Efficient data management and control over WSNs using SDN‐enabled aerial networks

The recent developments in collaborative search, acquisition, and tracking have hoisted the geographical barrier. The network between unmanned aerial vehicles (UAVs) and wireless sensor networks (WSNs) is one such collaboration, which comprises battery‐powered static sensor nodes that act as sources and sinks and UAVs that act as relays. This collaborative network presents with opportunities and advantages, but at the same time, configuration of such networks is an arduous task. The WSN nodes are characterized by constant depleting power. Their network itself requires constant management and reconfiguration. These requisites can be slaked through the formation of an efficient data dissemination algorithm, which acclimates according to the network state. Considering this, a data dissemination approach is presented in this paper, which constructs a virtual topology predicated on the charge of WSN nodes utilizing software‐defined networks (SDNs) through UAVs. The topology is constantly monitored and reconfigured when required. The aerial nodes are equipped with multiple‐input multiple‐output (MIMO) antennas in order to facilitate simultaneous communication with the ground nodes, the base station, and the SDN controller. An efficient sleep timer and backoff counter strategies are also utilized by the proposed approach. The SDN controller facilitates the topology formation and maintenance of a sleep timer and a backoff counter. The proposed model is compared with clustered hierarchical layouts and hexagonal cell layouts through the network simulations. The results suggest significant improvements in the proposed model for various metrics, such as lifetime, delay, latency, delivery ratio, and throughput in comparison with the existing solutions.     

IP address allocation protocols in vehicular ad hoc networks

In vehicular ad hoc networks (VANETs), communication takes place between vehicles to vehicles, the vehicles to the road side units, and vice-versa. The basic purpose of these communications is to share and exchange tremendous amount of data and information. For efficient information sharing, a systematic and structured connection establishment algorithm is needed. In VANETs, each connected node of the network need to be assigned a unique address. Hence, an algorithm is needed for the proper assignment of unique address to all nodes in the network. This paper explains different types of IP address protocols in VANETs. We have also explained advantage and disadvantage of existing IP address allocation protocols in VANETs.     

A High-Quality Rectifier Based on Sheppard–Taylor Converter Operating in Discontinuous Capacitor Voltage Mode

This paper presents a single-phase soft-switched high power factor (PF) Sheppard-Taylor rectifier suitable for applications requiring low-voltage and high-current output. The proposed rectifier is designed to operate at discontinuous capacitor voltage mode. The Sheppard-Taylor converter in this mode of operation provides zero-voltage turnoff switching, as well as natural input PF correction over a wide range of input voltage, which makes the converter suitable for universal input applications. Due to its simplified control circuitry and reduced switch current stress, this converter presents better efficiency and higher reliability. In addition, the presented converter features continuous input-output currents, which result in low electromagnetic interference emission. Principle of operation, theoretical analysis, and experimental results from a laboratory prototype rated at 45 W/10 Vdc output voltage are presented. The measured efficiency and total harmonic distortion of the input line current were 85% and 3.2%, respectively. The input current harmonics meet the EN61000-3-2 Class D requirements.     

A behavioral-based multi-agent optimization algorithm for system level radio design

This paper introduces a multi-agent behavioral-based optimization algorithm for system level radio design. Making multi-standard wireless communication receivers that meet their specs while keeping the requirements of the individual blocks as relaxed as possible is the goal of this algorithm. In order to achieve this goal a “divide and conquer” approach is proposed. Different agents focus on different objectives that are pursued in parallel. Agents adopt different behaviors depending on the status of the environment and their interaction with other agents. Agents are cooperative by default as they try to meet their spec without making changes that affect other agents. However, more aggressive behaviors that lead to global changes can be adopted when needed. The interaction between these simple entities yields an emergent behavior able to deal smoothly with the complexity of the problem at hand.     

