The formal-CAFE methodology and model checking patterns in the specification of e-commerce systems

Electronic commerce is an important application that has evolved significantly recently. However, electronic commerce systems are complex and difficult to be correctly designed. Guaranteeing the correctness of an e-commerce system is not an easy task due to the great amount of scenarios where errors occur, many of them very subtle. In this work we presents a methodology that uses formal-method techniques, specifically symbolic model checking, to design electronic commerce applications and to automatically verify them. Also, a model checking pattern hierarchy has been developed—it specifies patterns to construct and verify the formal model of e-commerce systems. We consider this research the first step to the development of a framework, which will integrate the methodology, an e-commerce specification language based on business rules, and a model checker. Adriano Pereira received the B.S. and M.S. degrees in computer science in 2000 and 2002, respectively, and he is currently pursuing the Ph.D. degree in computer science from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His current interests are on performance analysis and modeling of e-business and distributed systems, and formal methods. Mark Song received the B.S., M.S. and Ph.D. degrees in computer science from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His current interests are on distributed systems and formal methods – especially BMC (Bounded Model Checking). Gustavo Franco received the B.S. and M.S. degrees in computer science in 2001 and 2004, respectively, from the Federal University of Minas Gerais, Belo Horizonte, Brazil. His research was on modeling the user behavior of e-business and distributed systems, and formal methods. Actually his current interests are on software engeneering and project management of IT projects.     

关于单位工程施工进度计划两种表示方式的研究

通过实例指出单位工程施工进度计划的两种表示形式在应用中出现的不同结果,并分析了其中的原因。     

Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.     

新生牛肝活性肽的制备及其毒性检测

目的制备新生牛肝活性肽并评价其安全性。方法采用膜法分离制备新生牛肝活性肽。将3批制品于37～40℃,75%相对湿度条件下存放3个月,以多肽含量为指标观察其稳定性,并进行急性毒性试验、小鼠骨髓细胞微核试验、Ames试验、小鼠精子畸形试验和大鼠喂养试验。结果制备的3批新生牛肝活性肽存放3个月后,多肽含量无明显下降,质量稳定。小鼠和大鼠经口灌人大于20.0g/kg体重的新生牛肝活性肽,均无急性毒性。3种致突变试验均未显示出致突变性,大鼠喂养试验各项指标均未见明显毒性。结论新生牛肝活性肽未表现出明显毒性。     

辐射制备缓释抗癌药阿糖胞苷的研究

报告了甲基丙烯酸酯类在室温下进行辐射聚合制备缓释抗癌药阿糖胞苷（Ａｒａ－Ｃ）的研究结果。结果表明，不仅亲水性单体，而且疏水性单体（包括ＭＭＡ、ＥＭＡ和ＢＭＡ等）都可用于辐射固化。加入到亲水性基质中的疏水性单体可以延缓药物的离体释放，其顺序是ＭＭＡ＜ＥＭＡ＜ＢＭＡ，央ＭＭＡ－ＨＥＭＡ共聚物中，Ａｒａ－Ｃ释放率随着基质中的ＭＭＡ含量增加而降低。药物的离体释放还受许多困素的控制，结果显示：药物释放量随着     

2～12GHz GaAs单片行波放大器

报道了一个全平面超宽带ＧａＡｓ单片行波放大器的研究结果。该单片电路的核心部件是四个３００μｍ栅宽的ＭＥＳＦＥＴ，整个电路拓扑结构简单，芯片面积为３．０ｍｍ×１．８ｍｍ。电路经优化设计后在２～１２ＧＨｚ范围内，小信号增益为５±１ｄＢ，输入输出电压驻波比≤１．７５。上述频率范围内输出功率≥１６ｄＢｍ，噪声系数≤８ｄＢ。采用全离子注入、全平面工艺，均匀性、一致性良好。实验结果与设计预计值十分一致。     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

小孔矩形腔体屏蔽特性的研究

本文提出了有孔腔体远、近场电磁屏蔽效能的计算方法，体研究了矩形腔体的屏蔽特性，讨论了各类孔对屏蔽能的影响程度。数值结果表明，理论计算与实验数据吻合较好。     

介质加载圆柱腔的场分析

本文应用严格场匹配法解决了介质加载圆柱腔的本征问题，计算了圆柱腔在纵向部分填充介质后ＴＥ０１ｎ模和ＴＭ０１ｎ模的本征频率和本征场型的变化。特别分析了本征模式在空气段为截止模的情况。本文的分析方法亦可应用到纵向部分填充介质的传输线和其它形状的谐振腔。