Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

Recovery of sensor embedded washing machines using a multi-kanban controlled disassembly line

Product recovery involves the recovery of materials and components from returned or end-of-life products. Disassembly, an element of product recovery, is the systematic separation of an assembly into its components, subassemblies or other groupings. Stricter environmental regulations together with dramatic decrease in natural resources and landfills have increased the importance of disassembly as all product recovery options require some level of disassembly. Due to changes made during the lifetime of a product by customers or service personnel, the number and the version of components prior to disassembly is unknown. Customers may also discriminate between and demand different versions of components. The existence of non-functional components further adds to the uncertainty associated with disassembly yield. Sensors implanted into products during their production can address this uncertainty by providing information on the number, condition and version of components prior to disassembly. In this study, we evaluate the impact of sensor embedded products (SEPs) on the various performance measures of a washing machine (WM) disassembly line controlled by a multi-kanban system, which takes into consideration the highly stochastic behavior of the line while managing material and kanban flows. First, separate design of experiments studies based on orthogonal arrays are performed for conventional products and SEPs. In order to observe the response of each experiment, detailed discrete event simulation (DES) models for both types of products are developed considering the precedence relationships among the components of a WM. Then, pair-wise t-tests are conducted to compare the two cases based on different performance measures. According to the results, SEPs provide significant reductions in all costs (viz., backorder, holding, disassembly, disposal, testing and transportation) while increasing revenue and profit.     

Towards quality requirements via animated formal specifications

Assuring a high quality requirements specification document involves both an early validation process and an increased level of participation. An approach and its supporting environment which combines the benefits of a formal system specification and its subsequent execution via a rapid prototype is reported. The environment assists in the construction, clarification, validation and visualisation of a formal specification. An illustrative case study demonstrates the consequences of assertions about system properties at this early stage of software development. Our approach involves the pragmatic combination of technical benefits of formal systems engineering based techniques with the context‐sensitive notions of increased participation of both developer and user stakeholders to move us closer towards a quality requirements specification document.     

Realization of reconfigurable filtering horn antennas using active frequency selective surfaces for GSM and LTE signal filtering

Herein, it is aimed to design an Active Frequency Selective Surface (AFSS) based high performance reconfigurable filtering antenna (Filtenna). The proposed AFSS unit element is consist of a single PIN diode with a simple microstrip patch design which performance characteristics are varies with the state of the diodes. The proposed unit elements have been used to form an array that is placed at the aperture of a double ridge horn antenna. With the variation in state of diodes, the antenna acts as a Filtenna module to filtering the incoming electromagnetic waves in frequency band of 1.8 to 2.8 GHz. From the experimental results, it is shown that the proposed Filtenna achieves a signal attenuation of 7.3 dBi at 2.1 GHz.     

Inhibitory effects of anethole and eugenol on the growth and toxin production of Aspergillus parasiticus

The antifungal and antiaflatoxigenic activity of anethole and eugenol which are active components of commonly used spices was studied against two strains of Aspergillus parasiticus. Anethole, up to concentration of 400 μg/ml where complete inhibition was observed, delayed growth and reduced mycelial weight but it showed a stimulative effect on the toxin production of both strains. At a concentration of 300 μg/ml, eugenol inhibited the growth of both strains; levels of eugenol below 200 μg/ml enhanced production of aflatoxin particularly by A. parasiticus NRRL 299.     

An evaluation of quality of service characteristics of PACS packet channel

A novel application on the recently emerging wireless Personal Communications Systems (PCS) is the multimedia communication. In this paper, we evaluate multimedia communications capability and quality of service characteristics of one of the PCS standards, Personal Access Communications System's (PACS) packet channel (PPC) using simulation modeling. The performance of PPC's slot aggregation and data-sense multiple access techniques are studied by considering the downlink and uplink in a single cell and combined uplink/downlink in two cells and changing various parameters such as the number of users and certain protocol parameters. Interconnection of PPC with the Internet is discussed next. Frame rates of MPEG-1 coded images transmitted in a PACS cell as IP datagrams are determined. Handover characteristics of PPC downlink are studied by changing different parameters such as the cell size, the speed of the mobile host and time between handovers. The results clearly establish that multimedia communication on PPC is only feasible at lower bandwidths and frame rates and only a few users per cell can be supported. Careful tuning of PPC protocol parameters is required. There is one parameter whose variation gives opposite results on the downlink and uplink.     

Cubic–Quartic Optical Solitons with Differential Group Delay for Kudryashov’s Model by Extended Trial Function

Journal of Communications Technology and Electronics - This paper implements mathematically rigorous extended trial function algorithm to address cubic–quartic optical solitons in...     

Semi-Supervised Deep Learning for Multi-Tissue Segmentation from Multi-Contrast MRI

Journal of Signal Processing Systems - Segmentation of thigh tissues (muscle, fat, inter-muscular adipose tissue (IMAT), bone, and bone marrow) from magnetic resonance imaging (MRI) scans is useful...     

Influence of dry and wet cleaning on the properties of rapid thermal grown and deposited gate dielectrics

Various silicon surface cleaning processes for rapid thermal in-situ polysilicon/ oxide/silicon stacked gate structures have been evaluated. Metal-oxide-semiconductor capacitors were fabricated to assess the effects of cleaning on the quality of gate oxide structures produced by both rapid thermal oxidation (RTO) and rapid thermal chemical vapor deposition (RTCVD). Excellent electrical properties have been achieved for both RTO and RTCVD gate oxides formed on silicon wafers using either an ultraviole/zone (UV/O₃) treatment or a modified RCA clean. On the contrary, poor electrical properties have been observed for RTO and RTCVD gate oxides formed on silicon wafers using a high temperature bake in Ar, H₂, or high vacuum ambient. It has also been found that the electrical properties of the RTCVD gate oxides exhibit less dependence upon cleaning conditions than those of RTO gate oxides. This work demonstrates that initial surface condition prior to gate oxide formation plays an important role in determining the quality of RTO and RTCVD gate oxides.