Standardization of Technological Parameters for Drawing Optical Rods Using Experimental Models

A method for constructing experimental models of drawing optical rods based on experimental data is considered. The models obtained make it possible to identify admissible technological parameter fluctuations in the range selected.     

Nanoscale Crystallization in the Amorphous Alloy Fe79P14.2Si4.4Mn2.2V0.2 upon Pulsed Photon Annealing

The effect of pulsed photon annealing with energy densities from 1.4 to 42 J/cm² for various lengths of time on the structure of the amorphous alloy Fe₇₉P_14.2Si_4.4Mn_2.2V_0.2 was studied by x-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The results demonstrate that short-term irradiation with low energy densities leads to surface relaxation of the amorphous alloy, increases the strength of the surface layer, and reduces the internal-friction peak. Longer term photon annealing leads to crystallization of the alloy throughout the sample thickness.     

An efficient TDMA start-up and restart synchronization approach for distributed embedded systems

A desired attribute in safety-critical embedded real-time systems is a system time and event synchronization capability on which predictable communication can be established. Focusing on bus-based communication protocols, we present a novel, efficient, and low-cost start-up and restart synchronization approach for TDMA environments. This approach utilizes information about a node's message length that forms a unique sequence to achieve synchronization such that communication overhead can be avoided. We present a fault-tolerant initial synchronization protocol with a bounded start-up time. The protocol avoids start-up collisions by deterministically postponing retries after a collision. We also present a resynchronization strategy that incorporates recovering nodes into synchronization.     

Entropy Based Approach to Data Loss Reparation Through the Indeterminate Fine-Grained Parallel Computation

The new method of a gap recovery in symbol sequences is presented. A covering is combined from the suitable reasonably short strings of the parts of a sequence available for observation. Two criteria are introduced to choose the best covering. It must yield the maximum of entropy of a frequency dictionary developed over the sequence obtained due to the recovery, if an overlapping combined from the copies of strings from the available parts of the sequence exists. The second criterion identifies the best covering in case when one has to use any string to cover the gap; here the best covering must yield the minimum of specific entropy of the frequency dictionary developed over the available parts of the sequence against the one developed over the entire sequence obtained due to the recovery. Kirdin kinetic machine which is the ideal fine-grained structureless computer has been used to resolve the problem of the reconstruction of a gap in symbol sequence.     

Ionizing-Radiation Response of the GaAs/(Al, Ga)As PHEMT: A Comparison of Gamma- and X-ray Results

An experiment is reported on the effect of ⁶⁰Co gamma rays or 45-keV x-ray photons on the GaAs/(Al, Ga)As PHEMT. It is shown that x-ray treatment can improve the dc performance of the device in some cases. This finding is attributed in part to the annealing or modification of DX centers.     

Effect of proton radiation on the kinetics of phosphorescence decay in the ceramic material ZnS-Cu

The results of studying the dose dependences of the decay kinetics of phosphorescence excited by X-ray radiation in luminescent ZnS-Cu ceramic material before and after irradiation with 50-MeV protons are considered. An anomalous variation in the exponent of the hyperbolic phosphorescence curves was observed experimentally as the accumulated light sum increased. It is found from an analysis of the data obtained that two processes are involved in the decay: one of these is monomolecular and corresponds to the first-order kinetics; the other is bimolecular and corresponds to the second-order kinetics. Transitions of charge carriers delocalized from traps occur at the nonradiative-recombination centers induced by proton radiation. Recombination of these charge carriers at the emission centers in the course of decay is described by the second-order kinetics.     

Thermodynamics of Chemical Interactions in the CdTe–ZnTe–O2–C System during Melt Growth of Cd1 – x Zn x Te Crystals

Thermodynamic analysis is used to identify the possible chemical reactions of CdTe and ZnTe with the container material and gaseous atmosphere during Bridgman growth. Thermodynamic parameters of carbide and oxycarbide formation in the growth system are evaluated. The calculation results are consistent with the well-known fact that oxygen-containing impurities can be removed from the growth charge by calcination in hydrogen. Moreover, as shown in experiment, the removal of oxygen from the charge ensures a substantial decrease in the carbon content of the crystals.