CEDAR: Modeling impact of component error derating and read frequency on system-level vulnerability in high-performance processors

Reliability of the current microprocessor technology is seriously challenged by radiation-induced soft errors. Accurate Vulnerability Factor (VF) modeling of system components is crucial in designing cost-effective protection schemes in high-performance processors. Although Statistical Fault Injection (SFI) techniques can be used to provide relatively accurate VF estimations, they are often very time-consuming. Unlike SFI techniques, recently proposed analytical models can be used to compute VF in a timely fashion. However, VFs computed by such models are inaccurate as the system-level impact of soft errors is overlooked.     

Image-based gating of intravascular ultrasound pullback sequences

Intravascularultrasound (IVUS) sequences recorded in vivo are subject to a wide array of motion artifacts as the majority of these studies are performed within the coronary arteries of a beating heart. To eliminate these artifacts, an electrocardiogram (ECG) signal is typically used to gate (collect) those frames recorded at the points in time associated with a particular fraction of the cardiac cycle. However, this technique may be suboptimal for a number of reasons, among which is the difficulty of determining the optimal fraction at which to gate. This value is generally nonobvious. To circumvent this problem, we introduce a frame-gating method for IVUS pullbacks that mimics ECG (i.e., in the sense that it selects only one frame per cardiac cycle), but will automatically choose the fraction of the cycle that renders the most stable gated frame set. Stability here is gauged by measuring interframe similarity. Our method operates exclusively on the imagery data and does not require ECG or any form of image segmentation or other high-level image analysis. To validate our algorithm, we compare its behavior versus true ECG gating.     

Survey of Irrigation Methods in California in 2001

Reliable information on irrigation methods is important for determining agricultural water demand trends. Therefore, a study was conducted during 2002 to collect information on irrigation methods that were used by growers to irrigate their crops in 2001. The results were compared to earlier surveys to assess trends in cropping and irrigation methods. A one-page questionnaire was developed to collect information on irrigated land by crop and irrigation methods. The questionnaire was mailed to 10,000 growers in California that were randomly selected from a list of 58,000 growers by the California Department of Food and Agriculture, excluding rice, dry-land, and livestock producers. From 1972 to 2002, the area planted has increased from 15 to 31% for orchards and from 6 to 16% for vineyards. The area planted to vegetables has remained relatively static, while that planted to field crops has declined from 67 to 42% of the irrigated area. The land irrigated by low-volume (drip and microsprinkler) irrigation has increased by about 33%, while the amount of land irrigated by surface methods has decreased by about 31%. Sprinkler usage has decreased in orchards and vineyards, but it has increased in vegetable crops.     

Determination of Tehran Research Reactor power by N gamma detection

The radioisotope ¹⁶N is produced by the interaction of fast neutrons with ¹⁶O in water reactor coolant. This radioisotope emits at the two major gamma ray energies of 6.13 MeV and 7.1 MeV. Exploiting the linear relation between the number of gamma particles versus the reactor power change, the reactor power is determined by detecting and counting the emitted gammas. In this work, for the detection of gammas to measure the reactor power, two different methods are employed. First, by NaI(Tl) scintillator detector and second, by assembly of ten GM detectors. The obtained results confirm that the number of emitted gammas is proportional to the change in reactor power as shown by different monitoring systems such as UIC, CIC, FC, Cherenkov and thermal power. Both of the applied methods are shown to give reliable results for reactor power above 20 kW. Both systems, having been calibrated, are being used as monitoring systems of power in Tehran Research Reactor. These systems are usable in other research reactors and possibly in power reactors as well.     

PVC membrane potentiometric sensor based on 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthroline-phane for selective determination of neodymium(III)

Spectrofluorometric studies on the binding properties of 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthrolinephane (L) toward La3+, Sm3+, Gd3+, Yb3+, and Nd3+ in methanol solution revealed the occurrence of both 1:1 and 2:1 (ligand/metal) complexation with a stability order of Nd3+ > Yb3+ > Gd3+ > Sm3+ > La3+. Consequently, L was used as a suitable neutral ionophore for the preparation of a novel polymeric membrane-selective electrode for Nd3+ ion. The electrode exhibited a Nernstian response over a wide concentration range (1.0 x 10(-6)-1.0 x 10(-2) M) with a low limit of detection of 7.9 x 10(-7) M. The electrode possesses a fast response time of <5 s and can be used for at least 9 weeks without observing any considerable deviation. The proposed electrode revealed a very good selectivity for Nd3+ over a wide variety of alkali, alkaline earth, transition, and heavy metal ions, including members of the lanthanide family other than Nd3+. The potentiometric response of the electrode is independent of the pH of test solution in the pH range 4.0-6.5. The proposed electrode was successfully applied to the recovery of Nd3+ ion from tap water samples and, also, as an indicator electrode, in potentiometric titration of neodymium(III) ions.     

The Minimal Generator Matrix of a Vector Space

The atomic vectors of a finitely generated vector space C over a field F are characterized for C a subspace of the product vector space ? = ∏ _{i =1} ⁿ ? _i over F. For finite fields, the minimal trellis diagram for mixed-codes is determined, and this provides the L-section minimal trellis diagram for linear codes. As an example, an extremely simple yet comprehensive analysis of the trellis structure of Reed-Muller codes is given. In particular, a trellis oriented generator matrix for the 2 ^l -section minimal trellis diagram of a Reed-Muller code is presented. Received: February 27, 1997; revised version: May 6, 1999     

Design, Construction and Calibration of a Triaxial Dynamometer for Measuring Forces and Moments Applied on Tillage Implements in Field Conditions

In this research, a dynamometer was designed, constructed and calibrated to measure the forces and moments applied on tillage implements. This dynamometer is able to measure the three orthogonal forces acting on the implement and the three moments acting around the orthogonal axes, up to a maximum force of 20 kN and a maximum moment of 20 kN m. The dynamometer uses two extended octagonal ring transducers mounted in a back-to-back arrangement with their axes at right angles and has a tubular torque meter for torque measurement. For mechanical design of the dynamometer frame and its units, the finite element method and CATIA software were used. The device was machined from the solid part and high tensile steel. The forces and moments acting on the dynamometer were measured by using the strain gauge bridges on two extended octagonal ring transducers and on the torque meter tube. The results of data analysis, including forces applied on the dynamometer, the designing method of rings and torque meter tubes, the mounting arrangement of load cell parts on each other, the mounting method of load cell on frame and the position of strain gauge on load cell, in other words, the position of different parts of the dynamometer relative to each other has been explained in this paper. Calibration of the measurement unit was done by a calibration system which was designed for static calibration of the triaxial dynamometer. The results of calibration of the measurement unit showed that the designed and constructed dynamometer has appropriate precision, sensitivity and good repeatability for measuring the desired forces and moments. The results showed a high degree of linearity between output voltage of bridges and applied forces and moments. The interaction effects of the applied forces and moments were very negligible.