Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.     

Détermination des perturbations induites aux extrémités d’une ligne blindée soumise à une excitation ponctuelle de courant

This article allows the determination of the induced perturbations at the ends of the coaxial line in wide frequency band enough. The perturbation source is a current direct point injection into the cable screen in any position. For this, we have applied the theory of the state variables, with foundation of the quasi-TEM approximation, in order to simulate the coaxial line above a ground level that has a finished conductivity. This allows us to supply the current and voltage expressions at the ends of the line as their analytic forms for any conditions of charge. Next, the elaborate objective is to verify experimentally on concrete applications if the test obtained results confirm the theoretical expectations supplied by calculation code finalizing.     

Mechanisms of resistance in a human cell line exposed to sequential topoisomerase poisoning

Camptothecins are a new class of anticancer drugs that target DNA topoisomerase I; current efforts are directed toward elucidating optimal combinations of these drugs with other antineoplastic agents. A rationale for the use of sequential therapy involving the combination of camptothecins with topoisomerase II-targeting drugs, such as etoposide, has arisen from observations of increased topoisomerase II protein levels in cell lines resistant to camptothecin. In an effort to understand potential mechanisms of resistance to this strategy, we developed a U-937 cell subline, denoted RERC, that is capable of surviving exposure to sequential topoisomerase poisoning. The RERC cells are 200-fold resistant to camptothecin, 8-fold resistant to etoposide, and 10-fold hypersensitive to cisplatin compared to the parental U-937 cells. Biochemical analyses indicate that the resistant phenotype involves alterations in both topoisomerase I and topoisomerase IIalpha. Topoisomerase I catalytic activity in the resistant cells is similar to that of the parental line but is resistant to camptothecin. Moreover, the resistant cells express a single mRNA species of topoisomerase I that codes for a mutation in codon 533. In addition, topoisomerase IIalpha protein levels are decreased 10-fold in the resistant line, coincident with a two-fold decrease in the expression of topoisomerase IIalpha mRNA. Collectively, these results indicate that resistance to sequential topoisomerase poisoning may involve a reduction in total cellular topoisomerase activity.     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

Thermodynamic analysis of solar photovoltaic cell systems

The thermodynamic characteristics of solar photovoltaic (PV) cells are investigated from a perspective based on exergy. A new efficiency is developed that is useful in studying PV performance and possible improvements. Exergy analysis is applied to a PV system and its components, and exergy flows, losses and efficiencies are evaluated. Energy efficiency is seen to vary between 7% and 12% during the day. In contrast, exergy efficiencies, which incorporate the second law of thermodynamics and account for solar irradiation exergy values, are lower for electricity generation using the considered PV system, ranging from 2% to 8%. Values of “fill factors” are determined for the system and observed to be similar to values of exergy efficiency.     

Compact WLAN disc antennas

A novel conical beam patch antenna design, suitable for local area network applications, uses a central cylindrical connection from the disc to ground to achieve a large reduction in resonant size. Results on efficiency, bandwidth, and pattern are reported for several prototypes.     

Synthesis and characterization of antioxidants and detergent dispersant based on some polyisobutylene copolymers

Polyisobutylene succinic anhydride-urea/polyamines (PIBSA) copolymers were synthesized as potential antioxidants and detergent dispersant agents for lubricating oils samples (SAE-30). Homogeneity, thermal stability and dispersancy of the solutions were determined. Fully soluble oil compounds that are thermally stable up to 250 °C were achieved. The oxidation stability of lube oil samples in the presence of four designed PIBSA additives (varying in the number of amine groups) was determined for a time period of up to 72 hours. The dependence of the additive efficiency on its concentration was studied to achieve maximum stability. Some PIBSA additives at concentration 3.0 · 10⁴ ppm exhibit the best results. Dispersivity values were measured at predetermined oxidation times. The results proved reliable dispersion capability as the nitrogen content of the additive is increased, i.e. the increase in the basic character of the additive leads to the increase in the neutralization capability. Moreover, the designed PIBSA additives retain their efficiency after long oxidation times, confirming their role as multifunctional nitrogen containing polymeric additive. Electronic Publication     

Biosorption of Phenol onto Posidonia oceanica (L.) Seagrass in Batch System: Equilibrium and Kinetic Modelling

In this research, the biosorption of phenol using the fibres of a Mediterranean seagrass Posidonia oceanica (L.) was studied. Batch experimental procedures were made to investigate the ability of this novel marine biomass to remove phenol from aqueous phase. The influences of pH and contact time at different initial concentrations were evaluated. The results showed that biosorption capacity was enhanced using solution pH equal to 5.2. The modelling results showed that pseudo‐second‐order and Redlich‐Peterson models were found to be the most suitable to satisfactory describe the kinetic and equilibrium adsorption data, respectively.