A quadratic spline approximation using detail multi-layer for soft shadow generation in augmented reality

Implementation of shadows is crucial to enhancement of images in AR environments. Without shadows, virtual objects would look floating over the scene resulting in unrealistic rendering of AR environments. Casting hard shadows would provide only spatial information while soft shadows help improve realism of AR environments. Several algorithms have been proposed to render realistic shadows which often incurred high computational costs. Little attention has been directed towards the balanced trade-off between shadow quality and computational costs. In this study, two approaches are proposed: Quadratic Spline Interpolation (QSI) to soften the outline of the shadow and Detail Multi-Layer (DML) technique to optimize the volume of computations for the generation of soft shadows based on real light sources. QSI estimates boarder hard shadow samples while DML involves three main phases: real light sources estimation, soft shadow production and reduction of the complexity of 3-Dimensional objects’ shadows. To be more precise, a reflective hemisphere is used to capture real light and to create an environment map. The Median Cut algorithm is implemented to locate the direction of real light sources on the environment map. Subsequently, the original hard shadows are retrieved and a sample of multilayer hard shadows is produced where each layer has its unique size and colour. These layers overlap to produce soft shadows based on the real light sources’ directions. Finally, the Level of Details (LOD) algorithm is implemented to increase the efficiency of soft shadows by decreasing the complexity of vertex transformations. The proposed technique is tested using three samples of multilayer hard shadows with varying numbers of light sources generated from the Median Cut algorithm. The experimental results show that the proposed technique successfully produces realistic soft shadows at low computational costs.     

Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

Morphological characteristics of copper deposition on stainless steel cathodes

The results of a metallographic study of cathodic copper deposition on 316 stainless steel are presented. In magnetically assisted d.c. electrolysis, characteristic screen-type deposition patterns are observed. Simultaneous hydrogen evolution causes tunnel-type deposits at 30–45° to the horizontal.Nomenclature B _z magnetic flux density, vertical field lines pointing downwards - C electrolyte concentration - CVD cell voltage drop - i _c cathode current density - s cathode-anode separation distance - T temperature - t _e length of electrolysis time     

Modification of oil palm empty fruit bunches with maleic anhydride: The effect on the tensile and dimensional stability properties of empty fruit bunch/polypropylene composites

Oil palm empty fruit bunch (EFB)‐filled polypropylene (PP) composites were produced. The EFB filler was chemically modified with maleic anhydride (MAH). The effects of the filler size and chemical modification of EFBs on the tensile and dimensional stability properties of EFB–PP composites were studied. The composites with MAH‐treated EFBs showed higher tensile strengths than those with untreated EFBs. This was attributed to the enhanced compatibility between the MAH‐treated EFBs and PP matrix, as shown in a scanning electron microscopy study. Fourier transform infrared analysis showed evidence of C?C and C?O bonds from MAH at 1630 and 1730 cm^?1, respectively. The MAH‐treated PP composites showed lower water absorption and thickness swelling than those with untreated EFBs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 827–835, 2003     

Crystallization and melting behavior of blends comprising poly(3‐hydroxy butyrate‐co‐3‐hydroxy valerate) and poly(ethylene oxide)

Blends of poly(3‐hydroxy butyrate‐co‐3‐hydroxy valerate) (PHBV) and poly(ethylene oxide) (PEO) were prepared by casting from chloroform solutions. Crystallization kinetics and melting behavior of blends have been studied by differential scanning calorimetry and optical polarizing microscopy. Experimental results reveal that the constituents are miscible in the amorphous state. They form separated crystal structures in the solid state. Crystallization behavior of the blends was studied under isothermal and nonisothermal conditions. Owing to the large difference in melting temperatures, the constituents crystallize consecutively in blends; however, the process is affected by the respective second component. PHBV crystallizes from the amorphous mixture of the constituents, at temperatures where the PEO remains in the molten state. PEO, on the other hand, is surrounded during its crystallization process by crystalline PHBV regions. The degree of crystallinity in the blends stays constant for PHBV and decreases slightly for PEO, with ascending PHBV content. The rate of crystallization of PHBV decreases in blends as compared to the neat polymer. The opposite behavior is observed for PEO. Nonisothermal crystallization is discussed in terms of a quasi‐isothermal approach. Qualitatively, the results show the same tendencies as under isothermal conditions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2776–2783, 2006     

Rheological properties of poly(vinyl chloride) / epoxidized natural rubber blends. Part II: The effect of processing variables

The effect of processing variables on the rheological properties of PVC/ENR blends was investigated. The role of crosslinking in determining the flow behavior of blends was also examined by means of dynamically cured blends. It was found that PVC/ENR blends yield melts that are power law fluids. The flow of the melts improves with an increase in temperature and shear rate. However, the introduction of crosslinks reverses this trend, although under more rigorous conditions, the influence of crosslinks is superseded, and subsequently, flow becomes shear rate and temperature dependent. PVC/ENR systems also manifested elastic phenomena. The dependence of the elastic phenomena such as die swell and melt fracture on L/D ratio of the die was demonstrated.     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

On ℤ2ℤ2[u]-additive codes

In this paper, a new class of additive codes which is referred to as ?₂ ?₂[u]-additive codes is introduced. This is a generalization towards another direction of recently introduced ?₂ ?₄-additive codes [J. Borges, C. Fernández-Córdoba, J. Pujol, J. Rif´a, and M. Villanueva, ?₂ ?₄-linear codes: Generator matrices and duality, Designs Codes Cryptogr. 54(2) (2010), pp. 167–179]. ?₂ ?₄-additive codes have shown to provide a promising class of codes with their algebraic structure and applications such as steganography. The standard generator matrices are established and by introducing orthogonality the parity-check matrices are also obtained. A MacWilliams-type identity that relates the weight enumerator of a code with its dual is proved. Furthermore, a Gray map that maps these codes to binary codes is defined and some examples of optimal codes which are the binary Gray images of ?₂ ?₂[u]-additive codes are presented.