Numerical simulation and PIV measurement of the flow-field in optical disc drives

A system of numerical flow simulation with an automated mesh generator and parallelized solver was developed and applied to the flow-field inside an optical disc drive. In this simulation system, a uniformly spaced Cartesian grid is used to reduce time and automatically generate a mesh from CAD data for complicated geometries, such as optical disc drives. The simulation results of optical disc drives are validated by particle image velocimetry (PIV) and pressure-distribution measurements. The measured velocity distributions above a rotating disc and around a pick-up unit show quantitative agreement with the simulated distributions. For the pressure distributions on a top case of an optical disc drive, although there is an error of 10% between simulated and measured results, the position of the peaks and distribution of pressure show good agreement. Comparing both sets of measurements, the simulation results in a Cartesian grid system are sufficiently accurate to enable the flow-field to be quantitatively assessed. This numerical flow simulation is applied to investigate the detailed flow-field in a commercial optical disc drive.     

Corrosion behavior of Ti-Ag alloys used in dentistry in lactic acid solution

The purpose of this study was to evaluate the corrosion resistance of experimental Ti-Ag alloys used as dental materials. An elution test and a rest-potential measurement of alloys with 5–30 mass.% Ag were performed in a 1 % lactic acid solution. The amount of Ti ions released from the α phase of the Ti-Ag alloys decreased as the Ag concentration increased. TiAg present in the alloys dissolved preferentially, but Ti₂Ag did not. The rest potentials of the Ti-Ag alloys were significantly higher than that of pure titanium. The elution test and the rest-potential measurement revealed that the Ti-Ag alloys, which formed a single α-titanium structure or contained a titanium and Ti₂Ag, had excellent corrosion resistance that was comparable or superior to that of pure titanium.     

Determination of 240Pu/239Pu atom ratio in seawaters from the East China Sea

The (240)Pu/(239)Pu atom ratios in seawater samples on the East China Sea continental shelf were measured. These ratios for surface and bottom waters had no significant difference. They were significantly higher than the average global fallout ratio of 0.18. It was proposed that the oceanic currents are accounted for delivery of close-in Pu from the Pacific Proving Grounds (PPG) to the studied areas. The contribution of the PPG close-in fallout was calculated to be 40 % on average. The (240)Pu/(239)Pu atom ratios should provide useful background data before the expected expansion of nuclear power capacity in East and South Asian countries and for distinguishing future sources of Pu.     

Practical Application of ±250‐kV DC‐XLPE Cable for Hokkaido–Honshu HVDC Link

The long‐term dc properties of DC‐XLPE insulation materials, which have been developed for dc use, were investigated. It was found that the lifetime of DC‐XLPE under dc voltage application is extended by the addition of nano‐sized filler. The time dependence of the space charge distribution at 50 kV/mm was observed for 7 days. Almost no accumulation of space charge in DC‐XLPE was found. The 250‐kV DC‐XLPE cables and accessories were manufactured and subjected to a type test and PQ test for use in the Hokkaido–Honshu dc link facility owned by the Electric Power Development Co., Ltd. These tests were performed under conditions that included a polarity reversal test for line commutated converter (LCC) systems as recommended in CIGRE TB 219. The test temperature was 90 °C. The type test and PQ test were successfully completed. The DC‐XLPE cable and accessories were installed in summer 2012 for the Hokkaido–Honshu dc link. After the installation of the dc extruded cable system, a dc high‐voltage test at 362.5 kV (=1.45 PU) for 15 min was successfully completed in accordance with CIGRE TB 219. This dc extruded cable system was put into operation in December 2012 as the world's highest‐voltage extruded dc cable in service and the world's first dc extruded cable for a LCC system including polarity reversal operation.     

Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Genotoxicity of nano/microparticles in in vitro micronuclei, in vivo comet and mutation assay systems

Background

Recently, manufactured nano/microparticles such as fullerenes (C₆₀), carbon black (CB) and ceramic fiber are being widely used because of their desirable properties in industrial, medical and cosmetic fields. However, there are few data on these particles in mammalian mutagenesis and carcinogenesis. To examine genotoxic effects by C₆₀, CB and kaolin, an in vitro micronuclei (MN) test was conducted with human lung cancer cell line, A549 cells. In addition, DNA damage and mutations were analyzed by in vivo assay systems using male C57BL/6J or gpt delta transgenic mice which were intratracheally instilled with single or multiple doses of 0.2 mg per animal of particles.

