Value of information in remanufacturing complex products

Remanufacturing facilities usually face a trade-off between limited information about remanufacturing yields and potentially long supplier lead times. To improve production performance, these firms may attempt to acquire more timely and accurate information about remanufacturing yields or alternatively, to reduce the lead times of purchased parts. We develop four decision-making models to evaluate the impact of yield information and supplier lead time on manufacturing costs. We identify the operating conditions under which these capabilities are valuable, along with their relative impact on facility performance. Each model is formulated as an infinite horizon, stochastic dynamic program (Markov decision process). Our results indicate that the yield information is generally quite valuable, while investments in supplier responsiveness provide trivial returns to products with few parts. However, as product complexity increases with large number of target parts, the value of short lead times increases.     

Pyrolysis of Miscanthus Giganteus and wood pellets: TG-FTIR analysis and reaction kinetics

Characterisation of two biomass fuels (pelletised Miscanthus Giganteus and wood) was performed using thermogravimetric analysis with measurement of products by means of Fourier transform infrared spectroscopy (TG-FTIR). Three heating rate profiles were applied (10, 30 and 100 °C/min), with a final temperature of 900 °C. HCN and HNCO were found to be the major N-products, while the NH₃ fraction was detected to a minor extent. Kinetic parameters were obtained from the TG-FTIR results using a model based on parallel first-order reactions with a Gaussian distribution of activation energies. On the basis of the above kinetic analysis and product yields, input files for the functional group-devolatilisation, vaporisation, cross-linking biomass-pyrolysis model were prepared. The fit of model parameters to TG-FTIR product-evolution data was found to be generally good, but the model-predicted yields for some species did not fit experimental data at all heating rates. Further improvements in the model are needed to resolve above difficulty.     

A physiological perspective on the swelling properties of the mammalian corneal stroma.

PURPOSE: The present studies were designed to assess whether measurement of corneal stroma swelling in the laboratory, especially in non-physiological solutions, was associated with a measurable effect on the keratocytes. METHODS: Complete corneal stroma preparations were made from quality- and age-selected recent post-mortem cattle eyes. These were either assessed immediately or incubated in three different solutions, namely a balanced salts solution with glucose (BSSG), isotonic phosphate buffered saline (PBS) or pure water. Incubations were carried out at 37 degrees C for 9h, and repeated measures of wet mass made so that the rates and extent of swelling could be determined. After incubation, an aqueous extract was made of the stroma for measurements of the levels the enzymes lactate dehydrogenase (LDH), aldehyde dehydrogenase (ALDH) and N-acetyl-beta-glucosaminidase. RESULTS: The initial rates of swelling were lowest in BSSG, marginally faster in PBS and much faster in water. The secondary rates of swelling showed the same sequence being 10.0%/h in BSSG, 14.8%/h in PBS and 34.2%/h in water. Compared to non-incubated preparations, reductions in all three enzyme activities occurred. For LDH, these were 15% with BSSG, 40% in PBS and 80% with water. Similar results were seen with ALDH activity when comparing the three incubation solutions, while incubation in BSSG also resulted in a substantial (40%) reduction in N-acetyl-glucosaminidase activity. CONCLUSIONS: When immersed in an isotonic BSSG with added glucose at 37 degrees C, the swelling of a complete bovine corneal stroma is much less than smaller pieces of stroma, and also slightly less than if isotonic PBS was used. With the use of BSSG, little or no change in cytoplasmic enzyme activities occurred, but measurable decreases were noted with PBS and very substantial decreases when water was used, indicating a toxic effect on the keratocytes. The observation that substantial decreases in a lysosomal enzyme activity could occur even with the use of BSSG indicate substantial stress is imposed on the stroma during these types of experiments. Notwithstanding, the data collectively indicate that the keratocyte cells within the collagen matrix of the stroma can be substantially damaged and this needs to be taken into account in future experiments on the true physiology of the corneal stroma.     

