Hydrophobic Tagged Dihydrofolate Reductase for Creating Misfolded Glycoprotein Mimetics

In the endoplasmic reticulum (ER), nascent glycoproteins that have not acquired the native conformation are either repaired or sorted for degradation by specific quality‐control systems composed by various proteins. Among them, UDP‐glucose:glycoprotein glucosyltransferase (UGGT) serves as a folding sensor in the ER. However, the molecular mechanism of its recognition remains obscure. This study used pseudo‐misfolded glycoproteins, comprising a modified dihydrofolate reductase with artificial pyrene–cysteine moiety on the protein surface (pDHFR) and Man₉GlcNAc₂‐methotrexate (M9‐MTX). All five M9‐MTX/pDHFR complexes, with a pyrene group at different positions, were found to be good substrates of UGGT, irrespective of the site of pyrene modification. These results suggest UGGT's mode of substrate recognition is fuzzy, thus allowing various glycoproteins to be accommodated in the folding cycle.     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Investigation on twisting distortion of thin plate stiffened structure under welding

The welding distortion of thin plate was selected as research subject, which causes loss of dimensional control, structural integrity and increases fabrication costs for straightening. To study the characteristic of the welding distortion on thin plate structures, experiments were conducted. The test model was a thin plate stiffened structure and a large twisting distortion was observed. The welding distortion of the same structure was analyzed as a large deformation problem using a thermal elastic plastic FEM and an elastic FEM based on the concept of inherent deformation. The computed results by both methods showed the twisting distortion which is a typical buckling type deformation and the magnitude of this distortion agreed well with the experimental measurement.     

An Improved Method for Preparing Dimethyl Disulfide Adducts for GC/MS Analysis

Dimethyl disulfide (DMDS) adducts are prepared from fatty acid methyl esters to locate the double-bond position in monoenoic fatty acids by gas chromatography/mass spectrometry. We improved our original procedure for preparing DMDS adducts with a simple device that can be made in any laboratory using a glass pipette and silica based packing material, Extelut NT.     

The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

Zirconium mesostructures immobilized in calcium alginate for phosphate removal

Eutrophication caused by the excessive supply of phosphate to water bodies has been considered as one of the most important environmental problems. In this study, the powder of zirconium mesostructure (ZM), which was prepared with the template of surfactant, was immobilized in calcium alginate for practical application and the resulting material was tested to evaluate the phosphate removal efficiency. Sorption isotherms and kinetic parameters were obtained by using the entrapped ZM beads with 30 to 60% of ZM. The maximum sorption capacity increased with the higher ZM content. Q _max in Langmuir isotherm was 51.74 mg/g for 60% of ZM with 7 mm of size. The smaller the particle size of the ZM beads, the faster the rate of phosphate removal, because the phosphate ions had less distance to reach the internal pores of the immobilized ZM beads. Chemical and electrochemical regeneration techniques were compared. Phosphates adsorbed on the ZM beads were effectively desorbed with NaCl, NaOH, and Na₂SO₄ solutions. An electrochemical regeneration system consisting of an anion exchange membrane between two platinum-coated titanium electrodes was successfully used to desorb and regenerate the phosphate-saturated ZM beads. Complete regeneration was reached under optimal experimental conditions. Chemical and electrochemical regeneration proved the reusability of the bead form of the entrapped ZM, and will enhance the economical performance of the phosphate treatment process.     

Fast and Almost Complete Nitridation of Mesoporous Silica MCM-41 with Ammonia in a Plug-Flow Reactor

The title reaction proceeded well to yield silicon (oxy)nitride at 973–1323 K using a plug-flow reactor. The degree of nitridation was studied as a function of temperature and time of nitridation, the sample weight, and the flow rate of ammonia. It was dependent on the reaction temperature and the amount of ammonia supplied per sample weight. The nitridation at 1273 K for 10–25 h yielded the oxynitride with 36–39 wt% nitrogen, which was very close to 40 wt% of Si₃N₄. Characterization with X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy measurements, and nitrogen adsorption revealed the conversion of MCM-41 to the corresponding oxynitride without essential loss of the mesoporous structure, the decrements of the lattice constant and the pore diameter by 20–35%, and the increments of the wall thickness by ca. 45%. Solid-state ²⁹Si nuclear magnetic resonance spectra during the nitridation clearly showed fast decrease in SiO₄ species and slow in SiO₃(OH). Various intermediate species, SiO _x N _y (NH₂ or NH) _z , were observed to be formed and finally, ca. 70% SiN₄ species, ca. 20% SiN₃(NH₂ or NH), and ca. 10% SiON₂(NH₂ or NH) were produced, being consistent with the results of the above mentioned elemental analysis.     

Effect of heating process on the formation of nanoparticles of elastin model polypeptide, (GVGVP)251, by gamma-ray crosslinking

Nanoparticles were prepared by the thermosensitive aggregation of the elastin model polypeptide, (GVGVP)₂₅₁, and gamma-ray crosslinking. Three different heating processes, “slow heating,” “fast heating,” and “heat shock,” were used for the aggregation of the peptide, followed by gamma-ray crosslinking. Only the “heat shock” process successfully yielded stable nanoparticles with diameters of less than ca. 150 nm and a narrow size distribution. Circular dichroism (CD) spectrometry showed that this polypeptide formed a type-II β-turn structure when the temperature was increased to above the cloudy point in the case of the “heat shock” process; suggesting that this structure might contribute to stable nanoparticle formation by gamma-rays. CD spectrometry also suggested that this structure would be affected during the formation of stable crosslinked particles.     

Effect of gaseous ammonia on barley straws showing different rumen degradabilities

Straw samples from five cultivars of spring barley (Hordeum vulgare L; Golden Promise, Golf, Klaxon, Heriot and Doublet), selected to show a range of rumen degradabilities, were examined to measure the effect of gaseous ammonia on aspects of their cell wall composition and degradability after treatment. Cellulose degradability of the untreated straws, as measured by the nylon-bag method, ranged from 41.0% for Golden Promise to 57.1% for Doublet. The extent of improvement in degradability following ammonia treatment was 12.5% units for Golden Promise and only 2.5% units for Doublet, showing that the effect of ammonia was more pronounced for materials of lower inherent degradability (r= ?0.774). Straw from three of the five cultivars was dissected into its botanical parts, and the dry matter content and digestibility of the fractions were determined. Leaf material formed a higher fraction of dry matter in Doublet (0.48), the most degradable cultivar, than in Golden Promise (0.30), the least degradable straw. Half of the observed difference in degradability between Doublet and Golden Promise could be attributed to differences in dry matter distribution between botanical fractions. For untreated straw, degradability was weakly, negatively correlated with the proportion of arabinose residues substituted with alkali-labile linkages at position 0–5 (r = ?0.690), and positively correlated with the moisture retention (water-holding capacity) of straws (r = 0.838), water-soluble dry matter content (r = 0.922) and water-soluble phenolic content (r = 0.791). The proportion of pentose residues carrying alkali-labile linkages was only slightly decreased followign ammonia treatment. In the case of the 0–5 position of arabinose residues the original values were reduced by 2.4–15.9%. Ammonia treatment had little effect on the capacity of the straw to retain moisture, and did not significantly increase the proportion of water-soluble dry matter or phenolics. Cellulose degradability, or the improvement in degradability, of ammonia-treated straw was not correlated with any of the physical and chemical characteristicds of staw considered above.