Evaluation of microstructure and mechanical properties in friction stir processed SKD61 tool steel

A SKD61 tool steel was friction stir processed using a polycrystalline cubic boron nitride tool. Microstructure, tensile properties and wear characteristic were evaluated. Fine grains with a martensite structure were produced in the friction stir processed zone, which led to the increase of the microindentation hardness. The grains became finer when the heat input was lowered. The transverse tensile strength of the friction stir processed zone was equal to that of base metal and all the tensile specimens fractured at base metal zone. The wear width and depth of the friction stir processed zone at the load of 1.96 N were 339 μm and 6 μm, as compared to 888 μm and 42 μm of the base metal, decreased by 62% and 86%. Findings of the present study suggest that low heat input is an effective method to produce a friction stir processed zone composed of relatively fine grain martensitic structure with good tensile properties and wear characteristic.     

Fabrication of micro-patterned TiO2 thin films incorporating Ag nanoparticles

A photosensitive TiO₂ thin film embedded with Ag nanoparticles has been prepared from a Ti(OBu)₄–acetylacetone solution, containing dispersed Ag nanoparticles, by the sol–gel method. UV–visible absorption spectra showed that the thin film obtained has two absorption bands, characteristic of the acetylacetone chelate rings and plasmon resonance from Ag nanoparticles. After the irradiation of UV light, the absorption band from the chelate rings almost disappeared, ascribed to structural changes associated with dissociation of the chelate rings. The thin film after the UV irradiation exhibited a broad absorption band in the IR spectrum, indicating that a Ti–O–Ti network was formed in the thin film. HRTEM and EDX spectra revealed that Ag nanoparticles were present and dispersed in the TiO₂ thin film. Micro-patterns of 50 μm dots have been fabricated by UV irradiation through a corresponding photomask, followed by leaching.     

Economic analysis on small-scale forest biomass gasification considering geographical resources distribution and technical characteristics

Biomass is getting the great interest in Japan, and the cabinet approved “Biomass Nippon Strategy” in 2002 to promote the utilization of biomass. Although various projects utilizing wood biomass for energy uses have started already, many of them utilize mainly waste wood. Forest biomass remains unutilized because of the high logistic cost and the small scale of resource generation at a site. Small-scale gasification is considered as a suitable technology for forest biomass, and more than 10 demonstration plants have started to be operated recently. This study analyzes the economic feasibility of the small-scale forest biomass CHP system with gasification technology in Japan.The authors have developed the BiRReT tool, which takes input data such as geographical resource distribution and scale merit information of the target technology, and analyzes the economics of bioenergy system in target region by finding the optimal conditions; namely plant size, plant location, the number of plants, and lower generation costs. A case study in Miyagi prefecture revealed the conclusion that the system with logging residue fuel has the economic feasibility if the capital cost and the resource price will decrease from the BAU case by technological learning in the future. On the other hand, thinned wood will not be utilized as a fuel for power plants due to high fuel production cost. It is also found by the tool analysis that the technology’s scale merit has stronger impact on power generation cost in the trade-off between scale merit and the transportation cost.     

Modeling technological learning and its application for clean coal technologies in Japan

Estimating technological progress of emerging technologies such as renewables and clean coal technologies becomes important for designing low carbon energy systems in future and drawing effective energy policies. Learning curve is an analytical approach for describing the decline rate of cost and production caused by technological progress as well as learning. In the study, a bottom-up energy-economic model including an endogenous technological learning function has been designed. The model deals with technological learning in energy conversion technologies and its spillover effect. It is applied as a feasibility study of clean coal technologies such as IGCC (Integrated Coal Gasification Combined Cycle) and IGFC (Integrated Coal Gasification Fuel Cell System) in Japan. As the results of analysis, it is found that technological progress by learning has a positive impact on the penetration of clean coal technologies in the electricity market, and the learning model has a potential for assessing upcoming technologies in future.     

