermost 0- m layer of the water column. We assume that the presented approaches are instrumental for further development of optimal, locally adapted algorithms for remote sensing of Chl in any type of natural waters.     

如何选择平锻机

平锻机用于长杆类锻件局部多工位成形,可完成镦粗、冲孔、切边、镦挤、切断、弯曲等工作(图1)。平锻机一般有垂直分模式平锻机和水平模式平锻机两种。锻模分模方式给平锻机结构带来了明显的差别。垂直分模式平锻机在最近30～40年虽结构上变化不大,但耐用性逐步提高,表现在其自身的刚性、工艺适应性及能耗指标均有改善;水平分模式平锻机则相比之下仍处于研制和完善过程之中。1两种平锻机的比较(1)垂直分模式平锻机该类平锻机可靠性高,使用寿命长,工作区域操作方便,锻模更换容易,氧化皮易于从工作区域清理,提高了锻模的寿命。但该类平锻机难于…     

Byzantine Agreement Given Partial Broadcast

This paper considers unconditionally secure protocols for reliable broadcast among a set of n players, where up to t of the players can be corrupted by a (Byzantine) adversary but the remaining h = n - t players remain honest. In the standard model with a complete, synchronous network of bilateral authenticated communication channels among the players, broadcast is achievable if and only if 2n/h < 3. We show that, by extending this model by the existence of partial broadcast channels among subsets of b players, global broadcast can be achieved if and only if the number h of honest players satisfies 2n/h < b + 1. Achievability is demonstrated by protocols with communication and computation complexities polynomial in the size of the network, i.e., in the number of partial broadcast channels. A respective characterization for the related consensus problem is also given.     

Adsorption and desorption dynamics of associative polymers onto particulates of titanium dioxide,alumina and quartz

The authors have been investigating the adsorption and desorption dynamics of nonionic water soluble polymers on inorganic particles. The influence of the nature of polymers with and without associating hydrophobic end groups, the nature of adsorbents [TiO₂, Al₂O₃ (neutral, acid and basic), and SiO₂], polymer concentrations, linear velocity of fluids, and mutual diffusion of polymer molecules on the patterns of adsorption and desorption distribution of polymer concentrations are shown. The model polymer is a nonionic polyurethane polymer based on ethylene oxide. The polymer's structure is R-O-(DI-PEO)₆-DI-O-R (R is C₁₆H₃₃, DI is isophorone diisocyanate, and PEO is CARBOWAX^TM with a molecular weight of 8200). The phenomenological models of association and dissociation kinetics of associative polymers are suggested. The half-lives of clusters into adsorption and desorption layers are estimated. It is shown that heats of desorption of associative polymers are dependent essentially on heats of dissociation of clusters.     

Synchronized External Pulsation for Improved Tolerance to Acceleration Stress: Model Studies and Preliminary Experiments

Synchronized external pulsation is proposed as a method to improve tolerance to acceleration stress. This technique uses a modified anti-G suit which is pressurized and depressurized synchronously with the heart cycle. The feasibility of the procedure has been studied using a computer model of the cardiovascular system which includes the effects of Gz stress, and contains simulations of baroreceptor control of heart rate and venous tone. Model predictions indicate that for unprotected subjects, carotid pressure at eye level (ophthalmic artery pressure) decreases to 20 mmHg (beginning of central light loss) at approximately +3.6 Gz. Applying standard anti-G suit pressure to the model increases this level to 5.3 Gz. When synchronized external pulsation of 2 psi is superimposed on the standard anti-G suit pressure, the tolerance to acceleration stress is further augmented by at least 0.9 G above the protection afforded by the standard anti-G suit alone. A set of preliminary experiments on human subjects to test the feasibility of using the technique in the high-G environment has also been carried out. The results under various protection modes compare favorably to the model predictions. Our results suggest that the computer model presented here is a useful tool for studying cardiovascular responses under +GZ stress. It also indicates that using synchronized external pulsation pressure superimposed on the standard anti-G suit pressure may offer extra protection to acceleration stress.     

Fracture analysis of materials with periodic microstructure by the representative cell method

The periodic structure of some natural and especially man-made materials can be manifested not only on an atomic but also on a larger scale. Investigation of mechanical properties of these materials usually hinges on well-developed homogenization methods. On the other hand, these methods are not suitable for fracture analysis where the knowledge of the local stress-strain fields near a flaw (a crack) is required. The result is obtained by the use of the representative cell method based on the discrete Fourier transform. This method enables one to determine the exact stress distribution in a periodic structure subjected to arbitrary loading. Direct application of the method is impossible since the crack violates the translational symmetry defined by the material microstructure. This obstacle is overcome by application of the fictitious loading to the uncracked body at the line where the crack is to be located. The amplitude of the loading is adjusted in order to fulfill the boundary conditions imposed on the crack faces. The compatibility equation for deriving this amplitude is obtained by the use of the corresponding Green function, which is found in a closed form. Fracture problems for the two types of materials with a periodic microstructure are considered. The first one is a composite material consisting of dissimilar isotropic elastic layers arranged periodically. The second periodic microstructure is a 2D infinite beam lattice modeling a cellular material. The analysis of the failure process in the latter case shows that in contrast to the case of homogeneous material, the crack propagation path is not defined by the condition of zero Mode II stress intensity factor.     

An extended Krylov subspace method to simulate single-phase fluid flow phenomena in axisymmetric and anisotropic porous media

We develop and validate a novel numerical algorithm for the simulation of axisymmetric single-phase fluid flow phenomena in porous and permeable media. In this new algorithm, the two-dimensional parabolic partial differential equation for fluid flow is transformed into an explicit finite-difference operator problem. The latter is solved by making use of an extended Krylov subspace method (EKSM) constructed with both positive and inverse powers of the finite-difference operator. A significant advantage of the method of solution presented in this paper is that simulations of pressure can be obtained at a multitude of times with practically the same efficiency as that of a single-time simulation. Moreover, the usage of inverse powers of the finite-difference operator provides a substantial increase in efficiency with respect to that of standard Krylov subspace methods. Tests of numerical performance with respect to analytical solutions for point and line sources validate the accuracy of the developed method of solution. We also validate the algorithm by making comparisons between analytical and numerical solutions in the Laplace transform domain. Additional tests of accuracy and efficiency are performed against a commercial simulator for spatially complex and anisotropic models of permeable media.     

M-ary sequential detection under conditions of a priori uncertainty

Sequential detection under conditions of a priori uncertainty is investigated. A MAP sequential detector is developed and its performance is evaluated using mean path approximation. The result obtained are verified via comparison with previously published computer simulation research. The comparison shows a good agreement between theory and experiment. The sequential approach is shown to provide a greatly reduced error rate as compared with one nonsequential approach under the same signal/noise conditions.     

Time factor in mathematical models of geologic and technical processes

Objects of geological investigations, with subsequent technologic impact (e.g., secondary and tertiary recovery) on them, are dynamic systems. They change either in geologic or “technologic” time scale. Thus, in order to develop adequate models of geologic and technologic processes, it is necessary to introduce time factor.The writers offer two methods in constructing such models: analytical and statistical. They allow construction of a series of models for geologic and geotechnologic processes, such as (1) compaction of sediments, (2) development of geofluidal pressures (pore fluid pressures), (3) accumulation of hydrocarbons at depth and in local traps, (4) changes in water saturation of reservoir during its development, and (5) changes in physical and reservoir properties of rocks with time. The writers propose algorithms for computer analysis of data. All models found application in solving practical and theoretical exploration and development problems of oil and gas deposits.