Densification and Cell Performance of Gadolinium-Doped Ceria (GDC) Electrolyte/NiO–GDC Anode Laminates

A thin film (60 μm thick) of a gadolinium-doped ceria (GDC) electrolyte was prepared by the doctor blade method. This film was laminated with freeze-dried 42 vol% NiO–58 vol% GDC mixed powder and pressed uniaxially or isostatically under a pressure of 294 MPa. This laminate was cosintered at 1100 °–1500 °C in air for 4–12 h. The laminate warped because of the difference in the shrinkage of the electrolyte and electrode during the sintering. A higher shrinkage was measured for the electrode at 1100 °–1200 °C and for the electrolyte at 1300 °–1500 °C. The increase of the thickness of anode was effective in decreasing the warp and in increasing the density of the laminated composite. The maximum electric power density with a SrRuO₃ cathode using 3 vol% H₂O-containing H₂ fuel was 100 mW/cm² at 600 °C and 380 mW/cm² at 800 °C, respectively, for the anode-supported GDC electrolyte with 30 μm thickness.     

Metabolism of odd-numbered fatty acids and even-numbered fatty acids in mouse

Fatty acids are converted into energy via beta-oxidation. Although almost all natural occurring fatty acids are even-numbered, there are some odd-numbered fatty acids too. The details of the metabolism rate of odd-numbered fatty acids, however, are not clear. In the present study, we simultaneously administered a triacylglycerol containing four types of labeled even-numbered (palmitic acid and stearic acid) and odd-numbered (pentadecanoic acid and heptadecanoic acid) fatty acids to mice to compare the rates of their metabolism. The rates of metabolism were evaluated based on the accumulation of the labeled fatty acids in the small intestine epithelium, liver, and epididymal fat. Odd-numbered fatty acids accumulated mainly in the epididymal fat. In contrast, there was no accumulation of even-numbered fatty acids observed in the small intestine epithelium, liver, or epididymal fat. These results suggest that odd-numbered fatty acids might not be favorable substrates for beta-oxidation-related enzymes.     

In Situ Measurement of Bridging Stresses in Toughened Silicon Nitride Using Raman Microprobe Spectroscopy

Bridging stresses that result both from elastic tractions and frictional interlocking in the wake of an advancing crack have been evaluated quantitatively via in situ Raman microprobe spectroscopy in a toughened Si₃N₄ polycrystal. Crack opening displacement (COD) profiles of bridged cracks also have been measured quantitatively via scanning electron microscopy to substantiate the piezospectroscopic determination of microscopic stresses via Raman spectroscopy. The highest spatial resolution of the stress measurement in the Raman apparatus was 1 µm, as dictated by the optical lens that was used to focus the laser on the sample. Measurements of the bridging stresses were performed both at fixed sites (as a function of the applied load) and along the profile behind the crack tip (under a constant load). Rather high stress values (i.e., 0.4-1.1 GPa) were measured that corresponded with unbroken ligaments that bridged the crack faces in elastic fashion, whereas frictional sites were typically under a lower tensile stress (0.1-0.5 GPa). Mapping the near-tip COD profile and the bridging stresses at the (normal) critical load for catastrophic fracture enabled us to calculate the crack-tip toughness and to explain the rising R -curve behavior of the material. From a comparison with conventional fracture-mechanics data, a self-consistent view of the mechanics that govern the toughening behavior of the Si₃N₄ polycrystal could be obtained. In particular, crack bridging is proven to be, by far, the most important mechanism that contributes to the toughening of polycrystalline Si₃N₄ materials.     

Preparation and mechanical properties of polystyrene–clay hybrids

Polystyrene–clay hybrids (PSCHs) were prepared by melt blending a styrene vinyloxazoline copolymer with organophilic clay. In the PSCHs, the silicate layers of the clay were delaminated and dispersed homogeneously to the nanometer level. The moduli of the PSCHs were higher than that of the PS copolymer. For example, the tensile modulus of the PSCH with 5 wt % clay was 1.4 times higher compared to that of the PS copolymer. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3359–3364, 1999     

Mixing in multiple-impeller stirred tank reactors with boiling liquids

Mixing in a boil-off mechanically stirred tank reactor with multiple impellers was examined. Power consumption and gas hold-up were measured in boiling water in a 0.2 m i.d. stirred tank reactor with three four-pitched blade downflow disk turbines. Vapour was generated from both the immersed ring heater and the impellers. At low vapour generation rates, vapour was mainly generated from the impellers rather than from the heater, whereas nucleation occurred at the heater instead of the impeller at higher vapour generation rates. The mechanical power consumption decreased due to vapour generation. The change in boiling-to-non-boiling mechanical power ratio with varying impeller rotational speed and boiling rate was complicated and not monotonous except at higher impeller speeds and boiling rates. The gas hold-ups increased with increasing vapour generation rate but were rather small as compared to those in cold gas dispersing systems. Empirical correlations for power consumption and gas hold-up in boiling liquids were developed using the present experimental data.     

Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs

The application of an inkjet printing process for fabricating solid oxide fuel cell (SOFC) cathodes was investigated. Stably-dispersed LSCF–GDC inks were prepared by ball milling, and the composition was easily controlled by the preparation process. Fabrication of an LSCF–GDC layer was successfully carried out by depositing dots and the thickness was easily controlled by repeating printing process. A planar SOFC single cell with a double-layered cathode (comprised of a paste painted cathode layer and an inkjet printed interlayer) achieved a maximum power density of 0.71 W/cm² at 600 °C. This is the preliminary work for fabricating the cathode layer of a SOFC single cell via inkjet printing.     

Reaction joining of SiC ceramics using TiB2-based composites

SiC ceramics were reaction joined in the temperature range of 1450–1800 °C using TiB₂-based composites starting from four types of joining materials, namely Ti–BN, Ti–B₄C, Ti–BN–Al and Ti–B₄C–Si. XRD analysis and microstructure examination were carried out on SiC joints. It is found that the former two joining materials do not yield good bond for SiC ceramics at temperatures up to 1600 °C. However, Ti–BN–Al system results in the connection of SiC substrates at 1450 °C by the formation of TiB₂–AlN composite. Furthermore, nearly dense SiC joints with crack-free interface have been produced from Ti–BN–Al and Ti–B₄C–Si systems at 1800 °C, i.e. joints TBNA80 and TBCS80, whose average bending strengths are measured to be 65 MPa and 142 MPa, respectively. The joining mechanisms involved are also discussed.     

Structural estimation of particle arrays at air–water interface based on silica particles with well‐defined and highly grafted poly(methyl methacrylate)

Silica nanoparticles with well‐defined, highly grafted dense poly(methyl methacrylate) (MMA) were prepared by surface‐initiated activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) of methyl methacrylate with an initiator‐fixed silica particle in the presence of air. Two different polymerizations of MMA were carried out under the same conditions using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) and N,N,N′,N′,N″‐pentamethyldiethylene‐triamine (PMDETA) as the ligand, respectively. In the CuCl₂/PMDETA system, polymerization appeared to be more controlled with a lower polydisperisty compared with the CuCl₂/Me₆TREN system. The monolayer of these particles was formed at the air–water interface using Langmuir‐Blodgett (LB) technique. Multilayers of the particles were fabricated by repetition of LB depositing. A surface pressure–area (π–A) measurement and SEM observation were used to characterize the particle arrays. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

An innovative modularity of heat circulation for fractional distillation

A novel modularity of heat circulation for distillation process, which reduces the energy consumption, is proposed. By incorporating compressors and heat exchangers, the heat of the distillate is recuperated and exchanged with the heat of the feed streams. The proposed technology achieves the reduction in the required energy more than 75% as compared with a benchmark process which uses external heat source for heating. This shows the proposed modularity of heat circulation for distillation process is very promising technology to drastically reduce energy demand for distillation.     

Synthesis and characterization of fluorene-carbazole and fluorene-phenothiazine copolymers with carbazole and oxadiazole pendants for organic light emitting diodes

We report the synthesis and characterization of new series of the fluorene based polymers with carbazole and oxadiazole pendants for the generation of the white emission out of the EL device. In the fluorene backbone, hole transporting units such as carbazole or phenothiazine were incorporated to improve the EL brightness and efficiency. The PFCzOxd-co-PCzs and PFCzOxd-co-PPTZs in EL spectra showed maximum peaks at around 430 nm and additional large peaks at around 530 and 500 nm, respectively. In case of PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz, the EL spectra of the polymers showed two distinct peaks comprising the maximum at 427 nm, which corresponds to the EL spectra of the conjugated backbone, and additional broad peaks at around 540 and 530 nm, respectively. The CIE coordinates of the devices from PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz were (0.28, 0.33) and (0.25, 0.32), respectively, approaching the value of the standard white of National Television System Committee (NTSC) (0.33, 0.33).