Effect of dynamic strain ageing on the tensile properties of a modified 9Cr–1Mo steel

Tensile testing of a modified 9Cr–1Mo steel in two microstructural conditions (710T– normalized at 1100°C, tempered at 710°C, and 550T – normalized at 1100°C tempered at 550°C) in the temperature range 25–450°C, under strain rates of 2.3×10-5–2.3×10-3s-1, exhibited serrated flow curves, with serrations appearing almost at the onset of deformation and disappearing before ultimate strengths were attained. The serrated flow curves (characteristics of dynamic strain ageing) were accompanied by increased ultimate strengths, loss of ductility and negative strain-rate sensitivity, relative to the ambient temperature properties. However, the increase in ultimate strength and the reduction in ductility were much larger for 710T specimens, as compared to 550T ones. In the dynamic strain ageing regime, the work-hardenability of 710T specimens increased rapidly while that of 550T specimens remained practically unaffected. Based on the microstructural consideration and the observed activation energy of 45 kJ mol-1, it is proposed that serrations are initiated by a nitrogen atmosphere formation on the waiting dislocations by a pipe diffusion mechanism, and they disappear by diffusion to the precipitate sinks during deformation. Because the fine alloy carbide precipitates in 550T specimens are more effective sinks than those of 710T ones, they can cause much faster depletion of the atmosphere, resulting in a much smaller effect of dynamic strain ageing on the tensile properties of 550T specimens.     

Identification of stress-induced leakage current components and thecorresponding trap models in SiO2 films [MOStransistors]

Time-decay stress-induced leakage current (SILC) has been systematically investigated for the cases of both Fowler-Nordheim (FN) stress and substrate hot-hole stress. From the three viewpoints of the reproducibility of the current component for the gate voltage scan, the change of oxide charge during the gate voltage scan, and the resistance of the current component to thermal annealing, it has been found that time-decay stress-induced leakage current is composed of five current components, regardless of stress type. Trap models corresponding to each current component have been proposed. In addition, it has also been proven that holes generate the electron traps related to one of those current components     

Differential modes of nuclear localization signal (NLS) recognition by three distinct classes of NLS receptors

The targeting of karyophilic proteins to nuclear pores is mediated via the formation of a nuclear pore-targeting complex, through the interaction of nuclear localization signal (NLS) with its NLS receptor. Recently, a novel human protein, Qip1, was identified from a yeast two-hybrid system with DNA helicase Q1. This study demonstrates that Qip1 is a novel third class of NLS receptor that efficiently recognizes the NLS of the helicase Q1. Moreover, the data obtained in this study show that the specific interaction between Qip1 and the NLS of the helicase Q1 requires its upstream sequence of the minimal essential NLS. By using purified recombinant proteins alone in the digitonin-permeabilized cell-free transport system, it was demonstrated that the two known human NLS receptors, Rch1 and NPI-1, are able to transport all the tested NLS substrates into the nucleus, while Qip1 most efficiently transports the helicase Q1-NLS substrates, which contain its upstream sequence in so far as we have examined the system. Furthermore, in HeLa cell crude cytosol, it was found that endogenous Rch1 binds to all the tested NLS substrates, while the binding of endogenous NPI-1 is restricted to only some NLSs, despite the fact that NPI-1 itself shows binding activity to a variety of NLSs. These results indicate that at least three structurally and functionally distinct NLS receptors exist in the human single cell population, and suggest that the nuclear import of karyophilic proteins may be controlled in a complex manner at the NLS recognition step by the existence of a variety of NLS receptors with various specificities to each NLS.     

