约旦坦努尔RCC坝达到高标准

坦努尔坝是约旦的第一座RCC坝。该坝RCC铺筑采用斜层施工，提高工数50％。大坝上游面，下游台阶，阶梯式溢洪道，止水面以及RCC与坝肩石灰岩的交界面均采用GE－RCC。质量控制测试数据表明，该坝达到了国际大坝委员会会刊不久将发表的RCC坝质量标准的优良等级。     

Volatile Compounds of Raw Beef from 5 Local Spanish Cattle Breeds Stored Under Modified Atmosphere

Volatile compounds of raw beef from Asturiana de los Valles, Morucha, Parda Alpina, Pirenaica, and Retinta cattle breeds were studied. Steaks were packaged under 60% O₂, 30% CO₂, and 10% N₂, and 53 volatile compounds were tentatively identified by purge‐and‐trap extraction and gas chromatography with mass spectrometry after 0, 5, 10, and 15 d of chill storage. The degradation of beef quality with increasing storage time was evidenced by the increase in 2,3,3‐trimethylpentane, 2,2,5‐trimethylhexane, 3‐octene, 3‐methyl‐2‐heptene, 2‐octene, and 2‐propanone and by the decrease in dimethyl sulfide. Consequently, some of the volatile compounds, which are believed to be formed by thermal degradation of meat, might be formed during chill storage, and the rate of formation of some was dependent on the specific compound.     

Stability analysis of continuous-time periodic systems via theharmonic analysis

Asymptotic stability of finite-dimensional linear continuous-time periodic (FDLCP) systems is studied by harmonic analysis. It is first shown that stability can be examined with what we call the harmonic Lyapunov equation. Another necessary and sufficient stability criterion is developed via this generalized Lyapunov equation, which reduces the stability test into that of an approximate FDLCP model whose transition matrix can be determined explicitly. By extending the Gerschgorin theorem to linear operators on the linear space l₂, yet another disc-group criterion is derived, which is only sufficient. Stability of the lossy Mathieu equation is analyzed as a numerical example to illustrate the results     

A network management architecture for robust packet routing in meshoptical access networks

We describe an architecture for an optical local area network (LAN) or metropolitan area network (MAN) access. The architecture allows for bandwidth sharing within a wavelength and is robust to both link and node failures. The architecture can be utilized with an arbitrary, link-redundant mesh network (node-redundancy is necessary only to handle all node failures), and assumes neither the use of a star topology nor the ability to embed such a topology within the physical mesh. Reservation of, bandwidth is performed in a centralized fashion at a (replicated) head end node, simplifying the implementation of complex sharing policies relative to implementation on a distributed set of routers. Unlike a router, however, the head end does not take any action on individual packets and, in particular, does not buffer packets. The architecture thus avoids the difficulties of processing packets in the optical domain while allowing for packetized shared access of wavelengths. We describe the route construction scheme and prove its ability to recover from single link and single node failures, outline a flexible medium access protocol and discuss the implications for implementing specific policies, and propose a simple implementation of the recovery protocol in terms of state machines for per-link devices     

The Onsager relations analyzed using an ellipsoidal statistical equation

Validity on the well-known Onsager reciprocal relations L ₁₂=L ₂₁ is verified in the kinetic theory of gases taking into account mass and heat transfer near the surface. Using an analytical solution to the ellipsoidal statistical equation (providing for the true Prandtl number), it is demonstrated that the Onsager relations are obeyed, at least to within exponential corrections of the type exp(−1/Kn) in the Knudsen number.     

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line braodening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Indicators for inspection and maintenance planning of concrete structures

Based on an idea introduced by Benjamin and Cornell (1970. Probability, statistics and decision for civil engineers. New York: McGaw Hill) and previous works by the authors it is demonstrated how condition indicators may be formulated for the general purpose of quality control and for assessment and inspection planning in particular. The formulation facilitates quality control based on sampling of indirect information about the condition of the considered components. This allows for a Bayesian formulation of the indicators whereby the experience and expertise of the inspection personnel may be fully utilized and consistently updated as frequentistic information is collected. The approach is illustrated on an example considering a concrete structure subject to corrosion. It is shown how half-cell potential measurements may be utilized to update the probability of excessive repair after 50 years. Furthermore in the same example it is shown how the concept of condition indicators might be applied to develop a cost optimal maintenance strategy composed of preventive and corrective repair measures.     

Fermentative hydrogen production in a system using anaerobic digester sludge without heat treatment as a biomass source.

Hydrogen produced from anaerobic fermentation of organic matter is a sustainable energy source. Anaerobic hydrogen-producing systems have been typically seeded with heat-treated inocula to eliminate hydrogen-consuming methanogens. This can be both energy- and economically-intensive. In this work, operational parameters were modified to determine if operating a reactor at low pH (5.5) and low SRT (10 hours) would result in a hydrogen-producing system free of methanogens using anaerobic digester sludge with no heat treatment as an inoculum. Initially, the reactor exhibited a hydrogen productivity of approximately 7.9% when fed glucose. After purging was begun with 10% CO2/90% N2, the hydrogen productivity increased to > 20% for the first day. Hydrogenotrophic methanogens then established themselves in the reactor, reducing the hydrogen productivity in the second non-purged phase by 80%. The operational controls examined were not sufficient to eliminate hydrogen-consuming methanogens for longer than approximately one week, and thus further methods must be developed.     

Influence of Edible Films upon the Moisture Loss and Microstructure of Dietetic Sucrose-Free Sponge Cakes during Storage

The kinetics of changes in the bound water content in dietetic sucrose-free sponge cakes (DC) during storage was investigated. The effect of edible films of polymyxan, pectin, xanthan, and carboxymethylcellulose upon this kinetics was also investigated. The quantitative changes in both states of water (slightly bound water and strongly bound water) were registered by combined dynamic analysis (thermogravimetry analysis, TGA, and differential thermal analysis, DTA). The moisture changes in DC crumb were analyzed by drying out to constant mass. The rate constants were determined according the equation q = q_oe^-kt. The values of rate constants 'k', in day^-1, concerning the different edible films were as follows: for crumb moisture is (8.00 ≤ k ≤ 12.47) × 10^-3, for bound water is (3.07 ≤ k_w ≤ 6.26) × 10^-2, for slightly bound water is (4.22 ≤ k₁ ≤ 8.49) × 10^-2 and for strongly bound water is (2.02 ≤ k₂ ≤ 5.62) × 10^-2 as compared to 18.53 × 10^-3, 7.16 × 10^-2, 9.04 × 10^-2, and 5.36 × 10^-2 in the uncovered DC, respectively. The best water-retaining effect in respect to crumb moisture during storage was ascertained in the use of polymyxan and xanthan films. The lowest rate constant values for bound water and its two states were measured for DC covered with pectin. The relation between the kinetics of both bound water states during storage and ageing of the crumb of DC covered with different edible films and the crumb microstructure was represented. By means of scanning electron microscope was read the smallest change in crumb microstructure of pectin-covered DC on the sixth day of storage.