Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Optimal deterministic timeouts for reliable scalable multicast

Reliable multicast protocols suffer from the problem of feedback implosion. To avoid this problem, the number of receivers sending feedback in case of loss must be small. However, losses experienced by different receivers are strongly correlated, since receivers share common resources in the multicast tree. One approach to feedback implosion avoidance relies on delaying feedback at the receivers. We present deterministic timeouts for reliable multicast (DTRM), a distributed algorithm to compute optimal deterministic timeouts for each receiver in a multicast tree as a function of the tree topology and the sender-to-receiver round-trip delays. DTRM has several desirable properties. First, feedback implosion is provably avoided for a single loss anywhere in the tree, provided delay jitter is bounded. Second, the computation of the timeouts can be entirely distributed; receivers and intermediate nodes only rely on local topology information. Third, the timeouts computed by DTRM are optimal with respect to the maximum response time     

Finite element beam propagation method for three-dimensionaloptical waveguide structures

A beam propagation method (BPM) based on the finite element method (FEM) is described for longitudinally varying three-dimensional (3-D) optical waveguides. In order to avoid nonphysical reflections from the computational window edges, the transparent boundary condition is introduced. The present algorithm using the Pade approximation is, to our knowledge, the first wide-angle finite element beam propagation method for 3-D waveguide structures. To show the validity and usefulness of this approach, numerical results are shown for Gaussian-beam excitation of a straight rib waveguide and guided-mode propagation in a Y-branching rib waveguide     

Positive temperature dependence of the electron impact ionizationcoefficient in In0.53Ga0.47As/InP HBTs

Impact ionization is a major limiting factor to the maximum operating voltage of InGaAs-based, high-speed transistors. In this work, data on the positive temperature dependence of the electron impact ionization coefficient α_n in In_0.53Ga_0.47As at medium-low electric fields are reported for the first time. The increase of α_n with temperature is opposite to the behavior normally observed in most semiconductors. This anomalous behavior implies the onset of a positive feedback between power dissipation and avalanche generation which may adversely affect the power handling capability of In_0.53Ga _0.47As-based devices, and which should be taken into account in device thermal modeling. In the experimental procedure, based on the measurement of the multiplication factor M-1 in npn In_0.53Ga _0.47As/InP Heterojunction Bipolar Transistors (HBT), particular care has been taken in order to rule out possible spurious, temperature-dependent contributions to the measured multiplication current     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Consequences of the 1979 Three Mile Island accident continued: further comment

The development of multimedia image review stations offers the cardiologist the ability to review multiple image sets in a single setting rather than moving from one review station to another. To accomplish this goal there are three essential barriers: 1) memory requirements for digital images; 2) standardization of data format; and 3) practical user interfaces. Image compression algorithms can be used to overcome the digital barrier; however, these must be used cautiously so as to not adversely affect image quality. The lack of standardization is being addressed by the implementation of the Digital Communication in Medicine (DICOM) standard, and practical user interfaces are being developed every day with the widespread implementation of World Wide Web technology. These solutions will allow the clinician to review all of a patient's image data in one location, such as in the office, on the nursing unit, or at home.     

Nasopharyngeal colonization in Costa Rican children during the first year of life

BACKGROUND: The establishment of the nasopharyngeal flora was followed in Costa Rican children from birth to 1 year of age. METHODS: Nasopharyngeal cultures were obtained at 1 (n = 413), 3 (n = 393), 6 (n = 376) and 12 months (n = 356) of age from children representative of the population in the Puriscal district. Weekly cultures were obtained from a subcohort of these children (n = 101). Mother-infant diads (n = 95) and preschool children (n = 208) attending day-care centers were also studied. RESULTS: The estimated proportion of colonized children in the population differed markedly depending on the frequency of culture. Quarterly cultures showed a slow increase in carrier rates from 3.9% for Haemophilus influenzae, 3.1% for Streptococcus pneumoniae and 6.5% for Moraxella catarrhalis at 1 month of age to 10.1% carrying H. influenzae and 19.4% carrying S. pneumoniae by the end of the first year. By quarterly culture the proportion of children colonized at least once was 36% for S. pneumoniae, 26% for H. influenzae and 28% for M. catarrhalis. In contrast weekly sampling showed that 95 to 100% of the children were colonized at least once during the first year of life with H. influenzae, S. pneumoniae or M. catarrhalis. Nasopharyngeal carriage of H. influenzae, S. pneumoniae and M. catarrhalis was low in the mothers, and very few mother-infant pairs carried identical bacteria at the same time. In contrast carrier rates were high in the siblings attending day care (H. influenzae 27.9%, S. pneumoniae 39.4%, both organisms 26.6%). Infants with siblings had significantly higher bacterial carriage at all ages than infants without siblings. CONCLUSIONS: Quarterly nasopharyngeal cultures showed that Costa Rican infants acquire their nasopharyngeal flora at a rate comparable with that for infants in developed countries and that siblings are an important source of the bacteria. Weekly samplings showed that virtually all children were colonized at least once during the first year of life.