Using correlation coefficients for locating partial discharge in power transformer

Most serious failure of power transformers is due to the insulation breakdown. Partial discharge (PD) that damages insulation by gradual erosion is major source of insulation failure. The effective ability of the wavelet packets analysis as a tool for disk-to-disk partial discharge faults detection and localization in transformer windings is shown in this paper. Techniques for locating a PD source are of the major importance in both the maintenance and repair of a transformer. One of the most well-known methods of PD localization in transformers is based on winding modeling and current of neutral point analysis. Since the impedance between PD location and neutral point of winding depends on the PD location in respect to neutral point, the frequency spectrum of neutral point current varies when the PD location changes. In the other word, the current components of neutral points vary according to the place where PD occurs. So in this paper, detailed model of transformer winding is modeled and the neutral point current is studied for locating PD. The used method is validated by the simulated model of transformer windings. This model produces a very acceptable current when compared to the experimental data. In this paper for locating partial discharge (PD) in transformer windings, a simulated model is developed for the transformer winding and the PD phenomenon mechanism. The impulse current test and wavelet packets transformation are used to locate PD. It is shown that the neutral current measurement of the transformer winding has useful information about PD location.     

Characterization of micromachined silicon rectangular waveguide at 400 GHz

We present the first characterization of a micromachined silicon rectangular waveguide at 400GHz. The silicon waveguide has an average loss of 0.086dB/mm for a range of 350-460GHz. The waveguides are formed using well known microfabrication techniques and demonstrate a successful first step towards the use of silicon waveguides as a viable option for THz systems.     

A quadratic optimization method for connectivity and coverage control in backbone-based wireless networks

The use of directional wireless communications to form flexible mesh backbone networks, which provide broadband connectivity to capacity-limited wireless networks or hosts, promises to circumvent the scalability limitations of traditional homogeneous wireless networks. The main challenge in the design of directional wireless backbone (DWB) networks is to assure backbone network requirements such as coverage and connectivity in a dynamic wireless environment. This paper considers the use of mobility control, as the dynamic reposition of backbone nodes, to provide assured coverage-connectivity in dynamic environments. This paper presents a novel approach to the joint coverage-connectivity optimization problem by formulating it as a quadratic minimization problem. Quadratic cost functions for network coverage and backbone connectivity are defined in terms of the square distance between neighbor nodes, which are related to the actual energy usage of the network system. Our formulation allows the design of self-organized network systems which autonomously achieve energy minimizing configurations driven by local forces exerted on network nodes. The net force on a backbone node is defined as the negative energy gradient at the location of the backbone node. A completely distributed algorithm is presented that allows backbone nodes to adjust their positions based on information about neighbors’ position only. We present initial simulation results that show the effectiveness of our force-based mobility control algorithm to provide network configurations that optimize both network coverage and backbone connectivity in different scenarios. Our algorithm is shown to be adaptive, scalable and self-organized.     

Energy and load balancing routing protocol for IoT

Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods.     

High speed,low power VLSI CMOS vision sensor for geometric centre object tracking

In this article an object tracking CMOS sensor is presented. The architecture incorporates photo detection devices and pixel level processing elements for capturing and processing the image data and extracting the object's coordinates. The edges of the image scene are extracted by in-pixel edge detectors and the region (object) of interest, selected by the user, is segmented using a switch network. Coordinates of the desired region are obtained by extracting the geometric centre of the region. Tracking of the selected object is then performed by automatic reselection of the region using the updated coordinates. The proposed design presents less sensitivity to threshold adjustments than binarisation techniques. The sensor has been designed as a 64 × 64 pixel VLSI CMOS chip in the 0.35 μm standard CMOS technology. The proposed structure is analysed with regard to its operation in the presence of mismatches and noise. Features of the sensor are reported and compared with some previous object tracking designs. Because the power dissipation is small, the chip is ideal for low-power applications.     

Measurements on a 215-GHz subharmonically pumped waveguide mixerusing planar back-to-back air-bridge Schottky diodes

This paper presents design and performance data for a 215-GHz subharmonically pumped waveguide mixer using an antiparallel-pair of planar air-bridge-type GaAs Schottky-barrier diodes. The waveguide design is a prototype for a 640-GHz system and uses split-block rectangular waveguide with a 2:1 width-to-height ratio throughout. The measured mixer noise and conversion loss are below that of the best reported whisker contacted or planar-diode mixers using the subharmonic-pump configuration at this frequency. In addition, the required local oscillator power is as low as 3 mW for the unbiased diode pair, and greater than 34 dB of LO noise suppression is observed. Separate sideband calibration, using a Fabry-Perot filter, indicates that the mixer can be tuned for true double sideband response at an intermediate frequency of 1.5 GHz. Microwave scale model measurements of the waveguide mount impedances are combined with a mixer nonlinear analysis computer program to predict the mixer performance as a function of anode diameter, anode finger inductance, and pad-to-pad fringing capacitance. The computed results are in qualitative agreement with measurements, and indicate that careful optimization of all three diode parameters is necessary to significantly improve the mixer performance     

Nature‐inspired meta‐heuristic algorithms for solving the load balancing problem in the software‐defined network

The growth of the networks has difficult network management. Recently, a concept called software‐defined network (SDN) has been proposed to address this issue, which makes network management more adaptable. Control and forwarding planes are separated in SDN. The control plane is a centralized logical controller that controls the network. The forwarding plane that consists of transfer devices is responsible for transmitting packets. Because the network resources are limited, optimizing the use of resources in the networks is an important issue. Load balancing improves the balanced distribution of loads across multiple resources in order to maximize the reliability and network resources efficiency. SDN controllers can create an optimal load balancing compared to traditional networks because they have a network global view. The load‐balancing problem can be solved using many different nature‐inspired meta‐heuristic techniques because it has the NP‐complete nature. Hence, for solving load balancing problem in SDN, nature‐inspired meta‐heuristic techniques are important methods. However, to the best of our knowledge, there is not a survey or systematic review on studying these matters. Accordingly, in the area of the load balancing in the SDN, this paper reviews systematically the nature‐inspired meta‐heuristic techniques. Also, this study demonstrates advantages and disadvantages regarded of the chosen nature‐inspired meta‐heuristic techniques and considers their algorithms metrics. Moreover, to apply better load balancing techniques in the future, the important challenges of these techniques have been investigated.     

A New Algorithm for the Elimination of Common Subexpressions in Hardware Implementation of Digital Filters by Using Genetic Programming

A new algorithm based on Genetic Programming (GP) for the problem of optimization of Multiple constant Multiplication (MCM) by Common Subexpression Elimination(CSE) is developed. This method is used for hardware optimization for DSP systems. A solution based on Genetic Programming is shown in this paper. The performance of the technique is demonstrated in one- and multi-dimensional digital filters with constant coefficients.     

A rapid smart approach for reliability and failure mode analysis of memories and large systems

This paper presents a novel system simulation methodology based on the known Monte Carlo technique, used for reliability and failure mode analysis of complex and large systems. The presented approach, called “state-merging and assorted random-testing” (SMART), is particularly applicable to systems involving different types of clusters of identical components, and is ideally suited for simulation of huge memories and similar systems. Simulators based on this approach are insensitive to the number of system components, system reliability or the number of associated spares or standby units, and thus they afford an extremely small simulation time compared to the accelerated Monte Carlo simulation time.