Developments of high performance vibration absorber from poly(vinyl chloride)/chlorinated polyethylene/epoxidized natural rubber blend

A high performance vibration absorber requires a high loss factor behavior over a wide temperature and frequency range. An investigation was carried out to prepare such materials based on poly(vinyl chloride), chlorinated polyethylene, and epoxidized natural rubber ternary blends. The loss factor and damping behavior of several compositions were measured using a viscoelastic spectrometer and a polymer‐laminated steel cantilever‐beam damping device. Suitable compositions were found to give good mechanical properties and high loss factor over a wide temperature and frequency range. It was also observed that flake‐type fillers improve the damping behavior. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 855–863, 1999     

Interpretation of way-finding healthcare symbols by a multicultural population: Navigation signage design for global health

The interpretation of way-finding symbols for healthcare facilities in a multicultural community was assessed in a cross-sectional study. One hundred participants recruited from Al Ain city in the United Arab Emirates were asked to interpret 28 healthcare symbols developed at Hablamos Juntos (such as vaccinations and laboratory) as well as 18 general-purpose symbols (such as elevators and restrooms). The mean age was 27.6 years (16–55 years) of whom 84 (84%) were females. Healthcare symbols were more difficult to comprehend than general-purpose signs. Symbols referring to abstract concepts were the most misinterpreted including oncology, diabetes education, outpatient clinic, interpretive services, pharmacy, internal medicine, registration, social services, obstetrics and gynecology, pediatrics and infectious diseases. Interpretation rates varied across cultural backgrounds and increased with higher education and younger age. Signage within healthcare facilities should be tested among older persons, those with limited literacy and across a wide range of cultures.     

Resolution of a Five-Component Mixture of Quaternary Ammonium Surfactants on Silica Gel 60 <Emphasis Type=Italic>F</Emphasis><Subscript>254</Subscript> High Performance Thin Layer Chromatographic Plates

The mutual separation of a mixture of cetyltrimethyl ammonium chloride (CTAC), methyl trioctyl ammonium bromide (MTOB), dodecyltrimethyl ammonium chloride (DTAC), benzyltrimethyl ammonium chloride (BTAC) and tetrabutyl ammonium bromide (TBAB), was achieved on silica high performance thin layer chromatographic plates using dimethyl sulfoxide with aqueous sodium-l-tartrate dibasic dihydrate as the solvent system. The effect of concentration of sodium-l-tartrate dibasic dihydrate on the mobility of all the five quaternaries was examined. The limit of detection of CTAC, MTOB, DTAC, BTAC and TBAB was estimated as 0.6, 0.6, 0.3, 0.6 and 0.3 μg/zone, respectively. The method developed was utilized to identify these surfactants in different spiked water samples after their preliminary separation.     

Comparison of ionic liquid,acid and alkali pretreatments for sugarcane bagasse enzymatic saccharification

BACKGROUND: Much attention has been given to applying ionic liquids (ILs) as an alternative pretreatment method for lignocellulosic biomass. This study aims to select the most suitable type of IL for pretreating sugarcane bagasse (SCB). The potential of ILs for pretreatment was evaluated and compared with conventional pretreatment media, acids and alkalis. The performance of the pretreatment media was evaluated based on the amount of reducing sugar produced from enzymatic saccharification, the energy requirement, and changes in the chemical structure and crystallinity index of the pretreated bagasse. RESULTS: 1‐ethyl‐3‐methylimidazolium acetate [EMIM]oAc was selected as the most suitable IL for SCB pretreatment. The optimum yields of reducing sugar obtained from [EMIM]oAc‐, alkali‐, and acid‐pretreated SCB were 69.5%, 92.8% and 41.3%, respectively. Although a lower yield of reducing sugar was obtained, [EMIM]oAc pretreatment required the least energy to pretreat 1 kg of SCB. Moreover, the percentage of SCB loss during [EMIM]oAc pretreatment was the lowest. [EMIM]oAc‐pretreated SCB also had the lowest crystallinity index (CI) with the most amorphous structure. CONCLUSION: [EMIM]oAc appears to be another option for pretreating SCB, and other issues such as the recyclability of [EMIM]oAc is worth investigating. Copyright © 2011 Society of Chemical Industry     

Phase Transitions in Liquid Crystal Doped with Magnetic Particles of Different Shapes in Combined Electric and Magnetic Fields

We have studied the influence of electric and magnetic fields on the orientational structure of ferronematics based on a thermotropic nematic 4-trans-4 \(^{\prime }\) -n-hexylcyclohexyl-isothiocyanato-benzene (6CHBT). The 6CHBT liquid crystal has been dissolved in phenyl isothiocyanate and doped with rod-like or chain-like magnetic particles. In such a mixture, the phase transition from an isotropic to a nematic phase is via a droplet state, i.e., coexistence of nematic and isotropic phases. The obtained results showed that a combination of the electric and magnetic fields can change the character of a phase transition from the isotropic to the nematic phase via the droplet state in such systems. Moreover, magneto-dielectric measurements of structural transitions showed the magnetic field induced a shift of the phase transition temperature from the isotropic to the droplet state.     

Slip MHD liquid flow and heat transfer over non-linear permeable stretching surface with chemical reaction

In the present study the magnetohydrodynamic (MHD) liquid flow and heat transfer over non-linear permeable stretching surface has been presented in the presence of chemical reactions and partial slip. By means of proper similarity variables, the fundamental equations of the boundary layer are transformed to ordinary differential equations which for the fixed values of the x-coordinate along the plate local similarity solution would be valid appropriately. The ordinary differential equations are solved numerically using an explicit Runge–Kutta (4, 5) formula, the Dormand–Prince pair and shooting method. As a result, the velocity profiles, the concentration profiles, temperature profiles, the wall shear stress, the local Sherwood number and the local Nusselt number for the various values of the involved parameters of the problem are presented and discussed in details.     

Economic and environmental benefits of landfill gas from municipal solid waste in Malaysia

Discharge of Green House Gases (GHGs) and the management of municipal solid waste (MSW) continue to be a major challenge particularly in growing economies. However, these are resources which can be converted to green energy. Landfill gas which is essentially methane (50–55%) and carbon dioxide (40–45%) (both GHGs) is released from MSW by biodegradation processes. The estimation of this methane and its economic and environmental benefits for environmental sustainability are the objectives of this study. Methane emission from MSW disposed of in landfills was estimated using Intergovernmental Panel on Climate Change (IPCC) methodology. From the study, based on 8,196,000 tonnes MSW generated in Peninsular Malaysia in 2010, anthropogenic methane emission of about 310,220 tonnes per year was estimated. This was estimated to generate 1.9 billion kWh of electricity year^?1 worth over RM 570 million (US$190 million). In addition, this leads to carbon dioxide reduction of 6,514,620 tonnes year^?1 equivalent to carbon credit of over RM 257 million (US$85 million). These results were also projected for 2015 and 2020 and the outcomes are promising. Therefore, the exploration of this resource, besides the economic benefits helps in reducing the dependence on the depleting fossil fuel and hence broadening the fuel base of the country.     

Optimize Routing Protocol Overheads in MANETs: Challenges and Solutions: A Review Paper

Wireless Personal Communications - Routing is one of the most challenging task in mobile ad hoc networks. Several works have been proposed to address this challenge. Majority numbers of researchers...     

Siamese convolutional neural network and fusion of the best overlapping blocks for kinship verification

Multimedia Tools and Applications - Analysis of facial images decoding familial features has been attracting the attention of researchers to develop a computerized system interested in determining...