Improvement strategy for edge waviness in roll bending process of corrugated sheet metals

This paper focuses on the corrugated thin-walled sheet metal in the roll bending process. The main defect that appears in corrugated panels subjected to high amounts of bending deformation is a wavy edge. Edge defects are caused by excessive longitudinal stress and strain near the edge of the plate, and local edge buckling may occur when some critical value of the bending radius is exceeded. This paper proposes two different approaches to avoid a wavy edge for a formed panel: excessive stress on the edge region is restrained by controlling the length of the cross-sectional end of the corrugated panel while considering the stress distribution, and the bending radius in each forming step is determined by considering the strain limit at which the initial edge waviness occurs to avoid excessive compression at particular steps. The experimental and numerical results indicated that the two proposed design strategies can minimize wavy edges in the formed shape.     

Improvement of the expression level of β-glucosidase from Agrobacterium sp. in Escherichia coli by rare codon optimization

To achieve high level expression of β-glucosidase from Agrobacterium sp. (Abg) in an Escherichia coli expression system, 6 rare codons at +3, +11, +158, +308, +314, and +318 of abg gene were replaced with favored codons using site-directed mutagenesis. The rare codon replacements of +3 (CCC) and +11 (CCC) positions enhanced the expression level of Abg by 2- and 3.6-fold, respectively. The double mutant, Abg-DM, where both of +3 and +11 rare codon positions were modified showed a 5.2-fold higher expression level than the original abg gene. Circular dichroism (CD) spectra of the over-expressed Abg and original Abg enzymes were identical, indicating that Abg was properly folded during over-expression.     

The novel usage of spectroscopic ellipsometry for the development of amorphous Si solar cells

We present the novel use of spectroscopic ellipsometry (SE) for the development of a-Si:H solar cell. SE is a very fast and useful tool to measure various optical properties of thin film. In the case of a-Si:H thin film analysis, generally, SE is used to estimate the film thickness, roughness, void fraction, optical constants such as (n,k), and so forth. In this study, optical parameters from SE measurements were analyzed with relation to structural and electrical properties of a-Si:H thin film for solar cell. By analyzing IR absorption spectra and conductivity measurements, it was affirmed that <ε₂> and parameter A by Tauc-Lorentz model fitting of SE data are representative parameters qualifying a-Si:H thin film, and that they have close relationships with FF and light induced degradation property of solar cells. Based on the analysis, solar cells that have i-layers with various E_g were optimized. By this research, easier and faster methodology to develop a-Si:H thin film for thin film Si solar cells using SE measurements was established.     

Effect of Time-Dependent Pinning Pressure on Abnormal Grain Growth: Phase Field Simulation

The effect of the time-dependent pinning pressure of precipitates on abnormal grain growth has been investigated by multiphase field simulation with a simple precipitation model. The application of constant pinning pressure is problematic because it always induces abnormal grain growth or no grain growth, which is not reasonable considering the real situation. To produce time-dependent pinning pressure, both precipitation kinetics and precipitate coarsening kinetics have been considered with two rates: slow and fast. The results show that abnormal grain growth is suppressed at the slow precipitation rate. At the slow precipitation rate, the overall grain growth caused by the low pinning pressure in the early stage indeed plays a role in preventing abnormal grain growth by reducing the mobility advantage of abnormal grains. In addition, the fast precipitate coarsening rate tends to more quickly transform abnormal grain growth into normal grain growth by inducing the active growth of grains adjacent to the abnormal grains in the early stage. Therefore, the present study demonstrates that the time dependence of the pinning pressure of precipitates is a critical factor that determines the grain growth mode.     

Metal binding novel flaxseed peptides (linusorbs)

Linusorbs (LOs; a.k.a. cyclolinopeptides) are naturally occurring orbitides derived from flaxseed. These compounds consist of 8–10 amino acid residues, which are linked via an N ‐ to C‐terminal peptide bond with molecular masses of approximately 1 kDa. The LO circular structure makes them candidates for metal binding studies. Flaxseed extracts are known to suppress Pb and Cd toxicity. Hence, four metal salts surveyed include Zn(CH₃COO)₂, ZnSO₄, Pb(CH₃COO)₂ and Cd(NO₃)₂ with pure LOs 1–5 . Proton NMR spectra indicated interaction of LOs with metal salts in solution and were used to determine impacts of methionine oxidation on interactions with metal ions. The methyl group of methionine S,S ‐ dioxide of related LOs did not show the same shift in the presence of Zn(CH₃COO)₂ and Pb(CH₃COO)₂ observed in their methionine S ‐ oxide analogues. Metal complexes were observed forming at 10^?2 m to 10^?4 m but not at lower concentrations (10^?5 m to 10^?8 m ). Mass spectrometry data confirmed that metal binding strength varied by metal in the order Zn(CH₃COO)₂<Pb(CH₃COO)₂<ZnSO₄<Cd(NO₃)₂.     

