Properties of the peptides liberated from rice protein in sokujo-moto

In the supernatant of sokujo-moto, a high level of acid carboxypeptidase (ACP) activity and a large amount of peptides were observed, however, the amount of free amino acids liberated was small. In order to determine why these peptides were not hydrolyzed to any significant degree by the ACP, the properties of the peptides in sokujo-moto were investigated in this study. Peptides were fractionated from sokujo-moto by ion exchange column chromatography. ACP purified from rice-koji (rice overgrown with Aspergillus oryzae) was allowed to react with the peptides, and it was found that they were not hydrolyzed to any significant degree by the enzyme. Gel filtration chromatography was performed to ascertain the molecular size distribution of the peptides in sokujo-moto, and it was revealed that they were of low molecular sizes; molecular size: mainly in the range of 200-400, and chain length: 2-3. ACP purified from rice-koji was also allowed to react with various synthetic peptides, and it was found that ACP of rice-koji could not rapidly hydrolyze low-molecular-size peptides, such as dipeptides or tripeptides. Acid protease (AP) purified from rice-koji released peptides of molecular sizes mainly in the range of 300-600 or above from rice protein under acidic conditions (pH 3.6; the pH of sokujomoto). When AP and ACP were allowed to act at the same time on rice protein, mainly low-molecular-size peptides (molecular sizes mainly in the range of 200-400) were produced. From these results, it was estimated that AP released peptides with molecular sizes mainly in the range of 300-600 or above from rice protein and ACP degraded the relatively higher molecular size peptides among them to lower molecular size peptides; consequently only low-molecular-size peptides with molecular sizes mainly in the range of 200-400 were released in the supernatant of sokujo-moto.     

Classification and identification of strains of Lactobacillus brevis based on electrophoretic characterization of D-lactate dehydrogenase: relationship between D-lactate dehydrogenase and beer-spoilage ability

The cell-free extracts of 60 strains which were identified phenotypically as being those of Lactobacillus brevis, including 48 isolates from the environment and 12 reference strains, were applied to polyacrylamide gel electrophoresis for extracting their NAD-dependent D- and L-lactate dehydrogenases (LDH). These strains were divided into 5 groups, i.e., Groups A, B, C, D, and E, on the basis of the electrophoretic mobilities of their D-LDH. The strains showed variations in their carbohydrate fermentation patterns. No relationship between the profile of D-LDH and the carbohydrate fermentation pattern was recognized. However, there appeared to be a relationship between the D-LDH profile and the beer-spoilage ability, because 40 out of 44 beer-spoilage strains identified as L. brevis were classified to Group B. We purified D-LDHs from the so-called complete beer-spoilage strain SBC 8002 of LDH Group B and from the non beer-spoilage strains JCM 1059T of LDH Group A and AHU 1508 of LDH Group C. Although the purified D-LDHs had the same molecular weight (84 kDa), each possessed a different optimum pH, optimum temperature, and isoelectric point. The aforementioned parameter values for the enzyme from the so-called complete beer-spoilage strain SBC 8002 of LDH Group B were 10.0, 50 degrees C, and 4.1, respectively; this strain was discriminated from the D-LDHs of the other two non beer-spoilage strains especially by its optimum temperature (50 degrees C).     

Electrical Properties of Isotropic Conductive Adhesives Composed of Silicone-Based Elastomer Binders Containing Ag Particles

The electrical properties of isotropic conductive adhesives (ICAs) with two different types of silicone-based binder containing Ag particles were examined. The ICAs were printed on glass substrates in order to prepare specimens for evaluating the electrical properties. In the case of adhesives containing a denatured silicone binder, both the curing and cooling steps in the isothermal curing process generated electrical conductivity. Adhesives that were cured at 120°C to 200°C exhibited similar values of electrical resistivity regardless of the different curing temperatures. By contrast, electrical conductivity was generated only during the cooling step when adhesives containing a dimethyl methylvinyl siloxane were isothermally cured. In this case, adhesives cured above 160°C exhibited high electrical resistivity. In evaluating the temperature dependence of the electrical resistivity, we found physical annealing to have significantly different effects on these specimens. In addition, we were able to make small sensitive variations in the properties of silicone-based ICAs by controlling the isothermal annealing and thermal cycling processes.     

Polarization-, Wavelength-, and Filter-Free All-Optical Clock Recovery in a Passively Mode-Locked Laser Diode With Orthogonally Pumped Polarization-Diversity Configuration

We proposed and demonstrated all-optical clock recovery system using a monolithic mode-locked laser diode (MLLD) that operated with less sensitivity to the polarization and the wavelength of the input data signals also with no bandpass filter to eliminate the input signal-components. The keys to this new technique are the MLLD integrated with a tensile-strained quantum-well saturable absorber and a new polarization-diversity setup by signal input orthogonally polarized to the lasing polarization of the MLLD. This approach was experimentally validated in the 40 Gbps clock recovery experiments. The results exhibited excellent performance of the clock recovery with low timing jitters (<0.3 ps) remaining small dependence on the wavelength and the polarization of the input data signals and input-signal suppression less than -30 dB with no use of the bandpass filter. We also succeeded in the stable clock recovery for the input of polarization-scrambled data signals.     

