Monitoring of transient 3D temperature distribution and thermal stress in pressure elements based on the wall temperature measurement

Abstract

Two methods for monitoring the thermal stresses in pressure components of thermal power plants are presented. In the first method, the transient temperature distribution in the pressure component is determined by measuring the transient wall temperature at several points located on the outer insulated surface of the component. The transient temperature distribution in the pressure component, including the temperature of the inner surface is determined from the solution of the inverse heat conduction problem (IHCP). In the first method, there is no need to know the temperature of the fluid and the heat transfer coefficient. In the second method, thermal stresses in a pressure component with a complicated shape are computed using the finite element method (FEM) based on experimentally estimated fluid temperature and known heat transfer coefficient. A new thermometer with good dynamic properties has been developed and applied in practice, providing a much more accurate measurement of the temperature of the flowing fluid in comparison with standard thermometers. The heat transfer coefficient on the inner surface of a pressure element can be determined from the empirical relationships available in the literature. A numerical-experimental method of determination of the transient heat transfer coefficient based on the solution of the 3D-inverse heat conduction problem has also been proposed. The heat transfer coefficient on the internal surface of a pressure element is determined based on an experimentally determined local transient temperature distribution on the external surface of the element or the basis of wall temperature measurement at six points located near the internal surface if fluid temperature changes are fast. Examples of determining thermal and pressure stresses in the thick-walled horizontal superheater header and the horizontal header of the steam cooler in a power boiler with the use of real measurement data are presented.     

Design and Engineering of “Green” Nanoemulsions for Enhanced Topical Delivery of Bakuchiol Achieved in a Sustainable Manner: A Novel Eco-Friendly Approach to Bioretinol

In the present work, we establish novel “environmentally-friendly” oil-in-water nanoemulsions to enhance the transdermal delivery of bakuchiol, the so-called “bioretinol” obtained from powdered Psoralea corylifolia seeds via a sustainable process, i.e., using a supercritical fluid extraction approach with pure carbon dioxide (SC-CO₂). According to Green Chemistry principles, five novel formulations were stabilized by “green” hybrid ionic surfactants such as coco-betaine—surfactin molecules obtained from coconut and fermented rapeseed meal. Preliminary optimization studies involving three dispersion stability tests, i.e., centrifugation, heating, and cooling cycles, indicated the most promising candidates for further physicochemical analysis. Finally, nanoemulsion colloidal characterization provided by scattering (dynamic and electrophoretic light scattering as well as backscattering), microscopic (transmission electron and confocal laser scanning microscopy), and spectroscopic (UV–Vis spectroscopy) methods revealed the most stable nanocarrier for transdermal biological investigation. In vitro, topical experiments provided on human skin cell line HaCaT keratinocytes and normal dermal NHDF fibroblasts indicated high cell viability upon treatment of the tested formulation with a final 0.02–0.2 mg/mL bakuchiol concentration. This excellent biocompatibility was confirmed by ex vivo and in vivo tests on animal and human skin tissue. The improved permeability and antiaging potential of the bakuchiol-encapsulated rich extract were observed, indicating that the obtained ecological nanoemulsions are competitive with commercial retinol formulations.     

Styrylquinolinium borates as donor–acceptor initiators for sensitized photopolymerization of TMPTA

Several photoredox pairs containing mono- and bicationic hemicyanine dyes have been evaluated as photoinitiators for free radical polymerization induced with an argon-ion laser irradiation. The tested photoredox couples are the pairs composed of the hemicyanine dye cations acting as electron acceptors and n-butyltriphenyl borate anions being the electron donors. The photoinitiating abilities of the series of monochromophoric stilbazolium borates, 4-(p-N,N-dialkylaminostyryl)quinolinium n-butyltriphenylborate, were compared to the photochemistry of structurally related, bicationic styrylquinolinium borates. The obtained results clearly documented that the dicationic photoinitiators exhibit a marked increase in the photoinitiation ability compared to the initiators consisting of a single charged hemicyanine dye.Our studies revealed also that the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylquinolinium cation. The relationship between the rate of polymerization and the free energy of activation shows the dependence predicted by the classical theory of electron transfer.     

