0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Hydrogen Permeability of Borosilicate Glasses

Borosilicate glass-forming compositions R₂O – B₂O₃ – SiO₂ – R_aO_b (R — Li, Na, K; R_a — Zn, PbO) are investigated. A correlation-regression analysis of the criteria (the silicate modulus, the oxygen number, the structure cohesion factor, the relative molar volumes of the components) affecting the hydrogen permeability of glasses is carried out. The tendency for permeability variations depending on the component composition and the above specified criteria is identified.     

Application of MHD Effects in Electrolytes for Modeling Vortex Processes in Natural Phenomena and in Solving Engineering-Physical Problems

This paper gives an overview of the experimental results obtained by the method of MHD modeling in thin electrolyte layers and used to solve problems connected with the appearance of monotonic and vibrational instabilities. Primary consideration is given to the generation and interaction of transient vortex processes. As examples, the results of the investigations of flows in systems of two, three, and four vortices and periodic vortex structures, as well as of flows in the presence of obstacles of different permittivity modeling plants or technogenic screening devices intended to protect objects against pollution are presented. We consider the ways of using the results obtained in studying natural phenomena and in solving engineering-technical problems connected with mass and heat transfer and electrotransmission.     

A fast-settling GaAs-enhanced frequency synthesizer

An indirect, phase-locked-loop (PLL), GaAs-enhanced frequency synthesizer with 700 ns loop settling time has been developed. The two-chip GaAs insertion reduced the size of an existing synthesizer from 90 in³ to only 30 in³. The 6.0 in×5.5 in.×0.9 in module contains a 400 gate GaAs programmable divider and a sample and hold (S/H) which improved the settling time by 77% and reduced the size by 67% over the current state-of-the-art synthesizer. Furthermore, the divider reduced power dissipation by 9.7 W and the S/H reduced power dissipation by 1.3 W     

Acicular ferrite transformation in deformed austenite of an alloy-steel weld metal

The effect of different amounts (5, 10 and 15%) of compressive deformation of austenite on the isothermal transformation of acicular ferrite in an alloy-steel weld metal has been investigated. It was found that prior deformation of austenite significantly enhanced acicular ferrite transformation. At the same isothermal transformation temperature, as a higher amount of prior deformation was applied, a greater quantity of acicular ferrite could be obtained and the size of acicular ferrite plates became much finer. These results implied that the effective nucleation sites of acicular ferrite increased with increasing amount of prior deformation. The other results also emphasized that the accumulated strain (due to prior deformation of austenite) could trigger acicular ferrite to nucleate on inclusions at high temperatures, where undeformed austenite remained stable. The acicular ferrite start temperature was found to be raised continuously by increasing the amount of prior deformation of austenite. Further evidence suggests that the application of deformation can boost the driving force for acicular ferrite formation. This phenomenon is similar to the case in which martensite forms under the influence of deformation.     

Relationship between CO2 Sensor Voltage Response and Phase Equilibrium of Solid Electrolyte Na, K-β/β"-Al2O3

A type of CO2 sensor based on oxygen concentration cell was designed as following: Cell I: Pt | Au, O2,CO2|Na2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt or Cell Ⅱ: Pt|Au, O2, CO2|K2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt.(Na,K-β/β″-Al2O3 is named by NKBA). The sensor signal is consistent with the Nernstian slope within the region ofphase equilibrium for Na, K-β/β"-Al2O3 material. The relationship between CO2 sensor voltage response and phaseequilibrium of solid electrolyte Na, K-β/β-Al2O3 is discussed in this paper.     

Comparison of two models for a high temperature reactor coupled to a gas turbine

This paper presents two independent dynamic models of a nuclear gas turbine power plant. Both the high temperature nuclear reactor (HTR) and its energy conversion system (ECS) based on a direct Brayton cycle have been modelled. One model utilises RELAP5 for the ECS, the other Aspen Custom Modeler (ACM). The reactor model used in both models is a point kinetic model derived from a detailed reactor model. The ECS model is described and compared componentwise, with an emphasis on the turbomachinery. The total plant models are compared with each other by calculating two representative transients: one load rejection transient and one transient with the system at part load.