Photo-Fenton-like treatment of BPA: Effect of UV light source and water matrix on toxicity and transformation products

UV-A (near-UV), UV-C (short-UV) and visible-light assisted Fenton-like treatment of Bisphenol A (BPA) was investigated in pure water and raw freshwater samples spiked with BPA. Treatment performances were evaluated in terms of BPA degradation, dissolved organic carbon (DOC) removal and H₂O₂ consumption rates. Complete BPA degradation accompanied with significant DOC removal was achieved for all studied processes. Increasing the initial solution pH only exhibited a negative effect on treatment efficiencies when bicarbonate alkalinity was used for pH adjustment, whereas the raw freshwater matrix and irradiation type also influenced oxidation rates appreciably. Acute toxicity analysis employing Vibrio fischeri revealed that the inhibitory effect of BPA decreased significantly during the course of Photo-Fenton-like treatment. Several transformation products could be identified via HPLC and GC–MS analyses including hydroxylated phenolic compounds (hydroquinone; 2-methoxy, 1-4-benzenediol; 4-isopropenylphenol; 4′-hydroxy-acetophenone; 1-(4-cyclohexylphenyl) ethanone; 4-isopropylenecatechol; 4-4′-dihydroxybenzophenone; 4-ethyl,1,3-benzenediol), as well as the ring opening products hexanoic acid methyl ester, fumaric, succinic and oxalic acids. A reaction pathway featuring hydroxylation, dimerization and ring opening steps is proposed.     

Seasonal optimal mix of wind and solar power in a future,highly renewable Europe

The renewable power generation aggregated across Europe exhibits strong seasonal behaviors. Wind power generation is much stronger in winter than in summer. The opposite is true for solar power generation. In a future Europe with a very high share of renewable power generation those two opposite behaviors are able to counterbalance each other to a certain extent to follow the seasonal load curve. The best point of counterbalancing represents the seasonal optimal mix between wind and solar power generation. It leads to a pronounced minimum in required stored energy. For a 100% renewable Europe the seasonal optimal mix becomes 55% wind and 45% solar power generation. For less than 100% renewable scenarios the fraction of wind power generation increases and that of solar power generation decreases.     

Thickness swelling and water absorption of WPC after immersion in cold and boiling water

Thickness swelling (TS), water absorption (WA) and edge swelling (ES) of 20 mm flat-pressed wood–plastic composites (WPC) panels with a wood flour (WF) content of 50 and 70 % manufactured using an industrial single-daylight press and samples of a high pressure laminate (HPL) compact panel were determined after immersion in cold water according to EN 317 and boiling water according to EN 438 in order to propose, describe and verify a method to (1) measure TS, WA and ES more quickly than by applying EN 317 and (2) to make the properties of WPC and HPL comparable to each other. TS, WA and ES of WPC panels determined after immersion in cold and boiling water were found to correlate with a correlation coefficient of 95–99 % equating 24 h (EN 317) and 0.5 h (EN 438) to factor x. Properties of WPC panels with WF content of 50 % were found to be comparable, respectively superior to those of HPL.     

MRI-based finite element modeling of head trauma: spherically focusing shear waves

A powerful tool for investigating the physical process producing head trauma is finite element (FE) modeling. In this paper, we present a 3D FE model of the human head that accounts for important geometric characteristics of the various components within the human head through an efficient magnetic resonance imaging voxel-based mesh generation method. To validate the FE model, a previous cadaver experiment of frontal impact is simulated, and this is where heretofore unknown wave patterns are discovered. The model is run under either of two extreme assumptions concerning the head-neck junction—free or fixed—and the experimental measurements are well bounded by the computed pressures from the two boundary conditions. In both cases the impact gives rise to not only a fast pressure wave but also a slow and spherically convergent shear stress wave which is potentially more damaging to the brain tissue.     

The Alkylquinolone Repertoire of Pseudomonas aeruginosa is Linked to Structural Flexibility of the FabH‐like 2‐Heptyl‐3‐hydroxy‐4(1H)‐quinolone (PQS) Biosynthesis Enzyme PqsBC

Pseudomonas aeruginosa is a bacterial pathogen that causes life‐threatening infections in immunocompromised patients. It produces a large armory of saturated and mono‐unsaturated 2‐alkyl‐4(1H)‐quinolones (AQs) and AQ N‐oxides (AQNOs) that serve as signaling molecules to control the production of virulence factors and that are involved in membrane vesicle formation and iron chelation; furthermore, they also have, for example, antibiotic properties. It has been shown that the β‐ketoacyl‐acyl‐carrier protein synthase III (FabH)‐like heterodimeric enzyme PqsBC catalyzes the last step in the biosynthesis of the most abundant AQ congener, 2‐heptyl‐4(1H)‐quinolone (HHQ), by condensing octanoyl‐coenzyme A (CoA) with 2‐aminobenzoylacetate (2‐ABA), but the basis for the large number of other AQs/AQNOs produced by P. aeruginosa is not known. Here, we demonstrate that PqsBC uses different medium‐chain acyl‐CoAs to produce various saturated AQs/AQNOs and that it also biosynthesizes mono‐unsaturated congeners. Further, we determined the structures of PqsBC in four different crystal forms at 1.5 to 2.7 Å resolution. Together with a previous report, the data reveal that PqsBC adopts open, intermediate, and closed conformations that alter the shape of the acyl‐binding cavity and explain the promiscuity of PqsBC. The different conformations also allow us to propose a model for structural transitions that accompany the catalytic cycle of PqsBC that might have broader implications for other FabH‐enzymes, for which such structural transitions have been postulated but have never been observed.     

Nanocomposites of SnO2 and g-C3N4: Preparation,characterization and photocatalysis under visible LED irradiation

Tin dioxide nanoparticles were prepared in the presence of graphitized carbon nitride (g-C₃N₄) forming nanocomposites with different contents of SnO₂ up to 40 %. G-C₃N₄ was synthetized by heating of melamine at 550 °C in the open air and Sn²⁺ ions were precipitated by sodium hydroxide in g-C₃N₄ aqueous dispersions. Resulting mixtures were dried by freezing at ?20 °C and calcined at 450 °C to obtain SnO₂/g-C₃N₄ nanocomposites.The nanocomposites were characterized by common characterization methods in solid state and in their aqueous dispersions using dynamic light scattering (DLS) analysis and photocatalysis. SnO₂ nanoparticles in the nanocomposites were found to have an average size of 4 nm, however, those precipitated without g-C₃N₄ had an average size of 14 nm. Separation of photoinduced electron and holes via heterojunction between SnO₂ and g-C₃N₄ was demonstrated by photocatalytic decomposition of Rhodamine B (RhB) under LED visible irradiation (416 nm) and photocurrent measurements. The most photocatalytically active nanocomposite contained 10 % of SnO₂. Graphitized carbon nitride was assumed to serve as a template structure for the preparation of SnO₂ nanoparticles with a narrow size distribution without using any stabilizing additives.     

大挖掘园

人人心中都有一个世界梦,幻想着世界另一端的景象。在西方国家,孩子们都知道:如果一直挖地洞,就会挖到中国去,多么疯狂而美妙的想法!在西安世园会,设计者要实践童年的梦想:挖一个神秘地洞,让每个人都可以在这里去到世界的彼端。大挖掘园是个完全开敞的展园,一个巨大的地洞是展园中     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.