基于IOS平台的小型仓储管理系统设计

随着数字化、信息化技术在物流领域应用的飞速发展,各种各样的仓储管理系统日益受到关注。本文介绍的基于IOS平台的小型仓储管理系统是利用IOS设备对货物信息进行采集,通过SQLite数据库技术、ZXing库等软硬件方式构建的业务系统,可以较好地适应中小规模用户数据交互的需求。同时,系统具备造价低廉、操作便捷等优点。     

雷达吸波材料的研究现状及发展前景

首先阐述了吸波材料的研究意义,然后综合讨论了吸波材料的工作原理、类型以及研究现状, 最后介绍了吸波材料在军事方面的应用及未来的发展趋势。     

脱乙烷系统参数优化

吉化300kt/a乙烯装置脱乙烷系统采用德国Linde公司双塔双压前脱乙烷技术，自1996年开始以来，运行良好，通过工程技术人员近两年的探索实践，对其工艺参数做了较大的优化调整，取得了较好的经济效益。     

A novel cyclodextrin-derived tellurium compound with glutathione peroxidase activity

A novel dicyclodextrinyl ditelluride (2-TeCD) compound was devised as a functional mimic of the glutathione peroxidase (GPX) enzymes that normally remove hydroperoxides from the cell. The GPX activity of the mimic was found to be 46.7 U microM(-1), which is 46 times as active as Ebselen, a well-known GPX mimic. A detailed steady-state kinetic study was undertaken to probe the reason for the high catalytic efficiency of 2-TeCD. This high efficiency can be explained based on both the binding of the substrate to the cyclodextrin and the catalytic mechanism of 2-TeCD, which is different from that of diselenide compounds. 2-TeCD exhibits good water solubility and is chemically and biologically stable. The biological effect of 2-TeCD was evaluated by its ability to protect mitochondria from oxidative damage. 2-TeCD exhibited excellent antioxidant capacity in comparison with Ebselen.     

Al ionic radius influence on molecular dynamics simulations ofγ-Al2O3

Molecular dynamics (MD) simulations of-Al₂O₃, using a pairwise additive interaction potential of Pauling's type with four different radii for aluminum atoms, were analysed in order to determine the influence of the radius on the modification of coordination numbers of A1 relative to the ideal structure, at two different temperatures of 300 and 1500 K. It is found that the best choice is the radius of penta-coordinated aluminum, reproducing structural and vibrational properties of the compound in excellent agreement with experimentally observed properties.     

Si3N4陶瓷材料的高温氧化理论及其抗氧化研究现状

从热力学、动力学和整体控速过程探讨了氮化硅陶瓷材料高温氧化理论和氧化性质，阐述了表面改性技术对氮化硅抗氧化性能的影响．并对表面改性提高氮化硅抗氧化性能进行了展望。     

异吲哚啉及异吲哚啉酮颜料（二）

该文重点讨论了异吲哚啉及异吲哚啉酮颜料的品种,分子结构,特性与应用;颜料的合成工艺,颜料化和相关中间体.该类颜料以黄色品种为主,由于存在分子间及分子内氢键、并构成立体的网状堆砌,具有优异的牢度性能和重要用途.     

Mixed monolayer and mixed micelle formation in binary mixture of surfactants—Systems for trioxyethylenated dodecyl sulfonate and some polyoxyethylenated fatty alcohol ether nonionic surfactants