Rectus abdominis muscle flap (RAMF) technique for the management of bladder exstrophies: late clinical outcome and urodynamic findings

OBJECTIVE: To investigate the efficacy of the rectus abdominis muscle flap (RAMF) technique for the closure and augmentation of small, non-compliant bladder exstrophies. PATIENTS AND METHODS: The RAMF technique was used in two girls and two boys (mean age at operation, 31.7 months, range 3-72) with bladder exstrophy. The clinical outcome and urodynamics were assessed during a follow-up of 29 months to 6 years (mean 49.2 months) and included imaging, cystoscopy, biochemical and microbiological studies. RESULTS: There were no urinary tract infections, metabolic problems or electrolyte disturbances and kidney function remained normal in all patients. Radiography confirmed intact function and anatomy of the urinary tract and cystoscopy showed complete coverage of the inner peritoneal layer of RAMF with uroepithelium. No stone formation or mucus production were detected. Currently, three patients void using clean intermittent catheterization through the native urethra and the fourth through an appendiceal Mitrofanoff valve. However, the bladder volume was insufficient at the late follow-up and three patients required bladder augmentation. CONCLUSIONS: The RAMF technique is a good alternative for closing bladder exstrophies and achieves an increase in bladder capacity; however, although there is a mild improvement in bladder capacity and compliance. RAMF should not be used as a bladder augmentation procedure. The technique is indicated in the closure of large bladder defects, bladder exstrophies with small, inelastic, non-compliant bladder remnants and failed primary closures.     

Chaos control and noise suppression in external-cavitysemiconductor lasers

Feedback-induced chaos and intensity noise enhancement in a laser diode with external optical feedback are studied by computer simulations. The enhancement of relative intensity noise (RIN) that is often observed in experiments is considered as a result of the feedback-induced deterministic chaos and the intensity noise suppression is treated from the viewpoint of chaos control. Especially, the conventional noise suppressing technique known as a high-frequency injection modulation is turned into a problem of stabilizing chaos through parameter modulations. We developed an analytical method which allows to optimize the modulation frequency from the linear stability analysis of the dynamical model that describes the laser diode with external feedback. The robustness of the modulation with respect to the modulation frequency and depth is verified and the results suggest the feasibility of applying our method to actual noise suppression. The RIN in the low-frequency region (up to 100 MHz) is shown to be reduced to the solitary laser level when the feedback-induced chaos is effectively controlled with the optimized modulation frequency     

Optimization — a tool in advanced materials technology

This paper demonstrates the use of simple optimization techniques in the production of two advanced materials - a fibre-reinforced composite laminate and a transformation toughened ceramic - having enhanced mechanical properties. Both example materials are based on a brittle matrix prone to cracking at very low applied stresses. The optimization process aims at altering the microstructure so that the materials have enhanced resistance to crack propagation without any undesirable side effects.     

Genetic marking shows that Ph+ cells present in autologous transplants of chronic myelogenous leukemia (CML) contribute to relapse after autologous bone marrow in CML

Relapse after autologous bone marrow transplantation for chronic myelogenous leukemia (CML) can be due either to the persistence of leukemia cells in systemic tissues following preparative therapy, or due to the persistence of leukemia cells in the autologous marrow used to restore marrow function after intensive therapy. To help distinguish between these two possible causes of relapse, we used safety-modified retroviruses, which contain the bacterial resistance gene NEO, to mark autologous marrow cells that had been collected from patients early in the phase of hematopoietic recovery after in vivo chemotherapy. The cells were then subjected to ex vivo CD34 selection following collection and 30% of the bone marrow were exposed to a safety-modified virus. This marrow was infused after delivery of systemic therapy, which consisted of total body irradiation (1,020 cGy), cyclophosphamide (120 mg/kg), and VP-16 (750 mg/m2). RT PCR assays specific for the bacterial NEO mRNA, which was coded for by the virus, and the bcr-abl mRNA showed that in two evaluable CML patients transplanted with marked cells, sufficient numbers of leukemia cells remained in the infused marrow to contribute to systemic relapse. In addition, both normal and leukemic cells positive for the retroviral transgenome persisted in the systemic circulation of the patients for at least 280 days posttransplant showing that the infused marrow was responsible for the return of hematopoiesis following the preparative therapy. This observation shows that it is possible to use a replication-incompetent safety-modified retrovirus in order to introduce DNA sequences into the hematopoietic cells of patients undergoing autologous bone marrow transplantation. Moreover, this data suggested that additional fractionation procedures will be necessary to reduce the probability of relapse after bone marrow transplantation in at least the advanced stages of the disease in CML patients undergoing autologous bone marrow transplantation procedures.