A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO_4/graphite(LFP) and LiNiMnCoO_2/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.     

上海四平大楼爆破拆除中环境振动监测的分析

介绍上海四平大楼组合楼宇定向爆破拆除时对周边环境的振动监测,通过环境的振动监测准确地了解楼宇倾倒触地时监测控制点的振动速度值,从而有效地评估组合楼宇被爆破拆除时对相邻环境的影响状态.通过对集录的测试数据分析可以递推估算周边相邻建筑的影响状况,也可为以后类同爆破环境作前期的评判指导作用.应该肯定随着大体积建筑物爆破拆除工程的发展,对爆破中环境振动监测的要求将越来越强烈.     

珠江三角洲设计产业现状及前景预测

准确地说,“珠江三角洲”已不再是一个纯粹意义上的地理概念,在中国市场经济稳定发展的今天,它早已成为“活跃的民营经济”的代名词。在广东经济发展过程中,珠三角一直扮演着十分重要的角色,自上世纪80年代以来,其国内生产总值一直占广东省国内生产的70％以上。珠三角经济的迅速腾飞有以下一些特点：     

基于ADS的低频电子元器件建模技术研究

针对国产元器件模型库缺乏的问题,在ADS软件的基础上,对不同低频电子元器件的建模方法进行了详细的介绍,重点阐述了元器件几种建模方法和具体实施步骤,并介绍了新建模型的封装和验证。该建模方法也可用于其他软件平台上的元器件建模。     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

Thermal degradation behavior and gas phase flame‐retardant mechanism of polylactide/PCPP blends

The thermal degradation behavior of the blend based on polylactide (PLA) and poly(1,2‐propanediol 2‐carboxyethyl phenyl phosphinate) (PCPP) was investigated by the thermogravimetric analysis (TGA). Thermal degradation activation energies (E_a) of neat PLA and PLA/15% PCPP blend were calculated via the Flynn–Wall–Ozawa method. The E_a of the blends increased with the addition of PCPP increasing when the conversion was higher than 10%. In addition, the appropriate conversion models for the thermal degradation process of PLA and PLA/15% PCPP were studied via the Criado method. At the same time, the main gaseous decomposition products of PLA and its blend were identified by TGA/infrared spectrometry (TGA–FTIR) analysis. And it revealed that the PCPP improved the flame‐retardant property of PLA via altering the release of the flammable gas and nonflammable gas. Moreover, the PCPP improved the flame‐retardant property of PLA by inhibiting exothermic oxidation reactions in the combustion, which was further proved by pyrolysis–gas chromatography–mass spectrometry analysis. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40480.     

Perfluorosulfonated ionomers membranes: Melt‐processing and characterization for ion exchange applications

Perflurosulfonated ionomers membranes with different ionic‐exchange capacity were successfully fabricated via melt‐extruding and casting of their –SO₂F precursors. A systematical investigation of the thermal stability, crystallinity, and rheological properties of the precursors was performed to secure their optimized processing conditions. The tensile properties of acid‐form membranes are found to increase with base‐hydrolysis time, where a tensile strength of 38.2 MPa is readily obtained after 24 h's base‐hydrolysis. The content of –SO₂F or –SO₃H containing side‐chains plays an important role in the thermal stability, rheological, and mechanical properties of the precursor or the acid‐form membranes. The strong ionic interactions, attributed to the –SO₃H groups, lead to decreased crystallinity and tensile strength for different IEC membranes. The acid‐form membranes exhibit good proton conductivity and low methanol crossover in comparison with reference Nafion membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39944.     

Tuning of dielectric and ferroelectric properties in single phase BiFeO3 ceramics with controlled Fe/Fe ratio

Single phase multiferroic BiFeO₃ (BFO) ceramics were synthesized with controllable amount of Fe²⁺ and oxygen vacancies in a very wide concentration range. Double ferroelectric hysteresis loops are observed in fresh BFO ceramics at room temperature without any aging processes. Detailed study shows that this is due to the defect dipoles which have preferential orientations antiparallel to the direction of spontaneous polarization, providing a driving force for domain back-switching. The dielectric constant of BFO could be enormously enhanced by 100 times by increasing the Fe²⁺ content, employing a polaronic relaxation process.     

煤化工用水及废水处理分析

概述了煤化工高能耗、高污染、高耗水的产业特点,从工艺、意识、来源分析了造成产业特点的原因。为了减少煤化工废水中有毒害物质的含量,介绍了常用的废水处理方法,展望了煤化工用水及废水处理发展趋势。