Light modulator using piezoelectric films with waveguides

A light modulator using piezoelectric films based on optical interference of the Mach-Zehnder type has been proposed and demonstrated. The modulator is constructed with two optical waveguides joined to each other at both ends to divide the incident light and to recombine them, and each waveguide is fabricated on a polyvinylidene fluoride (PVDF) film to serve as a voltage-driven phase-shifter.     

Lithium Phenolate Complexes with a Pyridine‐Containing Polymer for Solution‐Processable Electron Injection Layers in PLEDs

A series of (vinylphenyl)pyridine‐based polymer binders, PVPh2Py, PVPh3Py, and PVPh4Py, are designed and synthesized and it is found that mixtures of Liq and the polymers exhibit superior electron injection characteristics as ultrathin (1.6 nm) electron injection layer (EIL) films. They are comparable to those of EILs composed only of Liq. The addition of the polymers does not deteriorate the performance of Liq EILs. Additionally, when the EIL thickness is increased from 1.6 nm to 16 nm, the driving voltages increase and the external quantum efficiencies decrease. The increase in the voltage and decrease in the EQE are suppressed in the device with mixed EILs compared to those observed for the device composed of 100 wt% Liq. Furthermore, the position of the nitrogen in the pyridine ring is considered to influence the electron transport properties of the EILs. The mixing PVPh4Py with Liq improves the driving voltage of the fabricated devices, even with a thick mixed EIL. This reduced dependence of the performance of EILs on their thickness will be advantageous for the coating of large areas using solution processes.     

Phase and magnetic properties of iron oxide clusters in 20CaO·20SiO2·7Fe2O3·6FeO glasses

The annealing of 20CaO·20SiO₂·7Fe₂O₃·6FeO glasses at 973K in vacuo produced clusters of iron oxide, the shape of which was nearly spherical and the diameter distributed in the narrow range 25–115Å. The phase of clusters was identified to be Fe³⁺(Fe³⁺ _{poststagger|1.30}Fe²⁺ _{poststagger|0.55}V_0.15)·O₄ in the inverse spinel structure based upon the Mössbauer spectra and x-ray diffraction profiles. The clusters exhibited superparamagnetism and their effective anisotropy energy constant was inversely proportional to the cluster diameter. The magnetization of the glasses measured by a vibrating sample magnetometer was 7.2 × 10^-6 Wbmkg^-1 at 10 kOe at room temperature and smaller than the value calculated assuming that the whole clusters have superparamagnetism. These results suggest the pinning of spins near the cluster surface.     

a-SiC:H/SiO2 Laminated Polarization Splitter for the Wavelength Region Longer Than 1.3 μm Prepared by Plasma-Enhanced Chemical Vapor Deposition

A laminated polarization splitter for the wavelength region longer than 1.3 μm is fabricated for the first time. It is composed of a-SiC:H/SiO₂ alternative multilayers prepared by plasma-enhanced chemical vapor deposition. Splitting behavior is also verified experimentally. It has low absorption loss even for the wavelength region around λ = 1.3 μm because the band-gap energy of a-Sic is larger than that of a-Si. The measured splitting angle is 13.8°, which is 2.4 times larger than the 5.7° splitting angle of rutile. The absorption loss of the multilayer is reduced to 1 × 10^-3 dB/μm at λ = 1.3 μm. The magnitude of the residual stress is 9.45 × 10⁸ dyn/cm², which is about one-third of that prepared by the rf bias sputtering equipment which is used for another project of our group. The deposition rate of SiO₂, is increased to 135 nm/min, which is 27 times larger than that prepared by the sputtering equipment.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Dual-band circularly polarized equilateral triangular-patch array antenna for mobile satellite communications

The Japan Aerospace Exploration Agency will launch the Engineering Test Satellite VIII (ETS-VIII) in 2006 to support the next generation of mobile satellite communications covering the area of Japan (beam coverage El=38/spl deg/ to 58/spl deg/). In this paper, a satellite-tracking left-handed circularly polarized triangular-patch array antenna is developed for ground applications. The targeted minimum gain of the antenna is set to 5 dBic at the central elevation angle (El=48/spl deg/), in the Tokyo area, for applications using data transfer of around a hundred kbps. The antenna is composed of three equilateral triangular patches for both reception and transmission units operating at 2.50 and 2.65 GHz frequency bands, respectively. The antenna was simulated by method of moments (MoM) analysis, and measurement of the fabricated antenna was performed to confirm the simulation results. The measurement results show that the frequency characteristics and the 5-dBic gain coverage in the conical-cut plane of the fabricated antenna satisfy the specifications for ETS-VIII. A prototype of the proposed antenna system is employed in outdoor experiments using a pseudosatellite and shows good performance from El=38/spl deg/ to 58/spl deg/.