Quarter-Wavelength Side-Coupled Ring Resonator for Bandpass Filters

This paper deals with a dual-mode ring resonator fed by quarter-wavelength side-coupled lines. The resonator synthesis was developed so as to fix the central frequency, bandwidth, and transmission zeros frequencies, as well as the insertion loss in the passband. Based on this resonator, several bandpass filters were designed, which include the cascaded rings and the combination of such ring resonator with coupled line sections. Simulations are proposed throughout the paper to illustrate the various possibilities offered by the concept. The filters' experimental results in microstrip technology are also presented to validate the idea.     

A CMOS RF front-end for a multistandard WLAN receiver

This letter describes the design and performance of a dual band tri-mode receiver front-end compliant with the IEEE 802.11a, b, and g standards. The receiver front-end was built in a 0.18-/spl mu/m CMOS process and achieves a noise figure of 4.7 dB/5.1 dB for the 2.4-GHz/5-GHz bands, respectively. The receiver front-end provides a dual gain mode of 5 dB/30 dB with an IIP3 of -1dBm for the low gain mode. The front-end draws 25 mA/27 mA from a 1.8-V supply for the 2.4-GHz/5-GHz bands, respectively.     

Low Complexity Partial Transmit Sequence with Complex Gain Memory Predistortion in OFDM Systems

In this paper the peak to average power ratio (PAPR) reduction and digital predistortion effects in orthogonal frequency division multiplexing (OFDM) systems are investigated. By applying a predistortion technique called complex gain memory predistortion (CGMP), power amplifier works at higher power efficiency. The proposed enhanced partial transmit sequence scheme is applied for PAPR reduction and integration with CGMP technique results in increasing in OFDM system efficiency and prolonged battery life. Simulation and results are examined with actual power amplifier and OFDM signal with quadrature phase shift keying (QPSK) modulation.     

Outage Probability Analysis of Cooperative Diversity Networks Over Weibull and Weibull-Lognormal Channels

This paper presents the analysis of outage probability for a cooperative diversity wireless network using amplify-and-forward relays over independent non-identical distributed Weibull and Weibull-lognormal fading channels for single as well as multiple relays. To reach that end, a closed-from expression for the moment-generating function of the total signal-to-noise-ratio (SNR) at the destination is derived in terms of the tabulated Meijer’s G-function. Since it is hard to determine the exact probability distribution function of the SNR, a tight lower bound approximation is proposed. Simulation results are presented that show that the outage probability lower bound tends to be tight at high SNR values thus verifying the analytical results. The results also show the potential gain of relaying on the outage probability.     

Reliability-Aware Heterogeneous 3D Chip Multiprocessor Design

Ability to stack separate chips in a single package enables three-dimensional integrated circuits (3D ICs). Heterogeneous 3D ICs provide even better opportunities to reduce the power and increase the performance per unit area. An important issue in designing a heterogeneous 3D IC is reliability. To achieve this, one needs to select the data mapping and processor layout carefully. This paper addresses this problem using an integer linear programming (ILP) approach. Specifically, on a heterogeneous 3D CMP, it explores how applications can be mapped onto 3D ICs to maximize reliability. Preliminary experiments indicate that the proposed technique generates promising results in both reliability and performance.     

Current-voltage behavior of AlGaAs/InGaAs pHEMT structures and the effect of optical illumination

Various pseudomorphic High Electron Mobility Transistor (pHEMT) structures of AlGaAs/InGaAs alloys have been observed their current-voltage behavior. The tungsten probes were used for a measurement the structures by ramping the voltage from −5 to 5 V and measure the electrical current. Measurement was carried out at room temperature and also under optical illumination. From the measurement, the electrical current was found to increase as the increase of Al content in the AlGaAs alloys layer in the pHEMT structure. This phenomenon was supported by the decrease of sheet resistance as obtained from Hall effect measurement. Under visible light illumination, the current-voltage behavior of pHEMT structure was observed to vary as the light power density was varied for 0, 25 and 55 μW/cm.