Band Gap and Diameter Modulation of Quantum Dots in Glasses

Modulation of the band gap energy and diameter of quantum dots (QDs) formed in glasses is important to achieve the optimized performance for applications as infrared light sources, lasers, saturable absorbers, etc. Absorption and photoluminescence of PbS QDs were extended into mid-infrared wavelength range in glasses containing small amount of lead but oversaturated with sulfur. Dual-band photoluminescence of PbSe QDs was prepared in oxyfluoride glass-ceramics containing BaF₂ nanocrystals. By introducing SnO in the glasses, alloyed Pb_1-xSn_xSe QDs with smaller band gap energies were formed in glasses, and mid-infrared photoluminescence of Pb_1-xSn_xSe QDs at ~2570 nm in wavelength was achieved.     

Wear resistance characteristics of materials used in oil sands plants

The surge in demand for natural resources has shifted the focus of the international community toward the development of oil sands, shale oil, shale gas and other non-traditional energy sources. In extreme environments, materials used in petroleum gas plant modules are accompanied by various problems caused by low-temperature brittleness such as damage, corrosion and wear. Many researchers have been conducting studies to discover a suitable material whose lifespan could be improved by performing characteristics analyses and performance assessments. In this study, a material characteristics assessment was conducted based on a wear resistance test on materials that are commonly used at oil sands plants. Prior to a wear resistance test, a chemical composition analysis was performed on each of the specimens, and tensile, impact, hardness and corrosion tests were carried out to examine the correlation between their results with the results of the wear resistance test. Each test was performed according to ASTM G 105 standards, and the change in weight according to wear length was analysed for each material to determine the related tendencies. In addition, the results of the wear test were derived by analysing the change in the mass of the specimen before and after the test, and the surface roughness was assessed to analyse the performance related to wear and define the service life. The aim was to use these results to select a material that would be suitable for the abrasive environment of the key equipment and materials of plants.     

Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

A rapid method for the simultaneous determination of 25 anti-hypertensive compounds in dietary supplements using ultra-high-pressure liquid chromatography

A novel, stable, simple and specific ultra-performance liquid chromatography method with ultraviolet detection (205 nm) for the simultaneous analysis of 25 anti-hypertensive substances was developed. The method was validated according to the International Conference of Harmonisation guidelines with respect to linearity, accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ) and stability. From the ultra-performance liquid chromatography results, we identified the LOD and LOQ of solid samples to be 0.20–1.00 and 0.60–3.00 μg ml^?1, respectively, while those of liquid samples were 0.30–1.20 and 0.90–3.60 μg ml^?1, respectively. The linearity exceeded 0.9999, and the intra- and inter-day precisions were 0.15–6.48% and 0.28–8.67%, respectively. The intra- and inter-day accuracies were 82.25–111.42% and 80.70–115.64%, respectively, and the stability was lower than 12.9% (relative standard deviation). This method was applied to the monitoring of 97 commercially available dietary supplements obtained in Korea, such as pills, soft capsules, hard capsules, liquids, powders and tablets. The proposed method is accurate, precise and of high quality, and can be used for the routine, reproducible analysis and control of 25 anti-hypertensive substances in various dietary supplements. The work presented herein may help to prevent incidents related to food adulteration and restrict the illegal food market.     

Diphlorethohydroxycarmalol isolated from Pae (Ishige okamurae) protects high glucose-induced damage in RINm5F pancreatic β cells via its antioxidant effects

Pancreatic β cells are very sensitive to oxidative stress and this may play an important role in β cell death in diabetes. The protective effect of diphlorethohydroxycarmalol (DPHC), one of phlorotannin polyphenol compound purified from pae (Ishige okamurae) against high glucoseinduced oxidative stress was investigated using RINm5F pancreatic β cells. High glucose (30 mM) treatment induced RINm5F pancreatic β cells cell death, but DPHC, at concentration 10 or 50 μg/mL, significantly inhibited the high glucose-induced glucotoxicity and apoptosis. Furthermore, treatment with DPHC dose-dependently decreased thiobarbituric acid reactive substances (TBARS), intracellular reactive oxygen species (ROS) generation and nitric oxide level increased by high glucose. In addition, DPHC treatment increased activities of antioxidant enzymes including catalase (CAT), superoxide dismutase (SOD), and glutathione peroxidase (GSH-px) in high glucose pretreated RINm5F pancreatic β cells. DPHC treatment improved the secretory responsiveness following stimulation with glucose. These findings indicate that DPHC might be used as potential nutraceutical agent which will protect the glucotoxicity caused by hyperglycemia-induced oxidative stress associated with diabetes.     

Analysis of kimchi microflora using denaturing gradient gel electrophoresis

A polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) technique was used to determine the microfloral composition during the fermentation of kimchi, a traditional Korean fermented vegetable food. The kimchi was fermented at 10 degrees C or 20 degrees C for 30 or 20 days, respectively. DGGE of the partially amplified 16S rDNA was performed and the most intense bands sequenced. The application of this culture-independent molecular technique determined that the lactic acid bacteria Weissella confusa, Leuconostoc citreum, Lactobacillus sakei, and Lactobacillus curvatus were the main microorganisms responsible for kimchi fermentation.     

Pr3+/Er3+ Codoped Ge-As-Ga-S Glasses as Dual-Wavelength Fiber-optic Amplifiers for 1.31 and 1.55 μm Windows

Fluorescence emissions at both 1.31 and 1.55 μm communication windows were observed from Pr³⁺/Er³⁺ codoped Ge-As-Ga-S glasses with a single wavelength pumping at 986 nm. The lifetime of the Er³⁺:⁴ I _11/2 level decreased as the Pr³⁺ concentration increased, and that of the Pr³⁺:¹ G ₄ level increased as the Er³⁺ concentration increased. Energy transfer from the Er³⁺:⁴ I _11/2 level to the Pr³⁺:¹ G ₄ level was responsible for emission of the 1.31 μm fluorescence from the Pr³⁺:¹ G ₄ level. Ge-As-Ga-S glasses that have been doped with Pr³⁺ and Er³⁺ cations are promising amplifier materials for both 1.31 and 1.55 μm communication windows.     

2-D WO3 decorated with Pd for rapid gasochromic and electrical hydrogen sensing

The ultrathin two-dimensional (2D) nanomaterials display unique properties owing to their ultrahigh specific surface area and strong quantum confinement of electrons in two dimensions. In this work, we fabricated a rapid gasochromic and electrical hydrogen sensing system containing 2D WO₃ and Pd nanoparticles. 2D WO₃ nano-plates (NP) are synthesized using sol–gel method and Pd nanoparticles are coated on WO₃ by green photochemical deposition method. The sensor is fabricated by dispersing the 2D WO₃/Pd composite on filter paper. In presence of hydrogen gas, 2D WO₃/Pd composite produces visible change in color from brown to dark blue. With the fabricated sensor, as low as 0.1% H₂ gas in air at room temperature can be easily detected using electrical sensing scheme whereas for higher concentration from 1 to 100%, eye readable gasochromic scheme can be utilized. The use of 2D WO₃ decreased the response time in great deal compared to WO₃ nanoparticles indicating the advantage of 2D structure in fabricating rapid response H₂ sensors. The proposed method is simple and can be easily employed to large scale fabrication system for commercial applications.