An electron microscopy three‐dimensional characterization of titania nanotubes

To characterize complex, three‐dimensional nanostructures, modern microscopy techniques are needed, such as electron tomography and focused ion beam (FIB) sectioning. The aim of this study was to apply these two techniques to characterize TiO₂ nanotubes in terms of their size, shape, volume, porosity, geometric surface area, and specific surface area (SSA). For these experiments, titania nanotubes were fabricated by means of the electrochemical oxidation of titanium at a voltage of 20 V for 2 hr followed by heat treatment at 450°C for 3 hr to change the amorphous structure into a crystalline anatase structure. The quantitative data obtained from the FIB and electron tomography reconstructions show a high similarity in porosity and some differences in SSA. These might be the result of differences in resolution between the two reconstruction techniques.     

The comprehensive in vitro evaluation of eight different calcium phosphates: Significant parameters for cell behavior

Eight different calcium phosphate nanoparticles, namely bovine bone bioapatite calcined at 500, 600, and 700°C, Mg-doped brushite, fluorinated calcium phosphate, Ca-deficient hydroxyapatite, hydroxyapatite, and tricalcium phosphate, were characterized employing physico-chemical methods. Their cytocompatibility was evaluated under human osteoblast-like cell line MG-63 culture conditions in elution media and via the direct interaction of cells with calcium phosphate nanoparticles. The main objective was to determine the correlation of the cell indices with the differently determined physical and chemical parameters of the calcium phosphates. Chemical composition, which contributes toward pH changes, and the calcium ion concentration in the medium appear to make up particularly significant factors; moreover, it was proved that the number of material types represents a further important aspect. In the case of a large number of material types, almost no correlation was determined between the analyzed parameters; however, in the case of a small number of apatite types, several positive correlations were found. It can be concluded that it is not possible to identify any monitored parameters that had a major impact on cell behavior or, at least, such an effect which can be generalized. It appears more likely that cell behavior is affected by the interplay of various parameters.     

Physicochemical,Antioxidative, and Sensory Properties of Refined Rapeseed Oils

Physicochemical characteristics, antioxidant capacity (AC), and sensory quality of rapeseed oils available on the Polish market were analyzed and compared. The fatty acid composition (saturated fatty acids = 6.91–7.58%, monounsaturated fatty acids = 64.14–66.14%, and polyunsaturated fatty acids = 27.22–30.17%), color (T420 = 54.5–83.8%), amounts of free fatty acids (0.02–0.07%), primary (PV = 0.04–2.04 meq O₂ kg⁻¹) and secondary (AV = 1.02–3.21) oxidation products, phosphorus (0.38–1.62 mg kg⁻¹), chlorophyll (0.002–0.068 mg kg⁻¹), and polycyclic aromatic hydrocarbons (Σ4PAH = 0.00–2.50 μg kg⁻¹) in the commercial rapeseed oils meet the requirements of the European Food Regulation and Codex Alimentarius standards. Moreover, total phenolic content (TPC = 40.3–467.9 mg SA kg⁻¹) in the studied oils significantly differs from each other. However, the AC of rapeseed oils was analyzed using the novel iron oxide nanoparticle-based (IONP = 5552.1 − 18,510.2 μmol TE/100 g) method and the modified ferric reducing antioxidant power (FRAP = 55.7–280.3 μmol TE/100 g), cupric reducing AC (CUPRAC = 79.6–784.0 μmol TE/100 g), 2,2-diphenyl-1-picrylhydrazyl (DPPH = 185.7–516.7 μmol TE/100 g), and 2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS = 465.6–2142.6 μmol TE/100 g) assays. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were applied for discrimination of the refined rapeseed oils based on fatty acid composition, physicochemical parameters, AC, and sensory properties.     

Ranking of refrigerants

Environmental ranking of refrigerants is of need in many instances. The aim is to assess the relative environmental hazard posed by 40 refrigerants, including those used in the past, those presently used, and some proposed substitutes. Ranking is based upon ozone depletion potential, global warming potential, and atmospheric lifetime and is achieved by applying the Hasse diagram technique, a mathematical method that allows us to assess order relationships of chemicals. The refrigerants are divided into 13 classes, of which the chlorofluorocarbons, hydrofluorocarbons, hydrochlorofluorocarbons, hydrofluoroethers, and hydrocarbons contain the largest number of single substances. The dominance degree, a method for measuring order relationships among classes, is discussed and applied to the 13 refrigerant classes. The results show that some hydrofluoroethers are as problematic as the hydrofluorocarbons. Hydrocarbons and ammonia are the least problematic refrigerants with respect to the three environmental properties.     

Evaluation of standard and new chromogenic selective plating media for isolation and identification of Bacillus cereus

In this study, the performance of two new chromogenic plating media (CBC and BCM) was compared with two standard selective plating media (PEMBA and MYP) recommended by food authorities for isolation, identification and enumeration of Bacillus cereus. The four media types were challenged with a strain set comprising 100 B. cereus isolates from different origins and with different toxigenic potentials (40 food isolates, 40 isolates from food borne outbreaks and 20 clinical isolates). Additionally, the performance of the plating media for analysis of complex samples was assessed using naturally contaminated foods. Our survey showed that the new chromogenic media represent a good alternative to the conventional standard media. Especially, if laboratory staff are not highly trained in identification of B. cereus, the conventional media could lead to substantial misidentification and underestimation of food borne illness caused by B. cereus. However, there are some B. cereus strains that could not even be detected with this new type of chromogenic media. After the fatal misidentification of a highly toxic strain, other methods for a conclusive identification of B. cereus are needed. Sequence analysis of the plcR gene, a pleiotropic regulator of various virulence factors and B. cereus specific enzymes, revealed a significant correlation between atypical colony appearance and specific variances within the plcR gene sequences of those strains. The current concept of selective plating media, utilising PlcR regulated enzyme activities for differentiation purposes, should therefore be reconsidered and research should be geared towards culture independent methods.     

