Modeling of ion transport reactor for oxy‐fuel combustion

This paper aims at investigating the performance of a cylindrical ion transport reactor designed for oxy‐fuel combustion. The cylindrical reactor walls are made of dense, nonporous, mixed‐conducting ceramic membranes that only allow oxygen permeation from the outside air into the combustion chamber. The sweep gas (CO₂ and CH₄) enters the reactor from one side and mixes with the oxygen permeate, and the products are discharged from the other side. The process of oxygen permeation through the reactor walls is influenced by the flow condition and composition of air at the feed side (inlet air side) and the gas mixture at the permeate side (sweep gas side). The modeling of the flow process is based on the numerical solution of the conservation equations of mass, momentum, energy, and species in the axisymmetric flow domain. The membrane is modeled as a selective layer in which the oxygen permeation depends on the prevailing temperatures as well as the oxygen partial pressure at both sides of the membrane. The CFD calculations were carried out using fluent 12.1 (ANSYS, Inc., Canonsburg, PA, USA), whereas the mass transfer of oxygen through the membrane is modeled by a set of user defined functions. The model results were validated against previous experimental data, and the comparison showed a good agreement. The study focused on the effect of oxygen partial pressure and temperature on the resulting combustion zones inside the reactor for the two cases of co‐current and counter‐current flow regimes. The results indicated that the oxygen to fuel mass ratio increases as the percentage of CO₂ increases in the inflow sweep gas for both co‐current and counter‐current flows. The obtained sweep mixture ratio (CO₂/CH₄) of 24 is found within the stoichiometric limit over most of the reactor length in the co‐current configuration, whereas the sweep mixture ratio of 15.67 is found in the counter‐current configuration owing to the high O₂ permeation. Copyright © 2012 John Wiley & Sons, Ltd.     

Dynamic security constrained optimal power flow/VAr planning

Traditionally security constrained optimal power flow and VAr planning methods consider static security observing voltage profile and flow constraints under normal and post contingency conditions. Ideally, these formulations should be extended to consider dynamic security. This paper reports on a BC Hydro/CEPEL joint effort establishing a dynamic security constrained OPF/VAr planning tool which considers simultaneously static constraints as well as voltage stability constraints. This paper covers the details of formulation and implementation of the tool together with the test results on a large scale North American utility system and a reduced Brazilian system     

Influence of the carboxymethyl chitosan anti-adhesion solution on the TGF-β1 in a postoperative peritoneal adhesion rat

The aim of this paper was to investigate the effect of carboxymethyl chitosan anti-adhesion solution on prevention of postsurgical adhesion. Forty adult male Wistar rats were randomly divided into three groups: 0.9 % normal saline solution (group A), hyaluronic acid gels (group B) and carboxymethyl chitosan anti-adhesion solution (group C). The animals were treated with normal saline, hyaluronic acid gels or carboxymethyl chitosan anti-adhesion solution at the time of surgery. After 2 or 3 weeks, the degree of adhesions and histological effects were determined. The adhesions in groups B and C were significantly decreased, and the levels of TGF-β₁ and hydroxyproline in group C were significantly lower than that in group A (P < 0.05). The histopathology in group C showed fewer inflammatory cells and fibroblasts. Carboxymethyl chitosan anti-adhesion solution can effectively prevent postoperative adhesion which is a promising drug delivery system in the context of postsurgical anti-adhesion.     

Stick-slip conditions in the general motion of a planar rigid body

In this paper we study combined translational and rotational (general) motion of planar rigid bodies in the presence of dry coulomb friction contact. Despite the cases where the body has pure translational/ rotational motion or can be assumed as a point mass, during the general motion, distinct points of the rigid body move in different directions which cause the friction force vector at each point to be different. Therefore, the direction and the magnitude of the overall friction force cannot be intuitively defined. Here the concept of instantaneous center of rotation is used as an effective method to determine the resultant friction force and moment. The main contribution of this paper is to propose novel stick-slip switching conditions for the general in-plane motion of rigid bodies. Simulation results for some combination of external forces are provided and some experimental tests are designed and conducted for practical verification of the proposed stick-slip conditions.     

Traveling wave behavior in a two-phase flow model of tumor growth

Tumor growth which undergoes complex bio-mechanical processes has been a significant focus for mathematical modeling, with particular interest in its dynamic behavior. In this paper, we consider a two-phase flow model for describing the dynamics of tumor growth. The model accounts for aggregate cell movement and mechanical interactions between tumor cells as well as cell proliferation. In suitable limits, by using the dynamical systems theory approach, tumor growth in this mechanical model is shown to occur in the form of traveling waves that can propagate either forward or backward, depending on the values of the parameters. Our results, in particular, the wave profiles of tumor cell density are more realistic and explain those obtained in a recently developed simple, experiment-based, model for studying non-spatial dynamics of tumor cells.     

Long Term Performance of Hydrogeochemical Riverine Mine Tailings Deposition at Freeport Indonesia

Steep terrain, intense rainfall, and seismic activity precluded use of conventional tailings storage facilities at the PT Freeport Indonesia (PTFI) copper–gold mine, in Papua, Indonesia. A controlled river tailings system was adopted as the only feasible way to manage the tailings. The tailings are transported to an engineered 230 km² deposition area, which is bounded by levees on the east and west sides and is open on the south side to allow transport water and surges of rainfall to exit the area. We evaluated the performance of the ore-fed blending strategy for managing potential acid rock drainage formation of the tailings. Long-term leaching column tests and monitoring of deposited tailings provided insight on the reactivity, leaching behaviours, and neutralizing potential of the samples, and the ratio of acid neutralizing capacity (ANC): maximum potential acidity (MPA) that would ensure that the deposited tailings remain non-acid forming. We concluded that an ANC/MPA ratio >1.5 provides an adequate factor of safety to prevent acid generation and ensure long-term geochemical stability of the deposited tailings.     

A Modified Particle Swarm Optimizer for the Coordination of Directional Overcurrent Relays

The coordination of directional overcurrent relays (DOCR) is treated in this paper using particle swarm optimization (PSO), a recently proposed optimizer that utilizes the swarm behavior in searching for an optimum. PSO gained a lot of interest for its simplicity, robustness, and easy implementation. The problem of setting DOCR is a highly constrained optimization problem that has been stated and solved as a linear programming (LP) problem. To deal with such constraints a modification to the standard PSO algorithm is introduced. Three case studies are presented, and the results are compared to those of LP technique to demonstrate the effectiveness of the proposed methodology.     

AN EXPERIMENTAL INVESTIGATION OF YIELD STRESS OF WESTERN CANADIAN COAL WATER FUELS

The concept of a yield value is important to many areas of slurry coal water fuel transport such as in predicting its stability or estimating the pressure requirements for pipe-line start-up and turbulent flow. This paper describes techniques to accurately measure coal water fuel yield point. In order to display a wide variation in coal water fuel properties, slurries made from two Western Canadian coals were made available to CRL for yield point study. The proprietory Salzgiter Industrial AG technology (DENSECOAL) was used for a low volatile or bituminous coal (A) and the CARBOGEL process for a medium volatile bituminous (B).     

An approximate analytical solution for the nonlinear inverse axial dispersion model

An analytical solution for diffusion with homogenous n the order nonlinear chemical reaction in laminar flow of a Newtonian fluid through tubular reactor with unknown boundary conditions is presented. The results of the new solution have been compared with previously published numerical solutions and shown to be accurate.