Quasi-static compressive behaviour of aluminium cenosphere syntactic foams

In this paper, cenosphere particles embedded in AA2014 aluminium matrix are used to fabricate syntactic foam by stir casting method. The particle size is about 100?µm and foam density is about 1990?kg?m^?3. Compression tests at strain rate 0.001/s are performed on foam samples to characterise their mechanical properties which are then used in numerical analysis on commercial finite element analysis software ABAQUS/CAE with isotropic elastic-plastic material model. Experimental and numerical results show good conformity in deformation behaviour with elastic and plateau zones showing average deviations less than 5% and 20%, respectively. Foams showed high yield stress and energy absorption capabilities that can be useful in making blast and impact resistant structures.     

Studies on influence of hydrogen and carbon monoxide concentration on reduction progression behavior of molybdenum oxide catalyst

Temperature programmed reduction (TPR) analysis was applied to investigate the chemical reduction progression behavior of molybdenum oxide (MoO₃) catalyst. The composition and morphology of the reduced phases were characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). The reduction progression of MoO₃ catalyst was attained with different reductant types and concentration (10% H₂/N₂, 10% and 20% CO/N₂ (%, v/v)). Two different modes of reduction process were applied. The first approach of reduction involved non-isothermal mode reduction up to 700 °C, while the second approach of reduction involved the isothermal mode reduction for 60 min at 700 °C. Hydrogen temperature programmed reduction (H₂-TPR) results showed the reduction progression of three-stage reduction of MoO₃ (Mo⁶⁺ → Mo⁵⁺ → Mo⁴⁺ → Mo⁰) with Mo⁵⁺ and Mo⁴⁺. XRD analysis confirmed the formation of Mo₄O₁₁ phase as an intermediate phase followed by MoO₂ phase. After 60 min of isothermal reduction, peaks of metallic molybdenum (Mo) appeared. Whereas, FESEM analysis showed porous crater-like structure on the surface cracks of MoO₂ layer which led to the growth of Mo phase. Meanwhile, the reduction of MoO₃ catalyst in 10% carbon monoxide (CO) showed the formation of unstable intermediate phase of Mo₉O₂₆ at the early stage of reduction. Furthermore, by increasing 20% CO led to the carburization of MoO₂ phase, resulted in the formation of Mo₂C rather than the formation of metallic Mo, as confirmed by XPS analysis. Therefore, the presented study shows that hydrogen gave better reducibility due to smaller molecular size, which contributed to high diffusion rate and achieved deeper penetration into the MoO₃ catalyst compared to carbon monoxide reductant. Hence, the reduction of MoO₃ in carbon monoxide atmosphere promoted the formation of Mo₂C which was in agreement with the thermodynamic assessment.     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

An epidemiologic, clinical, and therapeutic study of childhood Guillain-Barré syndrome in Kuwait: is it related to the oral polio vaccine?

We studied Guillain-Barré syndrome, affecting children 12 years old or less, throughout Kuwait, in the period between January 1, 1992, and March 31, 1997. Nineteen children had the diagnostic criteria of Guillain-Barré syndrome, with an overall annual incidence rate of 0.95/100,000 population at risk. Female patients outnumbered male patients with a sex ratio of 1.4:1. There was a clustering of cases in winter and spring and in the year 1996. The disease symptoms were relatively severe in our patients because only 16% (3 of 19) of them were able to walk at the height of their illness, whereas the rest were bed or chair bound or needed assisted ventilation. Two patients had the electrodiagnostic features of axonal neuropathy and both had residual deficits on follow-up, whereas the rest recovered fully. All the patients received intravenous immunoglobulin. The mean time to walk unaided was 23.5 days (range, 2-84 days) after intravenous immunoglobulin and excluding the two patients with axonal neuropathy, and full recovery was achieved in a mean time of 103 days (range, 30-300 days). Contrary to previous studies, we found no correlation between oral polio vaccine administration and Guillain-Barré syndrome in 2 successive years (1995 and 1996) during a nationwide campaign targeting children less than 5 years old.     

