High‐efficacy drive of spatial positive‐column‐discharge PDP with delayed D pulses

Abstract— A thick‐film ceramic‐sheet PDP provides a long sustain discharge gap of 0.45 mm, enabling the use of positive column discharges. The discharges are established in the middle of the discharge space and are completely free from touching the surface of substrates. This allows for the reduction in diffusion losses of the charged particles. To further improve the efficacy, delayed D pulses are applied to the address electrodes during the sustain period. Although the pulses only draw a little current, they perturb the electric field, reducing the peak discharge current and hence resulting in higher efficacy and luminance. The efficacy and luminance increase by 35% and 38%, respectively, with the delayed D pulses. These pulses are incorporated into the contiguous‐subfield erase‐addressing drive scheme for TV application. A short gap of 70 μm between the sustain and data electrodes generates a fast‐rising discharge and allows a high‐speed addressing of 0.25 μsec. This provides 18 contiguous subfields for the full‐HD single‐scan mode, with 70% light emission duty. A luminous efficacy of 6.0 lm/W can been attained using Ne + 30% Xe 47 kPa, a sustain voltage of 320 V, and a sustain frequency of 3.3 kHz, when the luminance is 157 cd/m². Alternatively, the panel can achieve 4.2 lm/W and 1260 cd/m² by increasing the sustain frequency to 33 kHz.     

AGE-RAGE Axis Stimulates Oxidized LDL Uptake into Macrophages through Cyclin-Dependent Kinase 5-CD36 Pathway via Oxidative Stress Generation

Advanced glycation end products (AGEs) are localized in macrophage-derived foam cells within atherosclerotic lesions, which could be associated with the increased risk of atherosclerotic cardiovascular disease under diabetic conditions. Although foam cell formation of macrophages has been shown to be enhanced by AGEs, the underlying molecular mechanism remains unclear. Since cyclin-dependent kinase 5 (Cdk5) is reported to modulate inflammatory responses in macrophages, we investigated whether Cdk5 could be involved in AGE-induced CD36 gene expression and foam cell formation of macrophages. AGEs significantly increased Dil-oxidized low-density lipoprotein (ox-LDL) uptake, and Cdk5 and CD36 gene expression in U937 human macrophages, all of which were inhibited by DNA aptamer raised against RAGE (RAGE-aptamer). Cdk5 and CD36 gene expression levels were correlated with each other. An antioxidant, N-acetyl-l-cysteine, mimicked the effects of RAGE-aptamer on AGE-exposed U937 cells. A selective inhibitor of Cdk5, (R)-DRF053, attenuated the AGE-induced Dil-ox-LDL uptake and CD36 gene expression, whereas anti-CD36 antibody inhibited the Dil-ox-LDL uptake but not Cdk5 gene expression. The present study suggests that AGEs may stimulate ox-LDL uptake into macrophages through the Cdk5–CD36 pathway via RAGE-mediated oxidative stress.     

Crystallization characteristics of intercalated poly(L‐lactide)/organo‐modified montmorillonite hybrids

The crystallization behavior of intercalated Poly(L ‐lactide) (PLLA)/organo‐modified montmorillonite hybrids has been investigated in term of growth of spherulites and bulk crystallization. The PLLA hybrids were prepared via melt‐compounding between PLLA and montmorillonite organo‐modified (organoclay) with two different types of ammonium salts: trimethyl octadecyl‐ or bis(4‐hydroxy butyl) methyl octadecyl ammonium salts. The nucleation rate of PLLA crystallites is slightly enhanced by natural clay, while reduced by organoclay due to the shielding effect and/or miscibility between surfactants of clays and PLLA chains. The incorporation of small amount of organoclay in PLLA matrix shows a tendency to reduce slightly the growth rate and the overall crystallization rate of PLLA crystallites. The secondary nucleation theory was utilized to discuss the crystallization behavior of these hybrids. POLYM. ENG. SCI., 46:39–46, 2006. © 2005 Society of Plastics Engineers     

Selective separation of water from water–ethanol solution through quarternized poly(4-vinylpyridine-co-acrylonitrile) membranes by pervaporation technique

Polymer membranes having cationic charge site, poly(1-alkyl-4-vinylpyridinium iodide-co-acrylonitrile) (alkyl: methyl, butyl, or octyl) were prepared in terms of coulombic interaction for separation of water–ethanol mixtures. The incorporation of cationic charge site into the membrane led to improve not only separation factors (selectivity toward water) but also flux number in the separation of aqueous ethanol solution by pervaporation technique. Target values, which were requested to have from the viewpoint of industrial utilization for separation of aqueous ethanol solution were attained as follows: separation factor toward water over 50 and flux value over 500 g m^?2 h^?1, through poly(1-methyl-4-vinylpyridinium iodide-co-acrylonitrile) (membrane 3 ) (quarternized fraction of pyridinium moiety, 89.5%; mol fraction of pyridinium moiety, 0.034) and poly(1-butyl-4-vinylpyridinium iodide-co-acrylonitrile) (membrane 5 ) (quarternized fraction, 100%; mol fraction of pyridinium moiety, 0.038). It was found that the introduction of cationic charge site into the membrane was one of feasible methods to obtain suitable membranes for water permselective membranes in the separation of water–ethanol mixtures.     

