Materialien für die Brillenbeschichtung in Aufdampfanlagen

Materials for ophthalmic coatings in PVD – coating equipments In our days we cannot have an isolated view only at the coatings for organic lenses. We need to analyse the interaction of substrates, hardcoats and layerdesigns to deliver a longlife – quality of the complete complex “eyeglases”. Special in the field of organic substrates we could observe in the last years an enormous change. The push to deliver more and more thinner and lighter lenses, produces materials with higher indices. The result from this problem is not the adaptation of the antireflection desin at the substrate index but the adaption at the mechanical and thermal properties of these substrates. The caoting labs influence at the complete system is more or less reduced only by the antireflection system. The substrate‐ and hardcoat material could be influenced only by the “world player” for ophthalmic systems. All the small and middle size coating labs worldwide must buy the substrates‐ and the hardcoat materials and have to accept the quality. The only exertion of influence is in the selection of film materials for the AR‐coating and the process technology. The right choise of coating material in quality, form and costs is crucial for a high quality AR‐ coating. A multitude of factors must be considered for the selection of the adequate material.     

Comparative study of incorporation of Cl and F into SiO2 during the MCVD process

We report the results of examination of incorporation of chlorine and fluorine into silica as revealed from secondary ion mass spectroscopy (SIMS) and Raman spectroscopy measurements. The samples were preform-like rods made by the MCVD process. SIMS spectra were used for quantitative analysis of Cl concentration in glass. The concentrations of F were obtained from the Raman spectra. Both spectroscopic methods indicated the presence of Si---Cl groups in SiO₂ synthesized from chlorine-rich vapour gaseous blend. The difference in structural roles of Cl and F in chemically deposited silica manifests itself in the efficiency of their bonding to Si and in interaction with intrinsic structural defects.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

Energy expenditures and the actual nutrition of workers in a synthetic leather plant

A study was made of energy expenditures and factual nutrition of the workers engaged in synthetic leather manufacture. Antropometric measurements were also taken. Based on the study of daily energy expenditures, the calculations were made of the optimal requirements of the main substances and energy. The actual nutrition of the workers was found to provide the necessary caloricity covering energy expenditures. However, definite shortcomings were revealed in the structure of the foods consumed, namely insufficient intake of vegetable fats, the prevalence of simple sugars in the structure of carbohydrate component, insufficient intake of vitamins A, B1 and folacin. According to the antropometric measurements 30,4% of the examined workers were obese.     

Effect of intragastric feeding with qualitatively different mixtures on the microflora composition of the intestines in rats

Rats of four groups each holding 6-8 animals were changed over to intragastric nutrition with different mixtures one week after cannula implantation into the stomach. The observation period constituted 15 days. The rats of two other groups were kept on oral feeding with a common diet. As compared to oral feeding, intragastric one led to alterations in the cecum microflora. More profound hydrolysis of the nutrients contained by the mixture produced a more demonstrable increase in the number of enterobacteria, enterococci, staphylococci, and lactobacilli. Intragastric feeding with a mixture without nitrogenous component sharply reduced the number of lactobacilli in the cecum contents.     

Hybrid Link/Path-Based Design for Translucent Photonic Network Dimensioning

The advancement of ultralong-haul transmission technology has dramatically enhanced the all-optical reaches. However, the actual situations of installed fiber and sites for terrestrial network often prevent implementing a purely transparent network, and thus, opaque reshaping retiming regenerating (3R) regeneration is required to guarantee optical signal reachability. Since 3R regenerators based on optical/electrical/optical conversion tend to dominate the total network costs, an efficient network design method that allocates a minimum number of 3R regenerators to optimum locations is essential to build a cost-effective photonic network. In this paper, we propose such a network-dimensioning method by combining the advantages of link-based and path-based design approaches. It first guarantees optical signal reachability for any possible traffic demand in each segmented linear link. After combining all the links, excessive regenerators are eliminated based on the optical signal quality check with -factor calculation for each wavelength path. A trial design of a large-scale mesh network demonstrated a significant cost savings of more than 30% in comparison with a conventional link-based design. In the trial, the impact of fiber loss coefficient over the total network cost was investigated quantitatively, addressing the importance of such quantitative modeling and analysis.     

Use of biocompatible calcium-phosphate glass ceramic BGC in surgical treatment of maxillary cysts

The possibility of using the granulated form of biocompatible material made of calcium-phosphate glass ceramic BGC for treatment of maxillary cysts was demonstrated.     

Stable operation range for laser diodes with an integrated passivecavity in the presence of external optical feedback

It is shown that a laser diode with an integrated passive cavity yields higher tolerable levels of feedback from distant reflections than an equivalent long solitary laser diode. To ensure this high tolerance for external feedback, the internal feedback level in the integrated passive cavity must be of the order of about 10%. Then the laser diode remains stable up to external feedback levels in excess of 1% even if the internal reflection phase is not carefully adjusted. External reflections from a cleaved fiber end are then not sufficient to drive the laser into coherence collapse, if realistic coupling efficiencies between laser diode and fiber are taken into account. The low feedback sensitivity is explained by the combination of the long effective length of the laser and a high relaxation resonance frequency. Therefore, quantum-well laser diodes with a long length and a high relaxation resonance frequency are likewise expected to exhibit low feedback sensitivity