Three-dimensional evaluation of an independent multi-walled carbon nanotube probe by tomography with high-resolution transmission electron microscope

We evaluated an independent multi-walled carbon nanotube (MWNT) probe by using tomography with a high-resolution transmission electron microscope to verify the three-dimensional structure of the probe tip. The new method of probe evaluation revealed the following features: (i) cutting the end of the MWNT probe caused the wall structure to disintegrate and encapsulated the graphene sheets fragmented by the discharged pulse; (ii) the cap of the MWNT probe was an open cylinder covered by walls similar in shape to a rectangular slit; (iii) the grooves of the inner walls of the MWNT probe, which were created by the discharge cutting method, maintained a cylindrical shape that was different from the peeling-off mechanism.     

p53 protein overexpression as a predictor of the response to chemotherapy in gastric cancer

This study was performed to evaluate p53 overexpression as a predictor of the response to chemotherapy of patients with gastric cancer. The subjects comprised 20 patients with Stage IV gastric cancer and three with locally recurrent lesions, all of whom were treated with 5-fluorouracil (5-FU) plus cisplatin (CDDP) for 4 weeks. Of the total 23 patients there were 10 responders; 2 showing complete response (CR) and 8, partial response (PR). Specimens obtained by endoscopic biopsy were immunohistochemically stained using anti-p53 protein and bcl-2 protein antibody. Of the 10 responders, 7 demonstrated negative p53 staining, and of the 13 nonresponders, 11 demonstrated positive p53 staining (P = 0.013). Tissue from 3 of the responders and 7 of the nonresponders that stained for bcl-2 were positive prior to chemotherapy; however, there was no association between bcl-2 staining and chemotherapeutic effect. In conclusion, immunohistochemical identification of p53 in pretreatment tissue may represent a useful predictor for chemotherapeutic outcome in patients with gastric cancer.     

Bronchial hyperresponsiveness before and after percutaneous transluminal mitral commissurotomy in patients with mitral stenosis

To study the effects of percutaneous transluminal mitral commissurotomy (PTMC) on bronchial responsiveness to inhaled methacholine in patients with mitral valve stenosis (MS), methacholine inhalation tests and pulmonary function tests were done in 10 patients with MS before and one week after PTMC. The mean log cumulative dose producing a 35% decrease in respiratory conductance (PD35Grs) was significantly higher after PTMC in nine patients in whom PTMC was successful (p < 0.05). There were no significant changes in the results of pulmonary function tests after PTMC. One patient had severe mitral regurgitation after PTMC, and a decrease in PD35Grs. Six of the other nine patients in whom PTMC was successful continued to be hyperresponsive to inhaled methacholine. These data show that bronchial hyperresponsiveness in patients with MS is less severe after PTMC, concomitant with the relief of pulmonary congestion, and they suggest that the remaining bronchial hyperresponsiveness is responsible for peripheral airway narrowing with organic remodeling.     

Epidemiological study of prevalence of genogroup II human calicivirus (Mexico virus) infections in Japan and Southeast Asia as determined by enzyme-linked immunosorbent assays

Mexico virus (MXV) is a genogroup II human calicivirus (HuCV). We conducted an epidemiological study to determine the prevalence of MXV infection in infants and adults in Japan and Southeast Asia by enzyme-linked immunosorbent assays (ELISAs) developed by using baculovirus-expressed recombinant MXV (rMXV) capsids. Of 155 stool specimens obtained from children younger than 10 years old with acute clinical gastroenteritis (diarrhea and vomiting) associated with small, round-structured viruses in Japan from 1987 to 1989, only 2 were positive for MXV antigen. In 42 outbreaks of acute gastroenteritis in Japan from 1986 to 1994, 1 in an infant home and 1 among adults were positive for MXV antigen. The pattern of acquisition of antibody to rMXV was different from that of acquisition of antibody to group A rotavirus, the prototype HuCV Sapporo virus, and Norwalk virus. The prevalence of antibody to rMXV remained low for the first 3 years of life, showed a steep rise during nursery school age, reaching a prevalence of 50%, and another steep rise during adolescence, reaching 80%; and steadily increased thereafter. A high prevalence of antibody (82 to 88%) was observed in adult populations in Japan and Southeast Asia, suggesting that MXV infection is common in these areas. The discrepancy between the high prevalence of antibody to MXV and a low rate of detection of MXV antigen may be explained by a high specificity of the antigen ELISA for the prototype and closely related MXV strains while serological responses can detect responses to a broader group of viruses.