Accelerated weathering-induced degradation of poly(lactic acid) fiber studied by near-infrared (NIR) hyperspectral imaging

Hydrolysis degradation of a set of drawn poly(lactic acid) (PLA) fibers was induced by an accelerated weathering test, radiating ultraviolet (UV) light under a certain temperature and humidity. The fine features of the transient behavior of the PLA fibers were captured by near-infrared (NIR) hyperspectral imaging. The PLA fibers showed a gradual decrease in mechanical property (e.g., tensile strength), indicating hydrolysis degradation. Thus, the detailed analysis of the spectral variation, in turn, offers useful information on the molecular-level degradation behavior of the drawn PLA fibers. The variation of the spectral intensity as well as band position shift of the crystalline band of PLA was analyzed. The spectral intensity of the crystalline band of PLA showed gradual decrease, suggesting the decrease in molecular weight induced by the hydrolysis degradation. In addition, the crystalline band also exhibited a coinciding shift to the lower wavenumber direction with the weathering test, revealing cleavage-induced crystallization of the PLA samples. Consequently, the hydrolysis degradation induced by the weathering test substantially accelerates predominant degradation of the amorphous structure of the PLA and such variation of the molecular structure, in turn, brings less ductility to the PLA fiber.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Impedance characteristics of double-hetero structure laser diodes

The effects of the onset of lasing on the I-V characteristics, the impedance characteristics and the light modulation characteristics of laser diodes have been discussed by introducing the rate equations which involve carrier diffusion process in the active layer interacting with the radiation field intensity. The static I-V characteristics exhibit a kink at lasing threshold current, reflecting the decrease of effective lifetime of carriers. Effective carrier lifetimes decrease with increasing light intensity, which results in a steep attenuation of injected carrier density in the active region. The impedance and light modulation characteristics are obtained in the small signal approximation. The small signal light modulation characteristics depend strongly on whether the laser diode is excited by the constant current modulation or the constant voltage modulation. The impedance is changed drastically by the onset of lasing and exhibits a resonance which coincides exactly with the optical modulation resonance frequency.     

Study on the urban heat island mitigation effect achieved by converting to grass-covered parking

The urban heat island mitigation effect of conversion from asphalt-covered parking areas to grass-covered ones is estimated by observation and calculation. The mean surface temperature in a parking lot is calculated from a thermal image captured by an infrared camera. The sensible heat flux in each parking space is calculated based on the surface heat budget. The reduction in the sensible heat flux is estimated to be approximately 100-150 W m⁻² during the day and approximately 50 W m⁻² during the night, in comparison with an asphalt surface. The air temperature reduction by the spread of grass-covered parking areas is calculated to be about 0.1 °C. Furthermore, consideration is given to the appearance of the parking lot, the growth of grass, the effects of the weight of a car and the heat radiated from its engine, the costs of construction and maintenance, etc.     

Power system control method using customers' energy storage systems and the verification of proposed method

Advanced energy storage systems have been widely applied to industries and are being installed at large buildings and factories to realize efficient energy usage. This paper presents a control method involving load frequency control and distribution network control (loss reduction control) using a part of customers' owned battery capacity. When 10% of total battery capacity of 100 MW in a network of 30‐GW generator capacities is used for load frequency control, a total of 1500‐MW generation units for load frequency control, at maximum, can be stopped without deterioration of power quality. In addition, when batteries are used for loss reduction in a distribution network, 2% of the loss on a summer day can be reduced. To realize both effects to their fullest, a novel integrated control algorithm is proposed and its economic effect is evaluated by numerical simulations. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 11–20, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20704     

Damage repair in CMSX-4 alloy without fatigue life reduction penalty

The microstructural changes in a single-crystal Ni-base superalloy, CMSX-4, that might occur during the processes of repair and recoating of hot section components for advanced gas turbines were studied. It is shown that the cellular γ/γ′ microstructure is formed when the material is subjected to local plastic straining, followed by the reheat treatments during the course of damage recovery. The formation of cellular microstructure in the material led to the remarkably reduced fatigue strength. In order to reduce or prevent the preceding undesirable effect resulting from cellular microstructure, a new method based on applying overlay coating technique was developed. The method is based on an idea that the alloying elements that are depleted in base alloys could be supplemented via the overlay coating. An X alloy, which contains grain boundary strengthening elements, was selected and coated on the CMSX-4 with the cellular microstructure by low-pressure plasma spraying. The fatigue tests on the coated CMSX-4 specimens demonstrated the effectiveness of the method. The observations of the crack initiation site, the fatigue fracture mode, the crack density in the cellular transformed area, and the crack propagation morphologies near the prior interface strongly supported the validity of this approach. The method is expected to build a road to a so-called damage cure (or recovery) coating.     

ESR study on radical polymerization of styrene

Summary Propagation rate constant (k_p) for styrene was evaluated at different chain lengths of the polymer radical based on the steady-state concentration of the polymer radical determined by means of ESR spectroscopy at 70°C. Over a range of degree of polymerization of the polymer radical from 40 to 410, the value of k_p, 480±10 L/mol·s, remained constant. A considerable increase in viscosity of the polymerization mixture did not affect this value.     

Removal of Cr(VI) from aqueous solution by London plane leaves

The effect of initial metal concentration, contact time and solution temperature on the removal of Cr(VI) from solution by waste London plane leaves, generated by the pruning of street trees, was investigated in batch mode conditions. The removal of Cr(VI) was highly concentration‐dependent and mainly governed by physico‐chemical adsorption under the weak acidic conditions studied. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures and both the adsorption capacity and adsorption intensity increased with rising temperature. The endothermic nature of the Cr(VI) adsorption was confirmed by the thermodynamic parameters. The study has shown that the waste leaves can be used as an effective adsorbent for removal of Cr(VI) from wastewater. Copyright © 2003 Society of Chemical Industry     

Cutting plane methods for Lagrangian relaxation‐based unit commitment algorithm

In this paper, we study cutting plane methods for a Lagrangian relaxation‐based unit commitment algorithm. In the algorithm, nondifferentiable optimization methods can be applied to optimize the dual function, and a subgradient method which needs parameter tuning and has some drawbacks such as computational inefficiency and oscillating behavior is commonly used. The cutting plane method and the central cutting plane method are applied to the algorithm and implemented using reoptimization techniques. A numerical example shows that both methods are accelerated by the reoptimization techniques and have good convergence without parameter tuning. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 17–29, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10066