Vanadium promoted Ni(Mg,Al)O hydrotalcite-derived catalysts for CO2 methanation

A series of V-promoted hydrotalcite-derived nickel catalysts (1.0, 2.0, and 4.0 wt%) were tested in CO₂ methanation. Ni–I–V2.0 with 2.0 wt% vanadium loading showed the highest catalytic activity, achieving 74.7% of CO₂ conversion and 100% of CH₄ selectivity at 300 °C. XRD and XANES analyses showed that the smallest Ni⁰ particles in Ni–I–V2.0 were consistent with the improved textural features observed for this catalyst. Moreover, CO₂-TPD revealed the highest sum of weak and medium basic sites in Ni–I–V2.0 that can positively influence catalytic behavior. For the studied catalysts, a clear correlation was demonstrated between the catalytic activity and specific surface area, as well as the basic properties.     

Dipeptides of S-Substituted Dehydrocysteine as Artzyme Building Blocks: Synthesis,Complexing Abilities and Antiproliferative Properties

Background: Dehydropeptides are analogs of peptides containing at least one conjugate double bond between α,β-carbon atoms. Its presence provides unique structural properties and reaction centre for chemical modification. In this study, the series of new class of dipeptides containing S-substituted dehydrocysteine with variety of heterocyclic moieties was prepared. The compounds were designed as the building blocks for the construction of artificial metalloenzymes (artzymes). Therefore, the complexing properties of representative compounds were also evaluated. Furthermore, the acknowledged biological activity of natural dehydropeptides was the reason to extend the study for antiproliferative action of against several cancer cell lines. Methods: The synthetic strategy involves glycyl and phenylalanyl-(Z)-β-bromodehydroalanine as a substrate in one pot addition/elimination reaction of thiols. After deprotection of N-terminal amino group the compounds with triazole ring were tested as complexones for copper(II) ions using potentiometric titration and spectroscopic techniques (UV-Vis, CD, EPR). Finally, the antiproliferative activity was evaluated by sulforhodamine B assay. Results and Conclusions: A simple and efficient procedure for preparation of dipeptides containing S-substituded dehydrocysteine was provided. The peptides containing triazole appeared to be strong complexones of copper(II) ions. Some of the peptides exhibited promising antiproliferative activities against number of cancer cell lines, including cell lines resistant to widely used anticancer agent.     

Effect of microstructural features on the corrosion behavior of severely deformed Al–Mg–Si alloy

The aim of this study was to determine the influence of severe plastic deformation processing and the changes in microstructure resulting therefrom on the corrosion resistance of an Al–Mg–Si alloy. The alloy was processed using incremental equal channel angular pressing, which caused a reduction in grain size from 15 to 0.9 µm. The grain refinement was accompanied by an increase in the number of grain boundaries and dislocations, and by changes in grain orientation. However, there was no change in the size and number of intermetallic particles, which presumably resulted in a constant number of galvanic couplings. Electrochemical experiments revealed only slight differences between the samples before and after processing. Higher potential transients/oscillations upon immersion and increased corrosion currents in the vicinity of corrosion potential point to slightly higher reactivity of the most refined material. This indicates that intermetallic particles are the most crucial microstructural elements in terms of corrosion resistance. Their impact exceeds that of grain boundaries, in particular, at the stage of corrosion initiation. The development of corrosion attack is controlled more by the microstructure of the matrix as the grain refinement resulted in a less pronounced corrosion attack in comparison with the coarse-grained sample.     

Evaluation of a Novel Plasmid for Simultaneous Gene Electrotransfer-Mediated Silencing of CD105 and CD146 in Combination with Irradiation

Targeting tumor vasculature through specific endothelial cell markers represents a promising approach for cancer treatment. Here our aim was to construct an antibiotic resistance gene-free plasmid encoding shRNAs to simultaneously target two endothelial cell markers, CD105 and CD146, and to test its functionality and therapeutic potential in vitro when delivered by gene electrotransfer (GET) and combined with irradiation (IR). Functionality of the plasmid was evaluated by determining the silencing of the targeted genes using qRT-PCR. Antiproliferative and antiangiogenic effects were determined by the cytotoxicity assay tube formation assay and wound healing assay in murine endothelial cells 2H-11. The functionality of the plasmid construct was also evaluated in malignant melanoma tumor cell line B16F10. Additionally, potential activation of immune response was measured by induction of DNA sensor STING and proinflammatory cytokines by qRT-PCR in endothelial cells 2H-11. We demonstrated that the plasmid construction was successful and can efficiently silence the expression of the two targeted genes. As a consequence of silencing, reduced migration rate and angiogenic potential was confirmed in 2H-11 endothelial cells. Furthermore, induction of DNA sensor STING and proinflammatory cytokines were determined, which could add to the therapeutic effectiveness when used in vivo. To conclude, we successfully constructed a novel plasmid DNA with two shRNAs, which holds a great promise for further in vivo testing.