Results

In in vitro genotoxic analysis, increased MN frequencies were observed in A549 cells treated with C₆₀, CB and kaolin in a dose-dependent manner. These three nano/microparticles also induced DNA damage in the lungs of C57BL/6J mice measured by comet assay. Moreover, single or multiple instillations of C₆₀ and kaolin, increased either or both of gpt and Spi^- mutant frequencies in the lungs of gpt delta transgenic mice. Mutation spectra analysis showed transversions were predominant, and more than 60% of the base substitutions occurred at G:C base pairs in the gpt genes. The G:C to C:G transversion was commonly increased by these particle instillations.

Conclusion

Manufactured nano/microparticles, CB, C₆₀ and kaolin, were shown to be genotoxic in in vitro and in vivo assay systems.     

Electrochemical behaviors of uranium and plutonium at simultaneous recoveries into liquid cadmium cathodes

Experiments were conducted on simultaneous recovery of uranium and plutonium electrochemically into laboratory scale liquid cadmium cathodes (LCCs) at different U/Pu ratios in the salt phase, and the influence of the salt composition on the recovered amounts of uranium and plutonium, the morphologies of uranium and plutonium in the LCC, and the behavior of americium, which is present as a decay product of plutonium-241, were examined. As a result, it was shown that there is a threshold in the U/Pu ratio in the salt phase between 1/4.3 and 1/1.73 for the successful simultaneous recovery of uranium and plutonium up to 10 wt% in the LCC at high current efficiencies. In the LCC, uranium and plutonium existed in the forms of intermetallic compounds, (U, Pu)Cd₆ and (U, Pu)Cd₁₁, and also pure uranium metal. It was also revealed that americium associates with plutonium according to the separation factor during the LCC operation.     

Automatic EEG interpretation adaptable to individual electroencephalographer using artificial neural network

In view of the fact that the visual EEG interpretation could be a subjective task and may vary among the electroencephalographers, the main objective of this study was to develop an automatic EEG interpretation system which is adaptable to each electroencephalographer. The system adapted to each electroencephalographer would bring a close automatic EEG interpretation to that done by the electroencephalographer's visual interpretation. The adaptable automatic EEG interpretation was accomplished by using the constructive neural network with forgetting factor. The artificial neural network was constructed so as to give the integrative interpretation of the EEG based on the intermediate judgment of 13 items that characterized the visual interpretation. The developed method was evaluated based on the visually inspected EEG data of 37 patients by electroencephalographer‐A and the data of 20 patients by electroencephalographer‐B. The adapted ANN showed good agreement with each electroencephalographer's visual inspection. The proposed automatic EEG interpretation by use of the ANN can be a powerful assistant tool for individual electroencephalographers for their EEG interpretation. Copyright © 2001 John Wiley & Sons, Ltd.     

A kinetic investigation of thermally initiated emulsion copolymerization of styrene and methylmethacrylate without conventional initiators

The thermally initiated emulsion copolymerization of styrene (ST) and methyl methacrylate (MMA) was carried out in the absence of conventional initiators. The hydroperoxide (HPO) concentration in the monomers, sodium dodecyl sulfate (SDS), deionized water, and the formulation of those for emulsion copolymerization were measured. The HPO concentration in ST and MMA increased with the storage time, and were considered to be the major sources of HPO. The thermal decomposition of hydroperoxide in monomers, the thermal initiation of ST by Mayo mechanism, and the complex formation between SDS and the monomers were proposed to be three main sources of the radical generation. It was confirmed that new polymer particles were generated throughout the polymerization process, and consequently resulted in a broader distribution of polymer particle size, compared with that for conventional emulsion polymerization. Approximately 80 wt % of monomer conversion was obtained in the presence of SDS at 373 K in 24 h. The initiation rate of the 30 wt % monomer charge was faster than those of 10 wt % and 20 wt % monomer charge. The latex instability at higher solid content was improved by adding electrolyte to promote the electrostatic repulsion force between the polymer particles. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 455–467, 2002; DOI 10.1002/app.2343