光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

TEM method for rapid and precise evaluation of continuous recrystallization

With the aid of a double-tilt holder in a transmission electron microscope, a new method for a rapid and precise determination of the misorientations of a large number of subgrain or grain boundaries is given in this article. By use of the method, the continuous recrystallization can be rapidly and precisely evaluated when compared to the other conventional methods.     

Electromagnetics of superconductors

It is shown that a superconductor cannot be simply treated as a low-loss conductor; rather, it should be treated as a negative dielectric material (with a negative dielectric constant). This approach is good only for vanishingly small field application with frequency significantly smaller than gap frequency and temperature not too close to the critical temperature of the superconductor. The electromagnetics of negative dielectric materials are discussed in terms of causality, perturbation technique, surface impedance, time-domain interpretation of current components, and computational electrodynamics     

A subgridding method for the time-domain finite-difference methodto solve Maxwell's equations

A modification to the time-domain finite-difference method (TDFDM) that uses a variable step size is investigated. The entire computational volume is divided into a coarse grid with a large step size. A fine grid with a small step size is introduced only around discontinuities. The corresponding time increments are related to the spatial increments with the same ratio in order to minimize the numerical dispersion. The fields within the coarse and fine grids are found using the TDFDM, while an interpolation in space and time is utilized to calculate the tangential electric field on the coarse-fine grid boundary. This subgridding decreases the required computer memory and therefore expands the capability of the TDFDM. The technique is shown to be numerically stable and does not entail any extra numerical error. The method is applied to the calculation of waveguides and microstrips     

一种基于MPEG-2的立体视频编码中的视差匹配快速算法

高效，快速的视差匹配是立体视频处理中的一项关键技术。本文在分析立体图像序列的视差矢量与运动矢量之间的相关性的基础上，提出一种基于MPEG-2的立体视频编码中的视差匹配快速算法。实验结果表明，与全搜索法相比，在保证重建图像质量的前提下，快速算法能显著降低视差估计的计算复杂度。     

基于新型高速高集成度单片机C8051F060的智能功率柜

简要介绍了智能励磁功率柜的概念及C8051F060单片机的特点 ,详细论述了基于C8051F060的智能励磁功率柜的结构、原理以及与CAN总线通信的实现方法。该控制方案系统集成度高、硬件简单、工作可靠 ,具有很好的推广价值     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

SA299钢冷脆行为的研究

某锅炉厂生产的锅炉汽包,在冬季制造过程中发生破裂,汽包材料为 SA299钢,对断口的初步分析发现为脆性解理断口,据此认为是冷脆破坏。本文依据冷脆特征温度 Tc 的概念对 SA299钢的冷脆行为进行了细致的分析。     

依纳Ⅴ型牵伸机构的优化设计

对细纱机依纳Ⅴ型牵伸机构进行了优化设计，通过在后牵伸区增加一附加压力棒，对牵伸效果有了较大幅度的提高，并对其产生的毛羽增多的弊病采取了有效措施。