Capacitance distribution of Ni-Nb-Zr-H glassy alloys

Capacitance distribution of {(Ni(0.6)Nb(0.4)(1-x)Zrx}(100-y)-Hy (x = 0.30, 0.35, 0.40, 0.45 and 0.50, 0 < or = y < or = 20) glassy alloy ribbons was carried out by ac impedance analysis at frequency of 1 kHz, in terms of a distributed constant equivalent circuit. The capacitance can be represented by oblique contour lines. The highest capacitance (1-11 microF) could be found near the point when x = 0.40, y = 10, which is a composition occurring room-temperature Coulomb oscillation, while capacitance of the composition (x = 0.35, y = 4) occurring ballistic transport was around 0.8 microF. The capacitance difference would be explained by an effect of hydrogen localization derived from morphology of distorted Zr-centered icosahedral Zr5Ni5Nb3 clusters and ideal Ni-centered clusters. The electrocapillarity equation showed that the specific capacitance between two electrodes increases parabolic with decreasing the distance, as a polarized glutinous liquid.     

Enhancing the Humidity Sensitivity of Ga2O3/SnO2 Core/Shell Microribbon by Applying Mechanical Strain and Its Application as a Flexible Strain Sensor

The humidity sensitivity of a single β‐Ga₂O₃/amorphous SnO₂ core/shell microribbon on a flexible substrate is enhanced by the application of tensile strain and increases linearly with the strain. The strain‐induced enhancement originates from the increase in the effective surface area where water molecules are adsorbed. This strain dependence of humidity sensitivity can be used to monitor the external strain. The strain sensing of the microribbon device under various amounts of mechanical loading shows excellent reliability and reproducibility with a gauge factor of ?41. The flexible device has high potential to detect both humidity and strain at room temperature. These findings and the mechanism involved are expected to pave the way for new flexible strain and multifunctional sensors.     

Determination of fracture toughness of human permanent and primary enamel using an indentation microfracture method

The purpose of the present study was to examine the fracture toughness and Vickers microhardness number of permanent and primary human enamel using the indentation microfracture method. Crack resistance and a parameter indirectly related to fracture toughness were measured in 48 enamel specimens from 16 permanent teeth and 12 enamel specimens obtained from six primary teeth. The Vickers microhardness number of the middle portion was greater than the upper portion in primary enamel. The fracture toughness was highest in the middle portion of permanent enamel, because fracture toughness greatly depends upon microstructure. These findings suggest that primary teeth are not miniature permanent teeth but have specific and characteristic mechanical properties.     

Si thin platelets as high-capacity negative electrode for Li-ion batteries

Pure Si platelets and Ni or Cu layer-laminated Si platelets with difference thickness were prepared, and their charge/discharge properties were examined in 1 M LiClO₄/EC + DEC (1:1 by volume) as alternative negative electrode materials to graphite for Li-ion batteries. The shape of thin platelets and lamination with Ni layer are significantly effective to improve the cycleability in Li-Si alloy system by relieving the stress during the alloying/de-alloying processes, reinforcing the mechanical strength and reducing the Li⁺ ion diffusion length. Moreover, the first irreversible capacity is minimized by reduction of the amount of Ketjen Black (KB) in the composite electrode because of electrolyte decomposition on the surface of KB. Consequently, the Si/Ni/Si-LP30 (30/30/30 nm) composite electrode with 5 wt% KB also exhibits over 700 mAh g⁻¹ even after 50 cycles in 1 M LiPF₆/EC + DEC (1:1).     

Carbon-supported growth of cross-linked platinum nanowires by surfactant templating and their elecrochemical characterization

Platinum/carbon (Pt/C) composite materials were prepared by the hydrazine reduction of H2PtCl6 confined to a mixed surfactant lytropic liquid crystal (LC)/C mixture with varying amounts of water. The reaction at relatively low water contents successfully yielded cross-linked Pt nanowires with wire-widths of 2-5 nm. The novel Pt nanostructure is believed to be from poorly hydrated hexagonal domains formed together with layered domains by the phase separation of the precursory LC mixture in the presence of carbon. Electrochemical measurements using cyclic volutammetry and membrane electrode assemblies revealed that the cross-linked nanowired Pt/C composite exhibits fairly high electrocatalytic activity for oxygen reduction reaction, as well as a high performance as the cathode material for polymer electrolyte fuel cells.     

Effect of the radio-frequency power on the dielectric properties of hydrogen-containing boron carbon nitride films deposited by plasma-assisted chemical vapor deposition using tris(dimethylamino)boron gas

We investigated the properties of boron carbon nitride film containing hydrogen (BCNH film) deposited using tris(dimethylamino)boron as the source gas. The dielectric constant (k) of BCNH film decreases with decreasing radio-frequency plasma power used for deposition, and can be as low as 1.8 at 10 W. Thermal desorption spectroscopy analysis shows that the film contains a large amount of hydrogen. Fourier transform infrared spectroscopy shows an absorption band at 2960 cm−1, attributed to the asymmetrical stretching mode of C-H in the methyl group. It is thought that increasing the number of C-H bonds, which have a low polarizability, can achieve a lower k value.     

Connection of Vortices Between Spatially Different Phases in Two-Component Bose-Einstein Condensates

We study interfacial topological defects called boojums, a vortex ending or a connecting point of two kinds of vortex cores, in rotating two-component Bose-Einstein condensates. First, we show that the boojum exists at a vortex ending that connects to the interface of the strongly phase-separated condensates. Next, we study various boojums appearing between two phases characterized by different vortex structures, where the intercomponent s-wave scattering lengths are spatially varied. Using three-dimensional simulations of the Gross-Pitaevskii equations, we reveal the detailed structure of the boojums by visualizing its density distribution and effective superflow vorticity.     

Magnetic field measurement of large aperture FFAG magnet for muon-phase-rotation ring

The PRISM-FFAG ring, which consists of 10 scaling-radial-sector magnets, has been designed to store muons with large emittance and momentum spread. The FFAG magnets differ from conventional dipole magnets in that they have a magnetic field that varies strongly with radius and the vertical direction of the magnetic field alternates. Each magnet is composed of three sets of coils to produce a defocussing (outward bending)-focussing-defocussing triplet. After careful design, the PRISM-FFAG magnets were constructed and magnetic field measurements were made. The field maps in the fiducial volume show satisfactory agreement with the design fields based on OPERA 3D/TOSCA calculations.     

Relationship between office workers’ staying and workstation attributes in a non-territorial office using ultra wide band sensor network

This paper investigates the staying and moving characteristics of office workers in a non-territorial office using an ultra wide band (UWB) impulse radio sensor network. The differences between office workers’ staying and moving are clarified according to the individual workstation type that they select. The study determines the characteristics of each type of workstation. By clarifying office workers’ preference for staying and moving with regard to individual workstation types and office worker post, the reasons why office workers in different posts tended to select different types of workstations were revealed. Specifically, leaders tended to select workstations at the “inner meeting corner side” most frequently, as they had a greater need to stay in other areas. In contrast, ordinary staff needed to visit office workers in other areas less often, and as such, they tended to select individual workstations at the “middle meeting corner side.” Barring this, they tended to select individual workstations at the “middle corridor side” or “outer-meeting corner side.” Temporary staff members had little need to visit or stay at other places so they tended to select individual workstations at the “window side,” which is seldom visited or stayed at by other office workers and they could be disturbed less often from their solo work.