Enhancing both network and user performance for networks supporting best effort traffic

With a view on improving user-perceived performance on networks supporting best effort flows, e.g., multimedia/data file transfers, we propose a family of bandwidth allocation criteria that depends on the residual work of on-going transfers. Analysis and simulations show that allocating bandwidth in this fashion can significantly improve the user-perceived delay, bit transmission delay, and throughput over traditional approaches, e.g., by 58% on an 80% loaded linear network. A simple implementation based on TCP Reno, exemplifies how one might approach practically realizing such gains. We discuss several other advantages of incorporating such differentiation at the transport level. In particular we make the case that favoring small transfers combined with user impatience or peak rate constraints, both of which are natural mechanisms for users to express the utility of completing transfers, offers a lightweight approach to achieving good overall network goodput and/or utility for best effort networks.     

Application of novel extractants for actinide(III)/ lanthanide(III) separation in hollow-fibre modules

Separation tests using hollow-fibre modules were performed for the difficult selective extraction of trivalent actinides over fission lanthanides from acidic media. This article shows that with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant, up to 94% americium could be extracted from 1.0 kmol/m³ HNO₃, with minimal lanthanide co-extraction. Using a synergistic mixture of bis(chlorophenyl)dithiophosphinic acid and tri-n-octyl phosphine oxide, tests were performed on extraction, lanthanide scrubbing and stripping. In the extraction test, up to 99.99% americium could be extracted from 0.5 kmol/m³ HNO₃, with approximately one third of the lanthanides being co-extracted. Mass transfer calculations using a consistent set of input data showed good agreement with the experiments.     

Efficiency improvements in US office equipment: Expected policy impacts and uncertainties

We create a business as usual scenario for office equipment electricity use from industry forecasts of equipment sales, surveys of equipment densities by building type, measured data on wattage and usage by equipment type and projected lifetimes for equipment. We then calculate electricity used by building type and equipment type for Energy Star and advanced scenarios and explore the sensitivity of these results to variations in key input parameters. According to our analysis, the Energy Star programme will save the US almost US$1 billion annually starting in the year 2000, with minimal expenditure of public funds.     

A comparison of CCS tandem overload controls

In this paper we analyse issues associated with overloads in tandem switching systems in Common Channel Signalling (CCS) networks. In particular, we examine the need for, and effectiveness of, Automatic Congestion Control (ACC), a CCS mechanism which allows a congested switching system to inform adjacent CCS nodes of its level of overload, and subsequently controls the rate at which traffic is sent to the congested node. We demonstrate the critical need for end-offices and tandem switching systems to implement some form of ACC if network performance is to be maintained during congestion, especially in tandem exchanges. In addition, we find that the presently defined ACC should be expanded to allow more levels of congestion to be reported to adjacent nodes, so that a more effective, finer grained control is produced.     

Mullite Formation by Endothermic Reaction of α-Alumina/Silica Microcomposite Particles

The formation of mullite was investigated using microcomposite powders which consist of α-alumina cores and amorphous silica coatings. Differential thermal analysis and X-ray diffraction showed that the mullitization reaction was endothermic. In contrast, mullite forms exothermically in samples prepared by sol-gel processing. The results are shown to be consistent with available thermodynamic data for mullite formation from different alumina and silica phases.     

Frequency of molecular alterations in heterozygous beta-thalassemia in southern Spain and their relation to the hematologic phenotype

INTRODUCTION: Heterozygous beta-thalassemia manifests hematologically with microcytosis, reduced red blood cell hemoglobin concentration and high hemoglobin A2 levels. Almost all molecular alterations are due to point mutations. We attempt to determinate the frequency of that mutations in the Oriental Andalusia Area, and its relationship with the hematological phenotype. PATIENTS AND METHODS: We have studied 45 heterozygous patients. DNA samples were amplified by PCR, using the printers CD7 and HI1. A 16 Kb fragment corresponding to beta globin gene was obtained and analyzed by Dot Blot assay and hybridized with allelic specific oligonucleotide (ASO) probes to detect the 6 more frequent mutations found in the South of Spain. RESULTS: Codon 39 nonsense mutation (31.1%) was the most frequent finding followed by IVS-1 NT 110 (26.7%). The relationship between hematological parameters and molecular mutations concluded that IVS-I NT 6 mutation developed a minimal anemia. DISCUSSION: From the practical point of view, this study indicates that we were able to detect more than 90% of heterozygous beta-tal. with 5 out of 6 ASO probes used in this work. Thus, our data also provides a further implication in prenatal diagnosis.