Reconfigurable Optical Add‐Drop Multiplexer Using a Polymer Integrated Photonic Lightwave Circuit

We have developed a fully functional reconfigurable optical add‐drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10‐channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40‐channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C‐band 40‐channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40‐channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.     

Writing current reduction and total set resistance analysis in PRAM

We evaluated the limit of scaling bottom electrode contact (BEC) heater size and high resistivity heater to reduce writing current. It was found that the resistivity of heater should be increased for reducing writing current below the heater size of about 50 nm without any undesirable increase of resistance of the crystalline state (SET state, Rset). It was shown in the numerical simulations that the dissipated heat loss through BEC during melting GST was decreased in the increase of resistivity of heater. In addition, we analyzed the resistance components contributing to the total set resistance. It was observed that the undesired sharp increase of Rset as the BEC size decreases below 50 nm was attributed to the resistance component of GST–BEC interface. In the case of high resistivity heater, the contributions of both incomplete crystallization and heater itself were enhanced.     

Photoinduced Magnetization with a High Curie Temperature and a Large Coercive Field in a Co‐W Bimetallic Assembly

The crystal structure, magnetic properties, and temperature‐ and photoinduced phase transition of [{Co^II(4‐methylpyridine)(pyrimidine)}₂{Co^II(H₂O)₂}{W^V(CN)₈}₂]·4H₂O are described. In this compound, a temperature‐induced phase transition from the Co^II (S = 3/2)‐NC‐W^V(S = 1/2) [high‐temperature (HT)] phase to the Co^III(S = 0)‐NC‐W^IV(S = 0) [low temperature (LT)] phase is observed due to a charge‐transfer‐induced spin transition. When the LT phase is irradiated with 785 nm light, ferromagnetism with a high Curie temperature (T_C) of 48 K and a gigantic magnetic coercive field (H_c) of 27 000 Oe are observed. These T_C and H_c values are the highest in photoinduced magnetization systems. The LT phase is optically converted to the photoinduced phase, which has a similar valence state as the HT phase due to the optically induced charge‐transfer‐induced spin transition.     

Partial relaying with layered encoding for efficient multi-hop transmission

Multi-hop transmission through wireless relays provides coverage extension and throughput enhancement. However, it may cause waste of bandwidth to meet half-duplex requirement of the relay. Motivated by this problem, we propose an efficient relaying scheme, referred to as partial relaying with layered encoding. In the proposed scheme, only partial information is transmitted via a relay, and a layered encoding is employed for the link between the source and relay for reliable delivery of the partial information. Simulation results confirm that the proposed scheme outperforms the conventional decode-and-forward relaying scheme, in terms of both the spectral efficiency and bit error rate.     

Evolved broadcast scheduling mechanism supporting energy conserving e-MBMS transmission

This study designed a data broadcasting method called evolved broadcast scheduling algorithm (eBSA) to further support LTE evolved multimedia broadcast/multicast services (e-MBMS). This eBSA provides new scheduling technology for e-MBMS and a new information searching method for user equipments that simultaneously conserves user equipment energy and maintains favorable access latency of broadcast messages. The eBSA constructs index and message channels based on the message popularities, using the index channel to guide user equipments to rapidly locate the position of the desired message in the message channel. Consequently, a short mean access time and mean turning time can be attained. The results of numerical analysis verify that when access messages possess skewed access characteristics, the proposed eBSA method performs exceptionally. Additionally, by adequately adjusting the parameter provided by the eBSA method, the optimal tradeoff between energy conservation and access latency performance can be attained.     

Fabrication and characterization of CdTe nano pattern on flexible substrates by nano imprinting and electrodeposition

Nano imprinting technology and the electrodeposition method were applied to make CdTe nano patterns on flexible substrates. An ammonia based aqueous solution was prepared at pH 10.7 and indium tin oxide (ITO)/polyethylene naphthalate (PEN) film with template was used as the working electrode. ITO thin film which was coated on PEN film had good electrical conductivity and optical transmittance. The template was manufactured by nano imprinting technology on ITO/PEN film. It was made from benzyl methacrylate and had nano rod arrays. It was used as the working electrode and for making CdTe nano pattern. CdTe nano pattern were analyzed by X-ray diffractometer, dual beam (DB)-focused ion beam (FIB)-scanning electron microscopy (SEM), Raman spectroscopy, and ultraviolet (UV)-visible (VIS) spectroscopy. The structure and optical properties of CdTe nano pattern on flexible substrates was analyzed. The crystalline size of nano pattern had 8.26 nm. The Te particles that were precipitated on CdTe surface seems to be exist. The absence of annealing process influenced to have low absorption coefficient and narrow band gap compared to bulk CdTe. However, nano pattern increased reflectance.     

Virtual Fiber Configuration for Dynamic Lightpath Establishment in Large-scaled Optical Networks

Recently, progress has been made in the Generalized Multi-Protocol Label Switching (GMPLS) and Automatic Switched Optical Networks (ASON) standardizations. These technologies realize construction of large-scaled optical networks, interconnections among single-domain Wavelength Division Multiplexing (WDM) networks, and direct communication over multi-domain WDM networks. Meanwhile, it is known that the topology of the Internet exhibits the power-law attribute. Since the topology of the Internet, which is constructed by interconnecting ASs, exhibits the power-law, there is a possibility that large-scale WDM networks, which are constructed by interconnecting WDM networks, will also exhibit the power-law attribute. One of the structural properties of a topology that adheres to the power-law is that most nodes have just a few links, although some have a tremendous number of them. Another property is that the average distance between nodes is smaller than in a mesh-like network. A natural question is how such a structural property performs in WDM networks. In this paper, we first investigate the property of the power-law attribute of physical topologies for WDM networks. We compare the performance of WDM networks with mesh-like and power-law topologies, and show that links connected to high-degree nodes are bottlenecks in power-law topologies. To relax this, we introduce a concept of virtual fiber, which consists of two or more fibers, and propose its configuration method to utilize wavelength resources more effectively. We compare performances of power-law networks with and without our method by computer simulations. The results show that our method reduces the blocking probabilities by more than one order of magnitude.     

SOA-based regenerative amplification of phase-noise-degraded DPSK signals: dynamic analysis and demonstration

A theoretical analysis and an experimental demonstration of semiconductor optical amplifier (SOA)-based regenerative amplification (SORA) of phase noise (PN)-degraded return-to-zero (RZ) differential phase-shift keying (DPSK) signals are presented. The Q-factor improvement is 1.6 dB in single-channel and about 0.8 dB in two non-demultiplexed-channel regimes. The key physical mechanism that enables regeneration by the SORA is the discriminative gain provided by the SOA for the logical 0s versus the logical 1s when two mutually antisymmetric ON-OFF keying (OOK) data trains, created by the DPSK signal, collide in the SOA. The modeling results agree with the experiment.