Noninterfering optical method of HBT circuit evaluation

The authors report a novel noninterfering and simple approach for evaluation of circuits implemented with AlGaAs/GaAs heterojunction bipolar transistors (HBTs). This method makes use of radiative recombination in the base region of current-carrying HBTs. The infrared radiation emitted is 'visible' to the closed-circuit TV (CCTV) cameras. Therefore, one can view the operation of the HBT circuit under test at normal biases with a TV monitor. This method can be used to determine logic states of gates, as well as collector current of individual HBTs within integrated circuits.<>     

Mixing power in the preparation of powdered composites

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 5, pp. 6–7, May, 1989.     

100 kW DC biased, all semiconductor switch using Si P-I-N diodesand AlGaAs 2-D laser arrays

A two-dimensional laser array, delivering a peak power of 1 kW with an overall efficiency of 33%, was used to activate silicon p-i-n diodes. A single device, activated by a 1 kW laser, produced a holding voltage of 1000 V and conducted 56 A. When two similar p-i-n diodes were connected in parallel and activated by two 1 kW AlGaAs laser arrays, a holding voltage of 1000 V and conduction of 100 A were obtained     

Isolation and Partial Characterization of Phytic Acid-Rich Particles from Great Northern Beans (Phaseolus vulgaris L.)

Phytic acid-rich particles were isolated from a combined density fraction (CDF) of Great Northern beans. CDF contained more than 80% of the total phytic acid, and 70% of the total crude protein and substantial amounts of certain minerals. CDF had phytic acid in both water soluble and water insoluble forms. An isolate containing phytic acid-rich particles was prepared from CDF using a Tris-base solution. The phytic acid-rich isolate contained 26.6% phytic acid, 34.3% protein, 30.0% total carbohydrates, 0.6% calcium, 2.1% magnesium, and 0.3% potassium. Chemical analysis and fractionation of CDF indicated that the water insoluble form of phytic acid in Great Northern beans was present as a salt of calcium-magnesium-potassium in association with proteins.     

A typical meteorological day (TMD) approach for predicting the long-term performance of solar energy systems

A method for predicting the long-term performance of solar energy systems, based on the analysis of system performance for one particular day—the typical meteorological day (TMD)—is presented. The TMD is constructed from the cumulative time distribution of insolation values on the collector aperture. The TMD method requires little calculational effort and a small data base relative to standard yearly computer simulations. Good agreement is found between the predictions of the new method and the corresponding results of the -f-chart method. The TMD method is of particular value for cases that may often be treated inaccurately by simple calculational methods: (1) high threshold problems; (2) systems with short response times (e.g., due to small storage); and (3) systems in which collectors other than flat plates are used (the method is applicable to all solar collector types).     

Concurrent Cholesky factorization of positive definite banded Hermitian-matrices

First the Cholesky factorization is extended to cover uniformly partitioned banded positive definite matrices of rank n which may be real symmetric or Hermitian. Then two stratagems are given for the use of the algorithm in concurrent machines where the number of processing elements is less than required to factor the matrix in as few serial steps as possible, and where uniformly high efficiency is expected from all processing elements. Expressions are given for the efficiency factor e appearing in the speed-up expression g = eN, and these are specialized for the N node hypercube machine as a function of partition size s, the number N of processing elements of the hypercube machine, and the cost μ of interelement transmission relative to computation. It is shown that efficiency factor e is inversely proportional to μ/s, and that e is almost independent of N when N is large and μ/s = 0. The task is completed in n/s serial steps with no limit on n. The half bandwidth b of the matrix is 2Ns.     

Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

Estrogenic personal care products in a greywater reuse system.

The occurrence and fate of parabens in a greywater system was assessed. The potential for removal of residual paraben concentrations in effluent greywater with chlorine dioxide was also investigated. The influent to the greywater plant was characterised by considerable variation, with concentrations from below the detection limit to 40 microg/L and the five commonly used parabens in consumer products were frequently detected. After the biological treatment only two paraben were detected with concentration from 65-120 ng/L. Chlorine dioxide treatment of the biologically treated effluent with dosages down to 0.75 mg/L resulted in more than 97% reduction of all parabens. Formation of the by-product chloroform was insignificant from the chlorine dioxide treatment.     

Assessing the performance of intumescent coatings using bench‐scaled cone calorimeter and finite difference simulations

A method was developed to assess the heat insulation performance of intumescent coatings. The method consists of temperature measurements using the bench‐scaled experimental set‐up of a cone calorimeter and finite difference simulation to calculate the effective thermal conductivity dependent on time/temperature. This simulation procedure was also adapted to the small scale test furnace, in which the standard time–temperature curve is applied to a larger sample and thus which provides results relevant for approval. Investigations on temperature and calculated effective thermal conduction were performed on intumescent coatings in both experimental set‐ups using various coating thicknesses. The results correspond to each other as well as showing the limits of transferability between both fire tests. It is shown that bench‐scaled cone calorimeter tests are a valuable tool for assessing and predicting the performance of intumescent coatings in larger tests relevant for approval. The correlation fails for processes at surface temperatures above 750°C, which are not reached in the cone calorimeter, but are attained in the small scale furnace set‐up. Copyright © 2006 John Wiley & Sons, Ltd.