Body Odors of Parasitized Caterpillars Give Away the Presence of Parasitoid Larvae to Their Primary Hyperparasitoid Enemies

Foraging success of parasitoids depends on the utilization of reliable information on the presence of their often, inconspicuous hosts. These parasitic wasps use herbivore-induced plant volatiles (HIPVs) that provide reliable cues on host presence. However, host searching of hyperparasitoids, a group of parasitoids that parasitize the larvae and pupae of other parasitoids, is more constrained. Their hosts do not feed on plants, and often are even concealed inside the body of the herbivore host. Hyperparasitoids recently have been found to use HIPVs of plants damaged by herbivore hosts in which the parasitoid larvae develop. However, hyperparasitoids that search for these parasitoid larvae may be confronted with healthy and parasitized caterpillars on the same plant, further complicating their host location. In this study, we addressed whether the primary hyperparasitoid Baryscapus galactopus uses caterpillar body odors to discriminate between unparasitized herbivores and herbivores carrying larvae of parasitoid hosts. We show that the hyperparasitoids made faster first contact and spent a longer mounting time with parasitized caterpillars. Moreover, although the three parasitoid hosts conferred different fitness values for the development of B. galactopus, the hyperparasitoids showed similar behavioral responses to caterpillar hosts carrying different primary parasitoid hosts. In addition, a two-chamber olfactometer assay revealed that volatiles emitted by parasitized caterpillars were more attractive to the hyperparasitoids than those emitted by unparasitized caterpillars. Analysis of volatiles revealed that body odors of parasitized caterpillars differ from unparasitized caterpillars, allowing the hyperparasitoids to detect their parasitoid host.     

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a monolithic interconnection of CIS (Cu(In,Ga)(S,Se)₂) thin film solar cells by picosecond laser pulses at a wavelength of 1064 nm. We show results for single pulse ablation threshold values and line scribing of molybdenum films on glass (P1), CIS on molybdenum (P2) and zinc oxide on CIS (P3). The purposes of these processes are the p‐type isolation (P1), cell interconnect (P2) and n‐type isolation (P3), which are required for complete cell architecture. The half micron thick molybdenum back electrode can be structured with a process speed of more than 15 m/s at about 15 W average power without detectable residues and damage by direct induced laser ablation from the back side (P1). The CIS layer can be structured selectively down to the molybdenum at process speeds up to 1 m/s at about 15 W average power, due to the precision of direct laser ablation in the ultrashort pulse regime (P2). The ZnO front electrode layer is separated by clean trenches with straight side walls at process speeds of up to 15 m/s at about 10 W average power, as a result of indirect induced laser ablation (P3). A validation of functionality of all processes is demonstrated on CIS solar cell modules (30 × 30 cm²). By replacing one state‐of‐the‐art process by a picosecond laser process at a time, solar efficiencies could be increased for P1 and P2 and stayed on a similar level for P3. After an optimization of the patterning processes in the R&D pilot line of AVANCIS, we achieved a new record efficiency for an all‐laser‐patterned CIS solar module: 14.7% as best value for the aperture area efficiency of a 30 × 30 cm² sized CIS module was reached. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of GPVI- or GPVI-CD39-Coated Nanoparticles and Their Impact on In Vitro Thrombus Formation

Traditional antithrombotic agents commonly share a therapy-limiting side effect, as they increase the overall systemic bleeding risk. A novel approach for targeted antithrombotic therapy is nanoparticles. In other therapeutic fields, nanoparticles have enabled site-specific delivery with low levels of toxicity and side effects. Here, we paired nanotechnology with an established dimeric glycoprotein VI-Fc (GPVI-Fc) and a GPVI-CD39 fusion protein, thereby combining site-specific delivery and new antithrombotic drugs. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles, NP-BSA, NP-GPVI and NP-GPVI-CD39 were characterized through electron microscopy, atomic force measurements and flow cytometry. Light transmission aggregometry enabled analysis of platelet aggregation. Thrombus formation was observed through flow chamber experiments. NP-GPVI and NP-GPVI-CD39 displayed a characteristic surface coating pattern. Fluorescence properties were identical amongst all samples. NP-GPVI and NP-GPVI-CD39 significantly impaired platelet aggregation. Thrombus formation was significantly impaired by NP-GPVI and was particularly impaired by NP-GPVI-CD39. The receptor-coated nanoparticles NP-GPVI and the bifunctional molecule NP-GPVI-CD39 demonstrated significant inhibition of in vitro thrombus formation. Consequently, the nanoparticle-mediated antithrombotic effect of GPVI-Fc, as well as GPVI-CD39, and an additive impact of CD39 was confirmed. In conclusion, NP-GPVI and NP-GPVI-CD39 may serve as a promising foundation for a novel therapeutic approach regarding targeted antithrombotic therapy.     

Aging Behavior of Propellants investigated by heat generation,stabilizer consumption,and molar mass degradation

Four double-base rocket propellants and a single-base gun propellant were tested to find out stabilizer consumption molar mass degradation, and heat generation between 50 °C and 90 °C and between 40 °C and 110 °C, respectively. Stabilizer depletion was measured by high performance liquid chromatography (HPLC), molar mass degradation by gel permeation chromatography (GPC), and heat generation by microcalorimetry. The conditioning times at different temperatures were determined with one of the rocket propellants, and the influence of the long-term storage on heat generation at 60 °C for 2191 dys was investigated. A correlated experiment between stabilizer consumption and heat generation showed that heat production does not increase substantially until the stabilizer has been consumed almost completely. The experimental data of molar mass degradation are described by a kinetic model based on statistical chain scission, and the stabilizer decrease by a first order reaction. For the gun propellant the Arrhenius plots of the reaction rate constants show two temperatures of teh stabilizer consumption, molar mass degradation and heat generation were determined.     

