一种分布式数字海洋云系统研究

海洋数据分布区域广泛且数据量庞大,现有数字海洋系统相对独立,海洋数据信息共享度低,制约了大规模海洋数据的高性能计算。为"数字海洋"系统提供有力的数据支持和计算服务。本文提出一种基于云的分布式数字海洋系统,把不同的海洋数据通过高速网络连接起来建立一个存储云,使用一个专用的网络服务协议,用于高性能广域网络连接的计算机集群所进行的大型分布式数据集的高性能计算。实验结果表明,与现有基于Hadoop分布式数字海洋系统相比,该系统的性能有显著提高、数据高度共享。     

焊缝跟踪技术的研究与展望

本文回顾了电弧焊接的焊缝跟踪技术，并重点对该技术的发展趋势进行了介绍与分析，     

铸造镍基高温合金的蠕变阻力

在对颗粒强化理论和位错蠕变理论进行回顾、评价基础上，发展了一个位错蠕变阻力模型，认为蠕变阻力是影响铸造镍基高温合金蠕变机制的重要因素。当施加应力足以使位错切入γ′相时，主要蠕变机制是位错切割γ′相过程，蠕变阻力就是位错切入γ′相的临界门槛应力。在低施加应力区，位错只能借助于热激活攀移过程通过γ′相。蠕变阻力包括两部分：第一项是位错攀移临界门槛应力，与施加应力无关；第二项是与施加应力有关的阻力项，代表了其他强化机制的贡献。位错攀移机制蠕变阻力的上限是切割机制门槛应力。在3种铸造镍基高温合金中（定向凝固DZ17G合金，IN100合金和IN738合金），对上述模型进行了验证，理论计算应用了SL强化理论，与实测值符合较好。     

快速凝固Al—Li—Mg—Zr合金粉末粒度对组织和性能影响

研究超音雾化快速凝固Al—Li—Mg—Zr合金粉末粒度对组织和性能的影响中发现,粉末粒度越细,组织越细,合金强度越大;但粒度太细,又会导致塑性变差。试验合金粒度范围选用40—100μm为佳。     

PSO-IIIA(3)亚砜萃取Pt(IV)的机理

研究表明,在酸性介质中,亚砜萃取Pt(Ⅳ)的主要机理为酸性缔合,其萃合物组成为H_2PtCl_6·6H_2O·2PSO。并计算了亚砜萃取Pt(Ⅳ)的萃取平衡常数。     

取向硅钢晶粒取向的不均匀分布及其检测

利用X射线衍射和背散射电子衍射检测了取向硅钢板表层和中心部位的宏观织构和微观晶粒取向分布,观察了相应的晶粒组织。结果表明,二次再结晶不彻底的成品钢板的表面会残留非{110}<001>取向的小晶粒,并影响钢板的软磁性能。取向硅钢板表层的晶粒取向分布能够在一定程度上反映出钢板的质量,因此可以借助X射线表面无损检测技术发展取向硅钢织构的工业在线检测技术。     

CYCLIC DEFORMATION OF COARSE GRAINED POLYCRYSTALLINE PURE Al——Ⅱ.FRACTURE SURFACE MORPHOLOGY

SEM photos for very coarse grained and high ductile polycrystalline pure Al show followingcharacteristics:A few fracture sources are concentrated,the crack propagates in fan-shapenear them,and the fatigue striations are cyclic cleavage facets.Each striation consists of awide cleavage facet and a narrow cleavage stage.Those stages often blunt due to plasticdeformation.The fatigue striations are clear and continual,and distribute over whole zone ofstage Ⅱ crack propagation.Two kinds of fatigue striations form in different levels,areconjoined by a“twisted baked piece of pastry”band.The secondary crack along the fatiguestriations was observed frequently.Some of them have already developed into secondarymacrocracks and secondary fatigue striations were found clearly on secondary fracture sur-face.The fracture surface can be divided into two parts,initiation and propagation zone of thecrack,however,no statical-fracture zone was observed.The mechanism to form striationswas preliminarily discussed.     

DISTRIBUTION AND EFFECT OF Ce IN RE BEARING DUCTILE IRON

The dependence of nodularization of graphite upon Ce content in RE bearing nodular castiron,prepared by directional solidification,has been investigated by electrolyticextraction-radioisotope assay analysis of Ce in each phase of the iron together withmeasurement of nodulized graphite.Results show that the Ce occurs mainly as alloyed form.In the graphite phase,the Ce content is believed to be characterization of nodularization.Thegraphite would completely nodulized only the Ce is over a certain content in graphite phase.     

接触疲劳过程中的诱发相变和冷作硬化SCIEI

研究了三种丝杠钢的接触疲劳性能。利用TEM和背散射Mossbauer谱研究了三种钢在接触疲劳前后的显微组织结构;测量了接触区中心线下显微硬度随层深的变化。结果表明:接触应力诱发A_R→M相变,并导致一定深度的冷作硬化。讨论了诱发相变和冷作硬化对接触疲劳性能的影响。     

MICROSTRUCTURE STUDY OF CONSTITUENT PHASES IN 2024 SERIES Al ALLOYS

X-ray microanalysis,convergent beam electron diffraction(CBD)and selected area electrondiffraction(SAD)studies on the structures and compositions of the constituent phases in2024 series Al alloys have been conducted.Partial substitution of alloying elements is found tooccur in all the constituent phases,which cause small deviations from the stoichiometric com-positions reported in these ternary compounds.The dominant phase is α-Al_(12)(FeMn)_3Si whichhas a body center cubic crystal structure with the Im■ space group and a=1.25 nm.The nextdominant phase is Cu_2FeAl_7 which has a primitive tetragonal crystal structure with theP4/mnc space group and a=0.6336 nm,c=1.487 nm.The minor phase is α'-Al_(12)Fe_3Si hav-ing α primitive cubic crystal structure with the Pm■ space group and α=1.27 nm.