Active transport membrane for chlorine ion

A specific functional group that could interact with ions was introduced in a synthetic membrane to achieve an active transport of ions. One way to synthesize the active transport membrane was to introduce a functional group which has a tautomerism upon pH changes in an aqueous solution. A polymer having pendent N-hydroxyethyl amide groups was synthesized to form a membrane, and the membrane was fixed in a cell as a partition film, in which one side of the solution was adjusted to be acidic and the other side basic. It was then possible to transport chlorine ion through the membrane owing to the carrier functions caused by tautomerism of the N-hydroxyethyl amide group from the acidic to the basic sides. The transport of the chlorine ion was not dependent on diffusion control.     

Less‐ordered lamellar structure of intercalated poly(L‐lactide)/organo‐modified montmorillonite hybrids

Hybrids of poly(L ‐lactide)/organophilic clay (PLACHs) have been prepared via a melt‐compounding process using poly(L ‐lactide) (PLLA) and different contents of surface‐treated montmorillonite modified with dimethyl dioctadecyl ammonium‐salt. The crystalline structures of PLLA and dispersion states of clay particles in those PLACHs were investigated by use of wide‐angle X‐ray diffraction, small‐angle X‐ray scattering, transmission electron microscopy (both cross section and replication modes), and polarized optical microscopy. Those structures are viewed from the conformational changes of PLLA chains in the space of a few nanometer widths between silicate galleries to crystalline lamellae of several nanometer thicknesses, and spherulitic textures more than micrometer sizes. After annealing treatments at 115°C for 1 hr, the PLACHs formed coarse‐grained spherulitic textures with 40 μm diameter composed of less‐ordered and fragmented lamellae, caused by the reduced mobility of the PLLA chain due to the dispersed clay particles in the PLLA matrix and the intercalation of the PLLA chains in the silicate galleries. The formation of the interfibril structure accompanied by the fragmented lamellae among the dispersed clay particles was examined. POLYM. ENG. SCI., 46:703–711, 2006. © 2006 Society of Plastics Engineers     

Relationship between electron sensitivity and chemical structures of polymers as electron beam resist. VII: Electron sensitivity of vinyl polymers containing pendant 1,3-dioxolan groups

Vinyl polymers containing pendant acetal groups were synthesized using (2,2-dimethyl-l,3-dioxolan-4-yl)methyl acrylate (DMA) and (2,2-dimethyl-l,3-dioxo-lan-4-yl)methyl methacrylate (DMM), and were evaluated as negative electron beam (EB) resists. It was found that the EB sensitivity of polymers containing acetal groups in the side chain was higher than that of polymers containing acetal groups in the main chain. A high sensitivity of 3.6 × 10^?8 C/cm² was observed. Copolymers of DMA or DMM with styrene were also synthesized in order to improve the durability for dry etching process. It was found that the copolymers had an excellent dry etching durability and were adaptable to EB lithography.     

Synthesis of high-performance composites by in situ polycondensation and their mechanical properties

High-performance composites of vinylpyridine-styrene copolymers and polyamic acid (PAA) were prepared by the so-called ‘in situ polymerization method’. Poly(4-vinylpyridine-co-styrene) (P4VPy-St) and poly(2-vinyl pyridine-co-styrene) (P2VPy-St) were used as flexible matrix polymers. A molecular composite could be obtained from a polymer pair having an attractive interaction such as a coulombic interaction. Their morphologies were observed by scanning electron microscopy (SEM); mechanical properties of these composites were studied by tensile tests. The PAA content dependence of tensile strength for the composite films obtained by the in situ polymerization method was investigated. The tensile strength of the resulting composite was about 1.5 times higher than that of PAA film. The coulombic interaction between the pyridine moiety in the matrix copolymer and resulting PAA enhanced both the miscibility and mechanical properties of the composites. Furthermore, a polyimide (PI) structure was formed by stepwise heat-treatment and greatly enhanced the tensile strength of the composite films.     

Anomalous Sign Change in Hall Coefficient of κ-(BEDT-TTF)2Cu[N(CN)2]Br Under Pressure

We studied the normal state properties of an organic superconductor, κ- (BEDT-TTF)₂Cu[N(CN)₂]Br, through the measurement of the Hall effect as functions of temperature and pressure. At low pressure, the Hall coefficient shows the peak structure. From the coincidence of the temperature and its pressure evolution with those of anomalies observed in other physical properties, the peak temperature is considered to be T*. At high pressure, we observed the drastic decrease and sign change of the Hall coefficient. From the incompatibility with the behavior of a similar compound, κ- (BEDT-TTF)₂Cu(NCS)₂, we concluded that this behavior originate from the singularity of the Fermi surface of this salt.     

Self‐Template‐Directed Metal–Organic Frameworks Network and the Derived Honeycomb‐Like Carbon Flakes via Confinement Pyrolysis

Metal–organic frameworks (MOFs) have become a research hotspot since they have been explored as convenient precursors for preparing various multifunctional nanomaterials. However, the preparation of MOF networks with controllable flake morphology in large scale is not realized yet. Herein, a self‐template strategy is developed to prepare MOF networks. In this work, layered double‐metal hydroxide (LDH) and other layered metal hydroxides are used not only as a scaffold but also as a self‐sacrificed metal source. After capturing the abundant metal cations identically from the LDH by the organic linkers, MOF networks are in situ formed. It is interesting that the MOF network‐derived carbon materials retain the flake morphology and exhibit a unique honeycomb‐like macroporous structure due to the confined shrinkage of the polyhedral facets. The overall properties of the carbon networks are adjustable according to the tailored metal compositions in LDH and the derived MOFs, which are desirable for target‐oriented applications as exemplified by the electrochemical application in supercapacitors.