Wet electroscrubbers for state of the art gas cleaning

Current trends observed in air pollution control technology are closely related to the development of new, more efficient hybrid systems, i.e., those, which simultaneously utilize two or more physical mechanisms for dust or gaseous contaminants removal. These systems can operate more economically than conventional devices, especially in the removal of PM2.5 particles. The electrostatic scrubber (electroscrubber), discussed in this paper, is one of such types of devices, which combines advantages of electrostatic precipitators and inertial wet scrubbers, and removes many shortcomings inherent to both of these systems operating independently. The electroscrubber is a device in which Coulomb attraction or repulsion forces between electrically charged scrubbing droplets (collector) and dust particles are utilized for the removal of particles from a gas. Unlike wet electrostatic precipitators in which particles are precipitated only on the collection electrode, in electroscrubbers, the collection of dust particles takes place in the entire precipitator chamber. Compared to inertial scrubbers, the electroscrubbers can operate at lower droplet velocities, but the collection efficiency for a single droplet can be larger than 1. The paper reviews the state-of-the-art of wet electrostatic scrubbing (electroscrubbing) technique used for gas cleaning from dust or smoke particles. Three groups of problems are discussed: (1) The fundamental problems concerning the charged dust particle deposition on a charged collector, usually a drop, with a focus on different models describing the process. (2) The experimental works of fundamental importance to our knowledge referring to the scrubbing process, which can be used for validating the theory. (3) The laboratory demonstrations and industrial tests of different constructions of electroscrubbers designed for effective gas cleaning. The electroscrubber is not designed to replace wet or dry electrostatic precipitators but can be used as a complementary device following the last stage of conventional electrostatic precipitator, which helps to remove submicron particles. It was shown in the paper that a higher collection efficiency of an electroscrubber could be obtained for higher values of Coulomb number (i.e., higher electric charges on the collector and particle), and for a Stokes number lower than5 (i.e., low particle-collector relative velocity).     

Degrees of Antioxidant Protection: A 2‐Year Study of the Bioactive Properties of Organic Milk in Poland

The aim of this study was to determine the nutritional value of organic milk in Poland, investigate the influence of diet on antioxidant capacity and degree of antioxidant protection (DAP), and to examine the effect of season on the bioactive properties of milk from organic farms. From 2014 to 2015, 820 milk samples were collected from 6 organic farms during indoor feeding season (IDS) and pasture feeding season (PS). Pasture feeding season + corn grain (PSCG) cows’ daily ration during pasture feeding season was enriched with 4 kg a day of corn to improve dietary energy balance. Milk obtained during PS was found to have a higher fat content, slight but significantly lower protein content compared with milk from IDS. The study showed that the content of monounsaturated fatty acids (MUFA) in milk fat was strongly linked to the concentration of polyunsaturated fatty acids (PUFA) and, to a lesser extent, on the supply of MUFA. The IDS data (concentration of vitamin E, A, and β‐carotene) showed the lowest values compared with the PS and PSCG groups. Total antioxidant status (TAS) and DAP showed an increasing trend in organic milk. PSCG was associated with highest level of DAP (9% higher than PS and 79% higher than IDS) and TAS (37% higher than PS and 79% higher than IDS). The results obtained show that supplementation of the basic ration with corn grain improved both TAS and DAP. The higher DAP and TAS value is responsible for product stability, considering the risk factor related to levels of cholesterol‐oxide intake in humans.     

Double criterion optimisation of transparent fa?ades based on solar thermal processes

This work aimed to find the best possible solution for transparent fa?ades. The evaluation was formulated to assure the highest user comfort criteria corresponding to energy efficiency—two criterion optimisation. The analyses were based on BESTEST, south-oriented zone geometry. Computer model was designed using Finite Control Volume Techniques with assumptions for applied materials and specified boundary conditions, plus reference year for energy calculation (WYEC2). The natural ventilation fa?ade system was designed to determine airflow network inside thefa?ade. The adjustable size of openings(inlets and outlets)was selected at the level of 80% for the cold season and totally closed during the hot season. Environmental parameters for thermal comfort evaluation were: zone resultant temperature and solar radiation in zone space. Energy efficiency was assessed based on heat flux between the zone with controlled temperature and external environment. Results showed that well selected design of buffer zone section could improve energy efficiency of adjacent zones for both winter and summer periods. The most profitable Double Skin fa?ade solutionis DGC (double glazing with lowe coating) combined with single glazing with internal blinds (SGB) or coloured glazing.     

Experimental and theoretical investigations of birefringent holey fibers with a triple defect

We have manufactured and characterized a birefringent holey fiber of a new construction. The birefringence in this fiber is induced by the highly elliptical shape of the core, which consists of a triple defect in a hexagonal structure. Using a hybrid edge-nodal finite-element method, we calculated the spectral dependence of phase and group modal birefringence for spatial modes E11 and E21 in idealized and in real fiber, whose geometry we determined by using a scanning-electron microscope. Results of our calculations show that technological imperfections significantly affect the fiber's birefringence. Normalized cutoff wavelengths for higher-order modes relative to the filling factor were also determined for the idealized structure. We observed a significant disagreement between theoretical and experimental values of cutoff wavelengths, which was attributed to high confinement losses near the cutoff condition. We also measured the spectral dependence of the phase and the group modal birefringence for spatial modes E11 and E21. The measured parameters showed good agreement with the results of modeling.     

Benziporphyrins: exploring arene chemistry in a macrocyclic environment

Benziporphyrins are synthetic porphyrin analogues, in which one of the pyrroles is replaced with a benzenoid ring. The arene can be incorporated into the macrocycle in several ways leading to molecules with distinct physical and chemical properties. By appropriately changing the structure of benziporphyrins, it is possible to affect their aromaticity, tautomeric equilibria, and reactivity. Benziporphyrins are versatile ligands, which offer a means to study the metal-arene couple in a macrocyclic environment. The coordination brings the metal ion into the vicinity of the arene fragment leading to activation of C-H bonds or weak interactions, which can be observed spectroscopically.