Wideband wattmeter based on RMS voltage measurements

A wideband wattmeter for measuring active power over a frequency range of dc to 500 kHz is described. The wattmeter is based on the three-voltmeter method in which three rms voltage measurements are used to calculate power. The wattmeter active power uncertainty is estimated to be within 0.03% from dc to 20 kHz and within 1.5% to 500 kHz     

The development and creating of new-generation full-scope simulator and new technology of simulation

Set out is a brief account of the two major accomplishments by the Russian Research Center ‘Kurchatov Institute’ in creating the full-scope simulators and mathematical modeling technologies. Presented are the basic specifications of one of the world's largest simulators—the full-scope simulator for the Leningrad NPP which is the new-generation one. Owing to the extended modeling scope accomplished is the possibility of training personnel to act in terms of not only the design-basis but rather beyond the design-basis accidents. To minimize the expenditures for creating the simulators, analyzers and other modeling and control means, the RRC ‘Kurchatov Institute' has created the unique technology of mathmodeling automation. Thanks to its versatility and application at its creation of the ELUD philosophy (easy to learn, use and develop) good use is made of this technology both in nuclear and thermal power engineering, as well as in gas industry.     

Structural allograft in two-stage revisions for failed septic hip arthroplasty

We report 11 patients having revision of total hip arthroplasty using massive structural allografts for failure due to sepsis and associated bone loss. All patients had a two-stage reconstruction and the mean follow-up was 47.8 months (24 to 72). Positive cultures were obtained at the first stage in nine of the 11 patients, with Staphylococcus epidermidis being the most common organism. The other two patients had draining sinuses with negative cultures. There was no recurrence of infection in any patient. The mean increase in the modified Harris hip score was 45 and all the grafts appeared to have united to host bone. Two patients required additional procedures, but only one was related to the allograft. Complications included an incomplete sciatic nerve palsy and one case of graft resorption. Our results support the use of massive allografts in failed septic hip arthroplasty in which there is associated bone loss.     

Tomsk complex for neutron-transmutation doping of silicon

All-Union Scientific-Research Institute of Nuclear Physics at the S. M. Kirov Tomsk Polytechnical University. Translated from Atomnaya énergiya, Vol. 79, No. 1, pp. 38–40, July, 1995.     

Efficacy and pharmacokinetics of gallopamil in patients with coronary artery disease

We prospectively studied 10 patients with stable exertional ischaemia, selected from a larger group of patients referred for suspected coronary artery disease or to detect residual ischaemia after myocardial infarction, to evaluate pharmacokinetic changes during chronic treatment with gallopamil and its correlation with clinical efficacy in patients with coronary artery disease. Our study consisted of a 1-week run-in single-blind placebo treatment and a 4-week single-blind gallopamil treatment. At the end of the run-in period patients underwent two different exercise tests, the first 2 hours and the second 7 hours after placebo administration. During active treatment all patients underwent two different exercise tests, the first 2 hours and the second 7 hours after gallopamil (50 mg) administration on the 1st and 28th days of gallopamil therapy. On the same days in eight of the patients we evaluated gallopamil pharmacokinetic changes. Our data revealed a rapid increase of unchanged gallopamil and its metabolite (norgallopamil) in the plasma, and a peak concentration of these substances about 2 hour after oral administration on both the 1st and 28th day of observation. Moreover, our results demonstrated an increase between the first and 28th day of treatment in peak concentration of unchanged gallopamil in the plasma, and of AUC 0-infinity and AUC o-c values during chronic treatment with gallopamil. Our clinical data showed an improvement in exercise results during gallopamil therapy related to increased concentration of the drug.     

Transcutaneous measurement and spectrum analysis of heart wallvibrations

For the noninvasive diagnosis of heart disease based on the acoustic and elastic characteristics of the heart muscle, it is necessary to transcutaneously measure small vibration signals, including components with an amplitude of less than 100 μm, from various parts of the heart wall continuously for periods of more than several heartbeats in a wide frequency range up to 1 kHz. Such measurement, however, has not been realized by any ultrasonic diagnostic methods or systems to date. By introducing the constraint least-square approach, this paper proposes a new method for accurately tracking the movement of the heart wall based on both the phase and magnitude of the demodulated signal to determine the instantaneous position of the object so that the vibration velocity of the moving object can be accurately estimated. By this method, small vibrations of the heart wall with small amplitudes less than 100 μm on the motion resulting from a heartbeat with large amplitude of 10 mm can be successfully detected with sufficient reproducibility in the frequency range up to several hundred Hertz continuously for periods of about 10 heartbeats. The resultant small vibration is analyzed not only in the time domain, but also in the frequency domain. As confirmed by the preliminary experiments herein reported, the new method offers potential for research in acoustical diagnosis of heart disease     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described