Estimating Clock Uncertainty for Efficient Duty-Cycling in Sensor Networks

Radio duty cycling has received significant attention in sensor networking literature, particularly in the form of protocols for medium access control and topology management. While many protocols have claimed to achieve significant duty-cycling benefits in theory and simulation, these benefits have often not translated into practice. The dominant factor that prevents the optimal usage of the radio in real deployment settings is time uncertainty between sensor nodes which results in overhead in the form of long packet preambles, guard bands, and excessive control packets for synchronization. This paper proposes an uncertainty-driven approach to duty-cycling, where a model of long-term clock drift is used to minimize the duty-cycling overhead. First, we use long-term empirical measurements to evaluate and analyze in-depth the interplay between three key parameters that influence long-term synchronization: synchronization rate, history of past synchronization beacons, and the estimation scheme. Second, we use this measurement-based study to design a rate-adaptive, energy-efficient long-term time synchronization algorithm that can adapt to changing clock drift and environmental conditions, while achieving application-specific precision with very high probability. Finally, we integrate our uncertainty-driven time synchronization scheme with the BMAC medium access control protocol, and demonstrate one to two orders of magnitude reduction in transmission energy consumption with negligible impact on packet loss rate.     

Thermal conductivity and mechanical properties of various cross-section types carbon fiber-reinforced composites

In this work, to study the characteristics of carbon fiber-reinforced composites with different fiber cross-section types, such as round, C, and hollow-shape, the thermal conductivity and mechanical properties were investigated and compared. The thermal conductivity was measured by means of steady-state method to the parallel and perpendicular direction of reinforcing fibers. The mechanical properties were evaluated by a variety of test methods i.e., flexural, interlaminar shear strength, and impact strength. As a result, it was found that the thermal conductivity was greatly depended on the cross-section type of the reinforcing fibers, as well as, the reinforcing orientation. Especially, the anisotropy factor (k _///k ) and the thermal diffusivity factor (_///) of C and hollow-type carbon fiber-reinforced composites showed about two times higher values than those of round-type one. Also, the mechanical results showed that C and hollow-type carbon fibers-reinforced composites had higher values than those of round-type one in all mechanical tested. These results were probably due to the basic properties of non-circular (C and hollow-type) carbon fiber which can improve interfacial binding forces and widen interfacial contact area between reinforcement and matrix, resulting in effectively transferring the applied stress.     

Mixed Dimensional Coupling in Finite Element Stress Analysis

Many analysis models utilize finite elements of reduced dimension. However, to capture stress concentrations at local details, it would be desirable to combine the reduced dimensional element types with higher dimensional elements in a single finite element model. It is therefore important in such cases to integrate into the analyses some scheme for coupling the element types that conforms to the governing equations of the problem. In this paper, a novel method that can correctly couple beams to solids, beams to shells and shells to solids for elastic problems is presented. The approach adopted is to equate the work done on either side of the interface between dimensions, and this leads to multi-point constraint equations, thus providing a relationship among nodal degrees of freedom between the differing element types. Example results show that the proposed technique does not introduce any spurious stresses at the dimensional interfaces. ID="A1" Correspondence and offprint requests to: C. G. Armstrong, School of Mechanical and Manufacturing Engineering, The Queen's University of Belfast, Ashby Building, Stranmillis Road, Belfast BT9 5AH, Northern Ireland. E-mail: c.armstrong@qub.ac.uk     

Short communication: lack of stage-specific embryonic antigen-1 expression by bovine embryos and primordial germ cells

The objective of this study was to determine whether stage-specific embryonic antigen-1, a cellular marker commonly used to identify murine undifferentiated embryonic cells, is also a useful marker for bovine pluripotent cells. Expression of stage-specific embryonic antigen-1 was examined by indirect immunohistochemistry on bovine preimplantation embryos and on primordial germ cells contained in the genital ridge. Expression of stage-specific embryonic antigen-1 was not observed in any of the cleavage-stage bovine embryos examined, including one-cell, two-cell, four-cell, eight-cell, morula, and blastocyst stages, nor in tissue sections of bovine genital ridges collected from embryos on d 34, 37, and 40 of gestation. As expected, expression of stage-specific embryonic antigen-1 was detected on murine preimplantation embryos and on murine teratocarcinoma cells. Results of this study indicate that, unlike in the mouse, stage-specific embryonic antigen-1 is not a useful cellular marker for pluripotent bovine embryonic cells or bovine primordial germ cells.