The interaction and synergism of some polyoxyethylenated fatty alcohol ether (POE) nonionic surfactants (C₁₂E₂, C₁₂E₃, C₁₀E₅, C₁₀E₇, where C_x indicates number of carbon atoms in the chain and E_y indicates number of oxyethylene glycol ethers) with trioxyethylenated dodecyl sulfonate (C₁₂E₃S) in mixed monolayer formation at the surface and in mixed micelle formation in aqueous solutions were studied at 25 and 40°C by calculating interaction parameters (β_α, β_M) from surface tension-concentration data by use of Rosen's equations based on the nonideal solution theory. All the systems investigated adapt reasonably well to the nonideal model, with negative values of β_σ and β_M (where M means micelle and σ refers to the air-liquid interface) indicating a favorable interaction between the mixed surfactants. Either at a monolayer or in a mixed micelle, the attractive interaction becomes stronger when the alkyl chain in the POE surfactant is longer, i.e., when the POE becomes more hydrophobic. The interaction increases in the order C₁₀E₇<C₁₀E₅<C₁₂E₃, C₁₂E₂. For the two C₁₀E _n (n= 5,7)/C₁₂E₃S systems, as temperature increases from 25 to 40°C, the interaction increases in a mixed micelle, but it decreases in a mixed monolayer. Synergism in mixed micelle formation exists for C₁₂E₃S/C₁₀E _n mixtures when X₁ ^M , the mole fraction of POE in a mixed micelle, is ≈0.4–0.8, whereas synergism does not occur in the systems of C₁₂E₃S/C₁₂E _m due to the large difference between CMC₁ and CMC₂, i.e., large |In(C ₁ ^M /C ₂ ^M )| value (where CMC=critical micelle concentration). The degree of synergism in mixed micelle formation is temperature independent and is 0.23, 0.18, and close to zero for C₁₀E₅/C₁₂E₃S, C₁₀E₇/C₁₂E₃S, and C₁₂E _m (m=2,3)/C₁₂E₃S systems, respectively. Synergism in surface tension reduction effectiveness occurs in C₁₂E₃S/C₁₂E₂ and C₁₂E₃S/C₁₂E₃ systems. The mole fractions of POE in the solution phase are 0.302 and 0.333 for the two mixtures at the point of maximum synergism.     

Physical agglomeration behavior in preparation of cellulose‐N‐methyl morpholine N‐oxide hydrate solutions by simple mixing

The different melting temperatures of N‐methyl morpholine N‐oxide (NMMO) hydrates in the cellulose–NMMO hydrate solution may be explained by the rather different crystal structures of NMMO hydrates, which are determined by the amount of the hydrates. The preparative process of cellulose–NMMO hydrate solution may result in cellulose structural change from cellulose I to cellulose II, depending on the amount of the hydrate. Mixtures of cellulose and NMMO hydrate in a blender was changed from the granules to slurry with increasing mixing time at 60–70°C, which is below the melting point of the NMMO hydrate. In the case of 15 wt % cellulose–NMMO hydrate granules, which were made by mixing for 20 min, the melting points of various NMMO hydrates were obtained as 77.8°C (n = 0.83), 70.2°C (n = 0.97), and 69.7°C (n = 1.23), respectively, depending on the hydrate number. However, the melting points of cellulose–NMMO hydrate slurry and solution were shifted lower than those of cellulose granules, while the mixing time of slurry and solution are 25 and 35 min, respectively. These melting behaviors indicate instantaneous liquefaction of the NMMO hydrate and the diffusion of the NMMO hydrate into cellulose during mixing in a blender. When cellulose was completely dissolved in NMMO hydrate, the crystal structure of cellulose showed only cellulose II structure. In the cellulose–NMMO products of granules or slurry obtained by high‐speed mixing, which is a new preparation method, they still retained the original cellulose I structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1687–1697, 2004     

Fabrication and characterization of PFSI/ePTFE composite proton exchange membranes of polymer electrolyte fuel cells

PFSI/ePTFE composite proton exchange membranes were fabricated by impregnating perfluorosulfonic acid resin (PFSI resin, Nafion) into chemically modified expanded PTFE (ePTFE) matrix. Chemical modification of sodium-naphthalene treatment and N-methylol acrylamide (NMA) grafting decreased the contact angle of the as-received ePTFE from 125 ± 0.5° to 67 ± 0.5°, effectively converting the as-received hydrophobic ePTFE to a hydrophilic ePTFE matrix. The composite membrane fabricated with the hydrophilic ePTFE have higher impregnated PFSI loading, much lower porosity and better PTFE/PFSI interface contact, as compared to the composite membranes with the as-received ePTFE. This leads to much lower gas permeability and significantly improves the durability under an accelerated dry/wet cycle test. The fuel cell made from the PFSI/ePTFE composite membranes with hydrophilic ePTFE showed superior performance as compared to that with the composite membrane made from the as-received ePTFE and Nafion 211 membrane.