灭多威在棉花及土壤中降解动态及残留量研究

按生产上常规用量，每亩喷施２０％灭多威乳油６０毫升防治二代棉铃虫，施药后７天在棉叶上及１４天在土壤中其降解率分别为９８．８１％及８８．０９％；半衰期分别的１．５６天及４．９８天。防治二、三、四代棉铃虫，按有效剂量施药６次，有效成分７２克／亩，棉籽和土壤中的最大残留量分别为０．０２３及０．０８４微克／克；再加大５０％用量，有效成分１０８克／亩，最大残留量仅为０．０３４及０．２１４微克／克。结果表明，灭多威在棉叶上及土壤中降解较迅速，常规用量下，对棉籽及土壤污染较轻。     

基于仿射传播的有向网络聚类算法

现有大多数的网络聚类方法都只是针对无向网络, 已有的有向网络聚类方法建立在传统聚类算法基础之上, 存在着一定的局限性。针对上述问题, 提出一种基于仿射传播的有向网络聚类算法, 该算法首先采用SimRank作为节点之间的相似度, 并将计算得到的结果转换为适应于仿射传播算法的负值; 然后将相似度矩阵作为输入, 利用具有更好性能的仿射传播算法对有向网络进行聚类。实验结果表明, 所提出算法的聚类性能优于其他几种具有代表性的有向网络聚类算法。     

果酸脂质体的制备、检测及应用

以大豆卵磷脂为包封材料 ,用反相蒸发法制备果酸脂质体。并用透射电子显微镜表征了其形态结构 ,证实其直径在1 0 0纳米～ 2 0 0纳米之间。研究了果酸浓度对包封率 ,稳定剂浓度对脂质体稳定性的影响。结果表明 ,果酸浓度为 0 .3mg/ml时可以得到较好的包封率 ,丙二醇的适宜浓度是 5 % -1 5 % ,最终将脂质体应用于化妆品中 ,并证明是可行的     

Influence of processing on ethylene propylene block copolymers (II): Fracture behavior

The present work investigates the relationships between the microstructural state and fracture properties in commercial polypropylene‐based materials. In this case an isopolypropylene homopolymer and three ethylene propylene block copolymers (EPBC) with different ethylene content (EC) have been studied. A variety of morphologies were obtained by a combination of several processing methods (injection molding, injection molding‐annealing, and compression molding) and thickness. Fracture behavior of deeply double‐edged notched specimens was evaluated by scanning electron microscopy (SEM) and by the essential work of fracture (EWF) method, analyzing the influence of processing, thickness (t), EC, and orientation respect to melt flow direction (MD and TD). The testing direction and EC are the most relevant variables that affect the ability of the crack tip to deform plastically during the crack propagation, determining the final fracture behavior. The fracture parameters obtained with the EWF method, specific EWF, w_e, and plastic item, βw_p, have proved to be very sensitive to the processing induced morphology, finding interesting relationships between such morphologies (characterized by crystallinity index, orientation level, and skin/core ratio) and the fracture parameters of the plaques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2714–2724, 2006     

STM32的双路信号源及其配置平台设计

针对目前测量分析、弱信号检测的需求,以STM32F107和AD9958为核心实现了一种高分辨率幅度、频率、相位的双路信号源。首先对直接数字合成(Direct Digital Synthesis,DDS)工作原理进行介绍,重点分析了杂散的主要来源,并设计LC椭圆低通滤波器对杂散进行抑制。设计输出电路使信号源满足低频需求,并可直接用于驱动负载。最后采用STM32F107和VC6.0搭建了配置平台,对信号源波形灵活控制。     

试述疗养院信息化建设

当今社会疗养院建设快速推进,疗养院卫生信息化发展极为迅速.那么疗养院怎样根据自身情况,提高疗养院整体管理水平、规范各项医疗工作,已成为一个迫切需要解决的问题.这就要求疗养院必须提高自己的自身信息化建设水平,必须跟上社会卫生信息化建设步伐.本文对疗养院信息化建设的基本情况、遇到的主要问题及其今后发展的趋势进行了探讨.以促进疗养院信息化建设迅速健康的发展.     

Inactivation of Fusarium oxysporum Conidia in Soil with Gaseous Ozone – Preliminary Studies

ABSTRACT

In this study, the efficiency of gaseous ozone (O₃) injected in the soil as an oxidizing agent for the inactivation of F. oxysporum was evaluated under laboratory conditions. The results show the treatment reached an inactivation efficiency of 76% after an applied dose of 0.40 g O₃ kg ^?1 soil. This shows that the injection of O₃ can be a viable alternative to control pathogenic organisms in the soils. Nevertheless, it is clear that more studies on determining the effects of this treatment on soil quality are needed.     

Modèles Hydrodynamiques pour la Séparation des Courants dans un Décanteur Pilote

Despite of its general use in industry, particle sedimentation is still a not well understood unit operation. Hydrodynamics is complex in essence, mainly because the possible volumes are depending on the operating conditions, which in turn has consequences on the stability of the equipment in unsteady state conditions.     

节约型高校建设对策探析

讨论节约型高校建设的现实价值以及节约型高校建设的问题和成因,从思想政治教育、科学管理、科研创新、典型示范的角度出发,论述了加强节约型高校建设的对策。     

烟气冷凝热能回收利用装置烟气流动方式优化研究

烟气冷凝热能回收利用装置中烟气的分布与流动对换热起着重要作用,为优化烟气冷凝热能回收利用装置,保证烟气能够在装置中分布均匀、充分换热,分别设计两种烟气流动方式,采用CFD软件Fluent模拟了烟气冷凝热能回收利用装置中的流场及温度场,并将其分别应用于实际工程进行现场实测.结果表明,采用渐变断面设计的烟气流动方式,烟气在换热面上分布更均匀,更有利于强化换热,阻力更小,节能率比采用等高断面最大可提高3.25%,可有效降低和消除噪音.