试谈计算机软件测试管理的应用

计算机的软件测试是软件工程构成部分之一,同时软件测试也是检验软件开发人员及软件产品是否合格的重要凭据。就软件测试管理系统活动及应用两个方面的内容进行研究,并对管理工具的存在进行简单的介绍。     

(α-MS)S-B-(α-MS)S三嵌段共聚物的合成及其结构与性能

以α-甲基苯乙烯(α-MS),苯乙烯(S)和丁二烯(B)为单体,采用两步聚合偶合法,先将α-MS,S,THF及n-BuLi于30℃下聚合1h,再加入环己烷和B,于50℃下聚合4h,最后加入偶合剂苯甲酸苯酯,反应2～3h,即得到(α-MS)S-B-(α-MS)S三嵌段热塑性弹性体。该共聚物经GPC,IR,UV,NMR,DSC等表征,(?)_n=(10～13)×10~4,(?)_w/(?)_n=1.1～1.3;当硬段/软段为30/70(质量比)时,软段中1,4-结构含量为70％～85％,形态具有相分离特征,随α-MS/S值的增加,硬段T_g可在90～160℃调节,其力学性能有一定的改善,并接近或超过SBS热塑性弹性体。     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

PHASE-SPACE DIFFUSION EQUATIONS FOR SINGLE BROWNIAN PARTICLE MOTION NEAR SURFACES

In numerous physical processes involving the motion of micron and submicron sized particles near surfaces, such as the filtration of hydrosols and aerosols, the particle motion is the net result of the combined effects of fluid convection, external forces, particle inertia, Brownian particle motion, and particle-surface fluid dynamic interactions. The most general method of describing particle motion under the combined action of these effects is through the so-called Fokker-Planck equation. In the absence of particle-surface fluid dynamic interactions, the Fokker-Planck equation is well-known, and it has been applied in a general way to problems involving the adsorption or deposition of Brownian particles onto surfaces through a solution technique known as the Brownian dynamics simulation method.

In this study, the Fokker-Planck equation for Brownian particle motion near surfaces is generalized to include particle-surface fluid dynamic interactions. The Fokker-Planck equation is shown to follow from the Liouville equation for the Brownian particle and n-fluid molecules present in the system, thus, establishing a firm theoretical foundation for the Fokker-Planck equation and the various other phase-space diffusion equations that follow from it.

Based on diagonalization of the Fokker-Planck equation, its short-time behavior is also derived here which enables a generalization of the Brownian dynamics method for the study of particle motion near surfaces including fluid dynamic interactions. Additionally, a perturbation solution of the Fokker-Planck equation under the conditions of small, but finite particle Stokes number is also derived. These solutions are shown to agree with previously given representations of the Smoluchowski or convective-diffusion equation for Brownian particle motion near surfaces, as well as with inertial corrections to the Smoluchowski equation available in the literature. This latter equation is also generalized here to include particle-surface fluid dynamic interactions.     

跨文化交际中中式英语词汇层面的表现

从跨文化交际角度,分析了中式英语在词汇层面上的三种表现形式:望文生义、词汇冗余和文化词汇误用.认为中式英语的形成与思维方式差异和文化差异直接相关.     

金纳米线拉伸行为的分子动力学模拟

采用分子动力学方法模拟了不同截面尺寸金纳米线的拉伸力学行为。计算结果表明:相同长度的金纳米线弹性模量随着截面尺寸的减小而减小,而其屈服强度随着截面尺寸的减小而增大,并且发生屈服推迟现象。应力—应变曲线与形变过程相对应。在弹性变形阶段,纳米线形变不显著;随着应变量的增加,发现纳米线出现大量堆垛层错。     

声频谱测井仪器的研制和野外实验

研制成功的声频谱测井仪器在井下发射和接收三种频率的声波信号,其中发射和接收20kHz声波信号的声系有一个发射和四个接收探头,源距为2．1～2．568m,间距为0．156m;发射和接收40kHz声波信号的声系由一个发射和两个接收探头组成,源距1．0—1．5m,间距0．5m;发射和接收10kHz声波信号的声系由一个发射和两个接收探头组成,源距为2．168—2．668m,间距0．5m．用三种不同的频率的声波进行测量记录目的是获得井壁径向深度不同处介质的声学信息,而且不同频率的声波信号在岩石中传播过程中频谱变化也是井壁岩层的可用声学信息．在井下的信息采集、数据传输、地面记录和监控全部由计算机控制．该仪器已经在大庆油田的三口井中成功的进行了野外实验．