Behavior of a vibrating wire near the liquid3He-vacuum interface and in a saturated3He-4He mixture

In this paper we describe the effect of the vicinity of a liquid³He-vacuum interface on the behavior of a vibrating wire viscometer. It was found that in the fluid near the liquid interface the quality factor is lower than in the bulk liquid. We further report on the observation of a doubling of the resonance peak of the wire in a saturated³He-⁴He mixture. The frequencies and amplitudes of the two peaks strongly depend on the distance between the phase boundary and the vibrating wire; the temperature and the velocity of the phase boundary have no significant influence on the peak frequencies. The observed peak doubling is attributed to the coupling of the vibrating wire with a standing second-sound wave in the dilute phase where the volume of the dilute phase can be regarded as a resonating cavity for second sound.     

Microstructure and mechanical behaviour of 3Y-TZP/Mo nanocomposites possessing a novel interpenetrated intragranular microstructure

Yttria stabilized tetragonal zirconia polycrystal (Y-TZP)/0-100 vol % molybdenum (Mo) composites were fabricated by hot-pressing a mixture of Y-TZP powder containing 3 mol % yttria (Y₂O₃) and a fine Mo powder in vacuum. This composite system possessed a novel microstructural feature composed of an interpenetrated intragranular nanostructure, in which either nanometer sized Mo particles or equivalent sized zirconia (ZrO₂) particles located within the ZrO₂ grains or Mo grains, respectively. The strength and toughness were both greatly enhanced with increasing Mo content for the 3Y-TZP/Mo composites thus breaking through the strength-toughness tradeoff relation in transformation toughened ZrO₂ and its composite materials. They exhibited a maximum strength of 2100 MPa and a toughness of 11.4 MPa·m^1/2 for the composite containing 70 vol % Mo. These simultaneous improvements in strength and toughness were determined to be the result of a decrease in flaw size associated with the interpenetrated intragranular nanostructure, and a stress shielding effect created in the crack tip by the elongated Mo polycrystals bridging the crack tip in addition to the stress induced phase transformation.     

Grenzen der Anwendbarkeit der Theorie der analytischen Signale

Zusammenfassung Bei der praktischen Anwendung der analytischen Signale ist es erforderlich, die Ermittlung der Hilbert-Transformation numerisch durchzuführen. Dazu wurden u.a. Verfahren von H.W. Schü?ler, R. Unbehauen und G. Wunsch vorgeschlagen. In der Arbeit werden allgemeine Ergebnisse zur numerischen Umsetzung der Hilbert-Transformation dargestellt. Es wird gezeigt, da? alle praktisch realisierbaren Verfahren für bestimmte Signale divergieren. Damit ist es m?glich, die in der Experimentalphysik schon l?nger bekannten Schwierigkeiten bei der Umsetzung der Hilbert-Transformation zu erkl?ren.     

The use of stokeslets to describe the arbitrary translation of a disk near a plane wall

A previously presented method is extended to describe the fully three-dimensional Stokes flow generated by the translation in any direction of an arbitrarily oriented disk in fluid bounded by a plane wall. The velocity field is represented solely in terms of stokeslet distributions on the disk, modified to take account of the bounding wall according to the century-old idea of Lorentz. Sets of integral equations of the second kind, not all disjoint, are obtained for the Abel transforms in each Fourier mode of the density functions. However, only a few modes need be considered in determining the flow field to order D ^-3, where D is the distance of the disk axis from the wall. Less detail is required to evaluate the drag force and torque experienced by the disk.     

Magnetization and rotation of MTG HTSC ring in magnetic field

The magnetization of a melt-texture growth (MTG) HTSC ring has been studied. It is shown that the magnetic field inside the ring is larger than the external field under a certain range of external magnetic fields. We have also investigated the magnetic field dependence of the response of a detective coil near a rotating superconducting ring. The responses of the MTG sample are different for different cooling methods.     

A vectorial vibrating reed magnetometer with high sensitivity

A vibrating reed magnetometer with high sensitivity is constructed. Using optical signal pickup, modified excitation coils, and an acoustical reference excitation system, the high sensitivity of former constructions is combined with the detection of the magnetization component perpendicular to the bias field H. The calibration procedure providing increased reliability is simplified and allows hysteresis measurements with the magnetic easy axis of the sample oriented at an arbitrary angle with respect to H. Measurement results are given in order to demonstrate the performance of the apparatus     

Variation of the creep limit and structure of a welded joint in PT-3V titanium alloy under the effect of cyclic loading. Report 2

Comparative analysis of the characteristics of amplitude-dependent internal friction (IF) was carried out to explain reasons leading to an increase of the creep limit of the butt welded joint in PT-3V titanium alloy (PT-2V filler material) after cyclic loading. IF was measured by the method of the direct torsional pendulum on cylindrical specimens representing the gage part of the specimens subjected to preliminary cyclic loading. The data were processed using the Granato-Lucke theory. The results show that the reduction of IF after cyclic loading took place as a result of an increase of the number and redistribution of pinning points of the dislocations. Consequently, the density of mobile dislocations decreases by 8% and the length of dislocation segments by 18%. These processes of stabilization of the structure were completed within 5·10 ⁴ cycles of preliminary loading. Stabilization of the dislocation structure of the material of the welded joint increases its creep limit.Translated from Problemy Prochnosti, No. 4, pp. 35–40, April, 1996.     

The key role of collaborative work in the growth of Brazilian science in the last ten years

The Brazilian scientific production and its international impact increased considerably in the last 10 years. This increase occurred in spite of a reduction in the resources for science in the same period. The data show that the explanation for this apparent paradox lies in the active process of international and national collaboration which increased in this same period. Collaborative work was supported by several programs of the Brazilian agencies. Advantages and possible drawbacks of the intensification of scientific collaboration for the Brazilian science are discussed.     

Materials modelling: A bridge from atoms to bulk properties

The use of molecular-level materials modelling techniques in the development of advanced performance polymers is discussed, with particular emphasis upon bridging the large difference in the scales of dimensions between atomic structure and fabricated parts. The advantages and disadvantages of bulk quantitative structure-property relations and atomistic modelling are assessed, and the method of group interaction modelling is suggested as a means of bridging the dimensional scales.After a brief introduction to the concept of group interaction modelling, examples of modelling the engineering properties of polymers are presented which are difficult to model quantitatively by any other means. The important phase transitions from the crystal and glassy states of matter to those of rubber- and liquidlike states are shown quantitatively to be due to the same isoenergetic condition. The viscoelastic properties of a polymer are critical for many applications and expressions are derived for the loss and storage components of the complex modulus, with reference to failure initiation conditions. The effect of crosslinking in thermosets upon the glass transition temperature and viscoelastic properties is outlined. Finally, the scaling of time from atomic vibrations to the years involved in creep and ageing effects are discussed.     

Study of photosensitive mixtures of TMAE and helium, hydrocarbon or CF4-based carrier gases

Among the photocathodes used for particle identification based on the Cherenkov Ring Imaging technique, the TMAE molecule is still the best in terms of quantum efficiency. Despite the fact that TMAE gaseous photocathodes have already been used in a number of large experiments, one still seeks answers to many detailed questions. We present a systematic study of gaseous photocathodes based on TMAE mixed with helium, hydrocarbon and CF₄-based gases at normal pressure. The study includes a measurement of the electron drift velocity, gas quenching properties, single electron pulse height spectra and anode wire aging. The paper makes recommendations for carrier gas mixtures to obtain the best quenching, and suggests how to manage TMAE wire aging. This study was motivated by a specific particle identification detector proposal, the Fast Drift CRID proposed for the B-factory at SLAC.