Transplantation for end stage liver disease related to alpha 1 antitrypsin

Alpha 1 antitrypsin deficiency (AT) is an autosomal recessive disease associated with chronic liver disease in adults and children and emphysema in adults. The disease is one of the most common inherited disorders of the Caucasian population of North Europe and North America and is the most common genetic reason for pediatric orthotopic liver transplantation (OLTx), although it is a rare indication in adults. The natural history of the disease is unpredictable and the pathogenesis of the liver injury unclear. Thirty-five patients with histologically apparent alpha 1 AT accumulation in the liver (22 adults, 13 children) have been transplanted in this center. Clinical features were correlated with the pretransplant phenotype, serum alpha 1 antitrypsin levels and potential precipitating factors. All children were PiZZ homozygotes, most of whom had presented with neonatal hepatitis. The majority of adult patients were heterozygotes presenting with portal hypertension and liver cirrhosis. Current one-year posttransplant survival figures are 73% for adults and 87.5% for children. Replacement of the cirrhotic liver results in acquisition of the donor phenotype, a rise in serum levels of alpha 1 antitrypsin, and apparent prevention of associated disease.     

High speed p-type SiGe modulation-doped field-effect transistors

We report on the fabrication and characterization of high-speed p-type modulation-doped field-effect transistors (MODFETs) with 0.7-μm and 1-μm gate-lengths having unity current-gain cut-off frequencies (f_T) of 9.5 GHz and 5.3 GHz, respectively. The devices were fabricated on a high hole mobility SiGe heterostructure grown by ultra-high-vacuum chemical vapor deposition (UHV-CVD). The dc maximum extrinsic transconductance (g_m) is 105 mS/mm (205 mS/mm) at room temperature (77 K) for the 0.7-μm gate length devices. The fabricated devices show good pinch-off characteristics and have a very low gate leakage current of a few μA/mm at room temperature and a few nA/mm at 77 K     

High performance analog VLSI computational circuits

Simple linear voltage/current-controlled voltage-to-current (V-T) converters, which are to first-order insensitive to the threshold voltage variation, are introduced. The circuits can be used as basic building blocks to construct simple analog computational circuits, which can perform functions such as square rooting, squaring, multiplication, sum of squares, difference of squares, etc. Some of the key features are: good linearity, floating inputs [high common-mode rejection ratio (CMRR)], simplicity, and good transconductance tuning range. The circuits can be realized with CMOS devices in saturation, however, BiCMOS devices extend their speed and input voltage range. Realistic simulations and experimental results clearly demonstrate the claims     

Link budget analysis for multistandard receiver architectures

As devices shrink, creating integrated circuits (ICs) that work with the required accuracy becomes more difficult due to issues related to device physics. Receivers are part of an area referred to as "mixed-signal design," meaning that both analog and digital circuitry will be on the same IC. This too presents many challenging issues, as the analog circuitry is highly sensitive to disruptions caused by the noisy digital circuitry. Therefore, accurate modeling and simulation is crucial in the design of wireless receivers to ensure the best possible operation of the fabricated IC. Through simulation and modeling a designer can determine if receiver architecture will meet the required specifications and pinpoint the possible problems before valuable time is spent developing the actual circuit. This article will present design issues for multistandard wireless receivers to give the reader an understanding of the challenges involved in link-budget analysis. TITAN (Toolbox for Integrated Transceiver Analysis), a link-budget analysis tool developed at The Ohio State University Analog VLSI Laboratory, will be presented as an example of a tool for receiver simulation. To determine design performance, various requirements must be translated to model parameters. Among the requirements for receivers are noise floor (NF), second- and third-order distortion (IP2 and IP3, respectively), reciprocal mixing, and phase noise. TITAN offers a graphical interface and encapsulated models to the designer, eliminating the possibility of formula corruption. The interface provides a more intuitive and sophisticated way of setting up the simulation and provides the designer with more readable results. Additionally, a blocking profile component allows the architecture to be tested across multiple standards.     

Statistical modeling of device mismatch for analog MOS integratedcircuits

A generalized parameter-level statistical model, called statistical MOS (SMOS), capable of generating statistically significant model decks from intra- and inter-die parameter statistics is described. Calculated model decks preserve the inherent correlations between model parameters while accounting for the dependence of parameter variance on device separation distance and device area. Using a Monte Carlo approach to parameter sampling, circuit output means and standard deviations can be simulated. Incorporated in a CAD environment, these modeling algorithms will provide the analog circuit designer with a method to determine the effect of both circuit layout and device sizing on circuit output variance. Test chips have been fabricated from two different fabrication processes to extract statistical information required by the model. Experimental and simulation results for two analog subcircuits are compared to verify the statistical modeling algorithms