电感电容损耗电阻的讨论

通过对电容电感阻抗的测量，发现实验值偏离理论值。定性地分析了误差的来源，得出的结论是电感电容内部的损耗电阻随着频率的变化而变化，变化方向相反而并非相同。     

并捻器成型工艺及模具设计

在仔细分析并捻器零件工艺特点的基础上 ,设计制造了并捻器压铸模 ,针对压铸过程中遇到的问题对模具进行了改进 ,并对铝合金原材料和铝合金的熔炼过程进行了重点控制 ,取得了良好的效果。     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

基于支持向量机的旋转机组状态趋势预示技术

本文主要介绍了支持向量机在旋转机组状态趋势预示中的运用。通过对某旋转机组的振动烈度进行预测,并将其结果与使用时间序列进行预测的结果相比较,发现使用支持向量机进行预测的结果更好。     

气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。     

提高磷酸二铵产品质量方法浅析

针对磷酸二铵(DAP)产品养分波动大、含水量偏高、易结块、颜色变化大等缺点,在生产过程中采取了相应的解决措施,如配矿、联产、设备改造、工艺指标调整等,使DAP装置不仅保持了原有的优点,而且产品质量问题也得到了有效解决。养分基本保持在64.0%~64.6%,水分下降到2.1%~2.2%,结块现象较少,颜色也比较统一。     

百菌清及其三氟衍生物对番茄早疫病菌的室内抑菌活性比较

采用生长速率法测定了不同浓度的百菌清及其三氟衍生物对番茄早疫病菌Alternaria solani(Ell,et Mart.)Jones es Gmut的室内杀菌毒力。试验结果表明，百菌清及其三氟衍生物的ED50值分别为6089．89mg／L和156．43mg/L。，前者是后者的38．93倍。百菌清三氟衍生物的毒力明显高于百菌清。     

钛合金叶片隔热烘漆的研制

以双酚A型环氧树脂为主要成膜物质,以氮化硼为功能填料,以丁醇醚化脲醛树脂为固化剂,并添加己二酸聚酯弹性体树脂改善其柔韧性、提高涂膜的机械性能,最终得到附着力强、耐热性好、隔热作用明显的飞机发动机叶片用防护涂料.     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

CENTUM-CS1000在离子膜制碱工艺中的应用

介绍了DCS在离子膜制碱工艺中的应用及常用控制方案的实现和运行效果。