Optimization of alcohol‐free beer production by lager and cachaça yeast strains using response surface methodology

Alcohol‐free beers (AFBs) are an attractive segment of the beer market both for the brewing industry and for consumers. While AFBs produced by arrested/limited fermentation often suffer from a lack of volatile compounds, beer flavour can be improved by yeast selection and optimization of fermentation conditions. The yeast selection strategy was demonstrated by comparing traditional lager yeast with selected cachaça yeast strains. Correspondingly, response surface methodology was used to enhance the formation of the flavour‐active volatile compounds by optimization of the fermentation conditions (original wort extract, fermentation temperature, pitching rate). Statistical analysis of the experimental data revealed the relative significance of process variables and their interactions. The developed quadratic model describing the responses of total esters and higher alcohols to changes in process variables was used to predict the ideal fermentation conditions in terms of flavour formation. The predicted conditions were experimentally verified and alternative strategies of AFB production are suggested. Copyright © 2016 The Institute of Brewing & Distilling     

Impact of the roasting degree of coffee on the in vitro radical scavenging capacity and content of acrylamide

Due to the recognized toxicity of acrylamide, intensive efforts have been made to reduce the concentration of this undesired Maillard by-product in food. This work reports the results obtained from a series of experiments aimed at determining the concentration of acrylamide and the in vitro radical scavenging capacity in the same roasted and ground coffee samples, as it is well established that a significant part of the antioxidant activity in coffee is linked to the melanoidins, which are also considered as Maillard reaction products (MRPs). The radical scavenging capacity was measured using electroparamagnetic resonance (EPR). Coffee samples from the Robusta and Arabica varieties were roasted at 236 °C over different time periods to obtain very light, light, medium and dark roast. Color analyses were performed on all samples. Increasing the roasting degree led to a decrease in acrylamide concentration as well as radical scavenging capacity. The results of this work indicate that any mitigation efforts must also take into account the potential loss of desired food constituents and consequently changes to the risk/benefit characteristics of foods.     

Determination of dry matter and crude protein contents of undried forages by near‐infrared reflectance spectroscopy

Near‐infrared reflectance spectroscopy (NIRS) was used to predict the dry matter (DM) and crude protein (CP) contents of untreated forage samples. Four hundred forage samples were analysed in reflectance mode. Two mathematical treatments based on the order of derivative of log(1/R), the gap in data points and the numbers of data points used in the first and second smoothings were applied. Predictive equations were developed using modified partial least squares (MPLS) with internal cross‐validation. The coefficient of determination of calibration and the standard error of cross‐validation (SECV, in parentheses) for DM were 0.92 (12.4), 0.92 (12.6) and 0.93 (11.7) for the two treatments and log(1/R) respectively on a g kg^?1 fresh weight basis. For CP the NIRS calibration statistics yielded and SECV (in parentheses) values of 0.85 (19.8), 0.85 (19.5) and 0.87 (18.1) for the two treatments and log(1/R) respectively on a g kg^?1 fresh weight basis. It was concluded that NIRS is a suitable method to predict the dry matter and crude protein contents of fresh forage without sample preparation. © 2002 Society of Chemical Industry     

Mycotoxin Biomarkers of Exposure: A Comprehensive Review

To date, the use of biomarkers has become generally accepted. Biomarker‐driven research has been proposed as a successful method to assess the exposure to xenobiotics by using concentrations of the parent compounds and/or metabolites in biological matrices such as urine or blood. However, the identification and validation of biomarkers of exposure remain a challenge. Recent advances in high‐resolution mass spectrometry along with new analytical (post‐acquisition data‐mining) techniques will improve the quality and output of the biomarker identification process. Chronic or even acute exposure to mycotoxins remains a daily fact, and therefore it is crucial that the mycotoxins’ metabolism is unravelled so more knowledge on biomarkers in humans and animals is acquired. This review aims to provide the scientific community with a comprehensive overview of reported in vitro and in vivo mycotoxin metabolism studies in relation to biomarkers of exposure for deoxynivalenol, nivalenol, fusarenon‐X, T‐2 toxin, diacetoxyscirpenol, ochratoxin A, citrinin, fumonisins, zearalenone, aflatoxins, and sterigmatocystin.     

PV-GIS: a web-based solar radiation database for the calculation of PV potential in Europe

Solar radiation is a key factor determining electricity produced by photovoltaic (PV) systems. This paper presents a solar radiation database of Europe developed in the geographical information system, and three interactive web applications providing an access to it. The database includes monthly and yearly average values of the global irradiation on horizontal and inclined surfaces, as well as climatic parameters needed for an assessment of the potential PV electricity generation (Linke atmospheric turbidity, the ratio of diffuse to global irradiation, an optimum inclination angle of modules to maximize energy yield). In the first web application, a user may browse radiation maps and query irradiation incident on a PV module for different inclination angles. The second application simulates daily profiles of irradiance for a chosen month and module inclination and orientation. The third web application estimates electricity generation for a chosen PV configuration. It also calculates optimal inclination and orientation of a PV module for a given location. The database and the applications are accessible at http://re.jrc.cec.ev.int/pvgis/pv/imaps/imaps.htm.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.